Bike Cycling Lights & Gears for Night Riding | Magicshine – Magicshine Lighting
User Manual for MAGICSHINE models including: MONTEER 8000S V2.0 Remote MTB Light, 8000S V2.0 Remote MTB Light, V2.0 Remote MTB Light, Remote MTB Light, MTB Light, Light
*The M-REMOTE can only be paired with one device. To pair a new device, please repeat the operation steps above. Disconnect the lighthead from the battery
USER MANUAL – Magicshine Store
File Info : application/pdf, 2 Pages, 3.63MB
DocumentDocumentBATTERY FEATURES High capacity battery pack with 4*21700 Li-ion battery cells 7.2V 10 Ah. Multiple circuit protections for safety use. High quality fireproof PC material for shell. Type-C charging & discharging integrated interface for 10w/18w fast output. BATTERY INDICATOR When the light is off, press the power button to display the remaining power. MONTEER 8000S V2.0 USER MANUAL ACCESSORY/STRUCTURE MONTEER 8000S V2.0 M-REMOTE Battery pack Handlebar mount 1 USB-C Cable Nylon strap HOW TO INSTALL 2 3mm Hex 3 4 FLASH RED 0%-10% RED 11%-30% GREEN 31%-100% HOW TO RECHARGE 30% 70% USB-C 100% Standard charging time Approx.9.5hrs (5V 2A) Charging Fully charged SWITCHING THE LIGHTING MODE Long press power button to turn on/off When you turn the light on, it lights up in the last lighting mode you used. (Mode memory function) Long press to turn on Long press to turn off Click Click Click Click Click Click Double click Battery Indicator Click Click Click Click Click Double click Click Click Click Click Click HOW TO INSTALL BATTERY PACK 1 2 Input/Output 3 4 5 LUMENS/RUN TIME MODE BRIGHTNESS ECO 400 LOW 900 MID 1700 HIGH FLASH 3200 0-900 32 00 15 00 09 00 04 00 16 00 600 1400 2600 4800 0-1400 22 00 11 00 05 30 02 10 11 30 1000 2400 4400 8000 0-2400 12 00 06 30 03 25 01 30 07 00 Double click HOW TO PAIR 1 Disconnect the lighthead from the battery 2 Press the two buttons at the same time until the indicator light flashes 3 Reconnect the lighthead to the battery 4 OR Pairing is successful: the lighthead flashes once or the indicator light stops flashing *The M-REMOTE can only be paired with one device. To pair a new device, please repeat the operation steps above. HOW TO USE THE M-REMOTE Mode selection button -Press and hold to turn on/off -Press to active max.output -Double press to change the mode -Press and hold to turn on/off -Press to change the brightness -Double press to active flash mode Brightness selection button OPTIONAL PARTS WARNING EN WARRANTY The Magicshine lighting system is warrantied for 24 months from the date of purchase. If you register the lighting system on the Magicshine website you will receive a bonus 6 month warranty. Battery packs and AC adapters have a 6 month warranty, however, there is no bonus warranty available. The warranty is limited to defects in material and workmanship on the lighting system itself, the battery pack and the AC adapter. The warranty is only valid if the affected parts have not been tampered with and there is no intentional damage. Please keep your proof of purchase in a safe place. Proof of purchase must be presented in the event of any claim. Please contact the specialist retailer from whom you purchased the device for complaint or warranty claim. Alternatively, you can send your complaint or claim directly to Magicshine at Tel: (+86) 755-295 536 69 Fax: (+86)755-275 897 77 E-mail: support@magicshine.com (order from Magicshine.com online store) service@magicshine.com (order from other sales channels) In the event of a justified warranty claim and delivery of a replacement device, you will only be entitled to a model available when replacing. The manufacturer retains the right to make technical modifications. ANSI FL 1 STANDARD LIGHT OUTPUT 8000 BEAM DISTANCE 315m PEAK BEAM INTENSITY 25000cd IMPACT RESISTANCE 1m WATER RESISTANT Helmet mount TTA front mount *Adaptable accessories (sold separately)