LEGO Technic Assembly Instructions
This document provides step-by-step instructions for assembling a mechanical component using LEGO Technic parts.
Step 1
Take one grey axle and insert it through the central hole of a black angled beam with multiple connection points.
Step 2
Insert two black pins into the two outermost holes on one side of the angled beam. Insert one blue pin into the hole adjacent to the axle on the same side.
Step 3
Attach one black 1x16 beam vertically to the top of the structure, aligning its holes with the pins on the angled beam. Attach one black 1x12 beam horizontally to the top of the vertical beam.
Step 4
Insert one black pin into the top hole of the vertical beam. Insert one blue pin into the second hole from the top. Insert two black pins into the third and fourth holes from the top of the vertical beam.
Step 5
Attach one grey connector piece to each of the two outermost pins on the vertical beam.
Step 6
Insert one grey axle into each of the two grey connector pieces.
Step 7
Insert three black pins into the three lowest holes on the vertical beam.
Step 8
Attach one black 1x16 beam to the top of the vertical beam, connecting it via the pins. Attach one black 1x12 beam to the side of the main angled beam. Attach one black 1x10 beam to the other side of the main angled beam.
Step 9
Insert four blue pins into the remaining holes on the vertical beam.
Step 10
Insert three blue pins into specific holes on the vertical beam. Insert one grey axle into a designated connection point on the structure.
Step 11
Attach one black 1x10 beam and one black 1x8 beam to the structure at indicated positions.
Step 12
Insert three black pins and one grey axle into the structure at the specified connection points.
Step 13
Insert two black pins and one grey axle into the structure at the specified connection points.
Step 14
Insert two blue pins into the structure at the specified connection points.
Step 15
Attach two black 1x10 beams and one black 1x8 beam to the structure at indicated positions.
Step 16
Attach one black 1x10 beam and one black 1x8 beam to the structure at indicated positions.
Step 17
Insert two black pins into the structure at the specified connection points.
Step 18
Insert two blue pins into the structure at the specified connection points.
Step 19
Insert four black pins into the structure at the specified connection points.
Step 20
Attach one black 1x16 beam and one black 1x12 beam to the structure at indicated positions.
Step 21
Insert two black pins, attach one grey axle, and connect one black angled beam to the structure at the specified positions.
Step 22
Attach one black connector piece. Insert one grey axle and two additional grey axles into the structure.
Step 23
Attach one black connector piece. Insert two grey axles into the structure.
Step 24
Attach two black connector pieces to the structure at the specified points.
Step 25
Attach two black connector pieces to the structure at the specified points.
Step 26
Attach four black connector pieces to the structure at the specified points.
Step 27
Insert two blue pins into the structure at the specified connection points.
Step 28
Insert four blue pins into the structure at the specified connection points.
Step 29
Attach two black 2x2 plates to the structure at the specified connection points.
Step 30
Connect multiple black and blue pins and axles to the structure at various specified points. This step involves inserting four black pins, two blue pins, one black pin, two blue pins, two black pins, four blue pins, two black pins, two blue pins, and four black pins.
Step 31
Continue connecting multiple black and blue pins and axles to the structure at various specified points. This step involves inserting four black pins, two blue pins, one black pin, two blue pins, two black pins, four blue pins, two black pins, two blue pins, and four black pins.
Step 32
The assembly is now complete, showing the final structure.
