Italeri Volvo F12 Intercooler Low Roof with Accessories (1:24 Scale)

About the Volvo F12

The Volvo F12, produced by the Scandinavian manufacturer between the late 1970s and early 1980s, was a commercially successful truck. It featured innovative technical and design elements for its time. The 'F12' designation refers to the 12-liter displacement of its 6-cylinder turbodiesel engines. Various versions were available to meet customer needs, including different engine solutions and cabin configurations. The 'low roof' model, known for its versatility and compact cabin, was particularly popular.

General Assembly Advice

Attention: This model is intended for adult modelers aged 14 and over.

Before starting assembly, carefully study the instructions. Remove parts from the frames (sprue) using a sharp knife or scissors, and trim away excess plastic. Avoid pulling parts. Assemble parts in numerical sequence. Use only plastic cement sparingly to prevent damage. Black arrows indicate parts to be glued together. White arrows indicate parts to be assembled without glue. Letters (A-B-C...) indicate the frame where parts are located. Paint small parts before detaching them. Remove paint where parts are to be cemented. Parts marked with a cross [❌] must not be used.

Suggested Colors

• A: Flat Black (F.S. 37038) - Italeri Acrylic Paint 4768AP
• B: Metal Flat Steel (F.S. 37178) - Italeri Acrylic Paint 4679AP
• C: Flat White (F.S. 37875) - Italeri Acrylic Paint 4769AP
• D: Flat Pale Green (F.S. 34272) - Italeri Acrylic Paint 4739AP
• E: Gloss Red (F.S. 11302) - Italeri Acrylic Paint 4605AP
• F: Gloss Black (F.S. 17038) - Italeri Acrylic Paint 4695AP
• G: Metal Gloss Silver (F.S. 17178) - Italeri Acrylic Paint 4678AP
• H: Gloss Orange (F.S. 12197) - Italeri Acrylic Paint 4682AP
• I: Flat Light Brown (F.S. 30219) - Italeri Acrylic Paint 4305AP
• L: Flat Sand (F.S. 30475) - Italeri Acrylic Paint 4720AP
• M: Flat Azure Blue (F.S. 35231) - Italeri Acrylic Paint 4308AP
• N: Flat Wood (F.S. 30257) - Italeri Acrylic Paint 4673AP

Sprue Layouts

The kit includes several sprues containing the model parts:

• Sprue A: Contains parts numbered 1 through 42, including engine components, chassis parts, and suspension elements.
• Sprue B: Contains parts numbered 43 through 104, featuring more engine, chassis, and cabin components.
• Sprue C: Contains parts numbered 105 through 132, primarily for the cabin interior and chassis details.
• Sprue D: Contains parts numbered 109 through 130, focusing on cabin interior and chassis elements.
• Sprue E: Contains parts numbered 133 through 148, including cabin parts and chassis details.
• Sprue F: Contains parts numbered 149 through 165, mainly wheels and accessories.
• Sprue G: Contains parts numbered 166 through 175, including accessories and smaller details.
• Sprue H: Contains parts numbered 26 and 27, for accessories.

Assembly Steps

The assembly is divided into numbered steps, detailing the construction process:

Step 1: Engine Block Assembly

Assemble the engine block. Connect part 1a to part 1b. Attach part 1c to this assembly. Connect part 2a to the engine block. Attach part 3a and 3b to the engine. Connect part 4a to the engine. Attach part 5a and 5b to the engine. Connect part 6a to the engine. Attach part 7a to the engine.

Step 2: Chassis Frame Assembly

Assemble the main chassis frame. Connect frame parts 11a, 12a, 13a, 14a, 15a, 16a, 17a, 18a, 19a, 20a, 21a, 22a, 23a, 24a, 25a, 26a, 27a, 28a, 29a, 30a. Note that parts for 'Versions A-C' use frame E, and 'Version B' uses frame F.

Step 3: Front Axle and Suspension

Assemble the front axle and suspension components. Attach parts 22a, 23a, 24a, 25a, 26a, 27a, 28a, 29a, 30a to the chassis frame.

Step 4: Engine Detailing

Detail the engine assembly. Attach parts 31a, 32a, 33a, 34a, 35a, 36a, 37a, 38a, 39a to the engine block.

Step 5: Chassis and Suspension Details

Continue assembling the chassis and suspension. Attach parts 40a, 41a, 42a, 43a, 44a, 45a, 46b, 47b, 48b, 49b, 50b, 51b, 52b, 53b, 54b, 55b, 56b to the chassis and suspension components.

Step 6: Radiator and Fan Assembly

Assemble the radiator and fan unit. Attach parts 46b, 47b, 48b, 49b, 50b, 51b, 52b, 53b, 54b, 55b, 56b to the front of the chassis/engine area.

Step 7: Chassis Integration

Integrate engine, chassis, and suspension. Attach parts 57a through 77a to the main chassis assembly. Note the use of frame E for Versions A-C and frame F for Version B.

Step 8: Rear Axle and Suspension

Assemble and attach the rear axle and suspension components. Connect parts 82b through 88b to the rear chassis.

Step 9: Wheel Assembly

Assemble the wheels. Attach tires to rims. Parts 89f, 91f, 92f, 93f are for the wheels. Two sets of wheels are needed (indicated by '2x').

Step 10: Chassis and Fuel Tanks

Attach fuel tanks (parts 94a, 95a, 96e, 97c, 98e, 99c) and other chassis details. Attach wheels to the chassis. Note 'Paint From Inside' instructions for parts 96e and 97c.

Step 11: Cabin Interior Assembly

Assemble the cabin interior. Attach parts 100a, 101a, 102a, 103a, 104a, 110d, 111b, 112b, 113b, 114d, 115b, 116d, 118b, 120b, 121b, 122b, 123b, 124b, 125b, 126b, 127b, 128b, 129d, 130d, 131d, 132b. Note 'Both Sides' instructions for several parts.

Step 12: Cabin Roof Interior

Assemble the cabin roof interior components, parts 132c, 133c, 134c, 135c, 136c, 137c, 139c, 141a.

Step 13: Cabin Exterior Panels

Attach exterior cabin panels and windows. Connect parts 145c, 146c, 147e, 148d, 149d, 150c, 151c, 151e, 152c, 153c, 153b, 154b, 156e, 158b.

Step 14: Cabin Assembly

Complete the cabin assembly. Attach the assembled cabin to the chassis. Parts include 172e, 177b, 183c, 184c.

Step 15: Front End Assembly

Assemble the front end of the truck, including the bumper, grille, and headlights. Parts include 160c, 161c, 162c, 163e, 164e, 165e, 166b, 167c, 171b, 173b. Decals 16 and 17 are applied here.

Step 16: Accessories Assembly

Assemble and attach accessories such as the roof rack and side skirts. Parts 26h, 27h, 141a, 175e are used. Note 'Paint From Inside' for parts 164e and 165e.

Decal Application Instructions

To apply decals: Cut out the required decals. Dip them in clean water for approximately 20 seconds. Position the decals on the model and slide them off the paper. For better adhesion, press them with a clean cloth to remove air bubbles.

Paint Schemes

The kit offers three livery options:

• Version A: Royal Black Livery - Features a black base with red chassis and accents. Includes specific decals for 'F12', 'Turbo 6', 'HBP 622', and 'VOLVO'.
• Version B: Volvo White Striped Livery - Features a red base with white stripes and red chassis. Includes specific decals for 'F12', 'VOLVO', and 'TIR'.
• Version C: German Green - Orange Livery - Features a dark green base with orange and white stripes, and a red chassis. Includes specific decals for 'F12', 'VOLVO', and 'HD LT 819'.

Refer to the diagrams for precise placement of decals and paint colors.

Contact Information

For customer service or information on defective parts, contact Italeri at www.italeri.com.

Italeri S.p.A.
Via Pradazzo, 6/B
40012 - Calderara di Reno (BO) ITALY
Fax: 0039 51 726 459
Email: italeri@italeri.com