Fiamma F80s Kit Side Installation Guide

Product Overview and Package Contents

This document provides installation and usage instructions for the Fiamma F80s Kit Side. Before starting, please check the package contents against the list below:

• Part A (x1)
• Part B (x1)
• Part C (x1)
• Part D (x1)
• Part E (x1)

Diagram on page 2 shows the individual components labeled A through E.

Important Initial Check:

Please ensure that all parts are present and have not been damaged or deformed during transport. If you have any doubts or questions regarding the installation, use, or limitations of the product, please contact your dealer.

Installation Instructions

Step 1: Mounting Bracket Attachment

Attach Part A to the vehicle's chassis or awning rail. Refer to the diagram for correct positioning and attachment points.

Diagram on page 4 shows Part A being attached to the vehicle's awning rail.

Step 2: Securing Mechanisms

Push the mechanism shown in the diagram to engage it. Repeat for the second mechanism.

Diagram on page 4 shows two mechanisms being pushed into place.

Step 3: Inserting and Securing Part B

Insert Part B into the designated slot as indicated by the arrow. Secure Part B.

Diagram on page 5 shows Part B being inserted and then secured.

Step 4: Using Part C

Use Part C (a screw) to further secure Part B. Tighten the screw. Pay attention to the alignment indicated for left and right side installations.

Diagram on page 5 shows Part B and Part C being used together, with a warning symbol ⚠️ indicating caution. Separate diagrams illustrate correct alignment for LEFT and RIGHT installations.

Step 5: Attaching Part D

Attach Part D to the awning rail. Arrows indicate insertion and sliding into position.

Diagram on page 6 shows Part D being attached to the awning rail.

Step 6: Locking Mechanism

Rotate the mechanism as shown by the curved arrows to lock it securely. A warning symbol ⚠️ indicates caution.

Diagram on page 6 shows a mechanism being rotated to lock, with a warning symbol ⚠️.

Step 7: Final Bracket Assembly

View the LEFT and RIGHT diagrams to confirm the correct assembly of the brackets on the awning rail.

Diagrams on page 7 show the LEFT and RIGHT final bracket assemblies.

Step 8: Rafter Pole Preparation

Prepare the rafter pole. Extend and retract it as shown, ensuring the spring and locking mechanisms are functioning correctly.

Diagram on page 7 shows a person extending and retracting a telescopic rafter pole.

Step 9: Connecting the Rafter

Connect the prepared rafter pole to the mechanism on the vehicle's awning rail.

Diagram on page 7 shows the rafter pole being inserted into the vehicle's awning rail mechanism.

Step 10: Awning Structure

Confirm the LEFT and RIGHT views of the awning structure's connection points.

Diagrams on page 8 show LEFT and RIGHT views of the awning structure.

Step 11: Securing the Rafter

Insert the rafter into the mechanism and secure it by pushing and locking as indicated.

Diagram on page 8 shows the rafter being inserted and secured into the mechanism.

Step 12: Final Assembly Check

Review the LEFT and RIGHT diagrams to ensure the final assembly of the awning support is correct.

Diagrams on page 8 show the LEFT and RIGHT final assembly of the awning support.

Warranty Information

In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

For detailed warranty terms in other languages, please refer to page 9 of the original document.

Manufacturer Information

Manufacturer: Fiamma S.p.A.

Address: Via San Rocco, 56, 21010 Cardano al Campo (VA), Italy

Website: fiamma.com

All rights reserved. Fiamma S.p.A. reserves the right to modify at any time, without notice, prices, materials, specifications and models or to cease production of any model.