Instructions for i-Phone models including: 1080P Wireless HDMI Dongle, 1080P, Wireless HDMI Dongle, HDMI Dongle, Dongle
Wireless HDMI Dongle, 4K Wireless HDMI Adapter, WiFi HDMI Dongle, Video Mirror Screen Dongle from i-Phone, i-Pad, Android, PC, Tablet, Windows to HDTV/Monitor/Projector, Mira-cast, Airplay, DLNA: Electronics & Photo
Thankyouforpurchasingfromourstore. PleasecontactourEmailifyouhaveany question about this item: support@drymokini.com
File Info : application/pdf, 7 Pages, 497.48KB
DocumentDocumentThank you for purchasing from our store. Please contact our Email if you have any question about this item: support@drymokini.com This code is connection ways we make, Don't worry, please! You can clearly to use our wireless HDMI dongle via this install video:) How to Get Great Result with Your New Wireless HDMI Dongle? How to install this Wireless HDMI Dongle? The installation is related to the device you use. 1. Plug all the cables accordingly into the device (Please don't forget to connect the USB cable to a 5V/1A charger for power supply.) 2. You would see a blue screen on TV. For Apple Devices 3. Connect your iPhone / iPad to the MiraScreen's WiFi. (Please check the WiFi name and password on the blue screen.) Swipe down/up on your iPhone and tap on "AirPlay Mirroring", select "MiraScreen" as target, then done. NOTE: the Internet is your iPhone's Cellular Data if you want to us wifi, please check the following steps:) For Android Devices 3. Find the "Cast" function on your phone / tablet. 4. Select "Enable wireless display", tap on "MiraScreen" as target, then done. For Windows Devices 3. Find the "Project" function in the lower right window of your laptop / PC. Here is the example of Windows 10 system. 4. Choose the mode you like. "Duplicate" for mirror mode, or "Extend" for extend mode. Note For Apple devices: After the above steps, you have successfully connected this dongle with your iPhone / iPad, and the phone screen could be cast on TV. BUT the Internet is your iPhone's Cellular Data. If you want to use your home's WiFi to watch videos via this dongle, please continue to finish the following steps: 1. Use your iPhone/iPad browser to access the IP address shown on the below of the blue screen (http://192.168.203.1) 2. Click "Internet"---Choose your home's router---Enter password 3. Open the WLAN setting of your iPhone/ iPad, and connect your device to your home's Wi-Fi. 4. Tap on AirPlay Mirroring, select MiraScreen as target, then done. Note: After setting at the first time, you don't have to connect it every time, just plug and play. You can also find the operation videos on YouTube: 1. For Android: https://youtu.be/9K3Udl2Au kc 2. For IOS: https://youtu.be/NU4tekcT 06k 3. For Window: https://youtu.be/BOnAHQuyv us FAQ about Wireless HDMI Dongle: Q: Why my laptop/PC can't find a connection with this dongle? A: Please check if your device has the Bluetooth and Wi-Fi function. If no, then it would need a Wi-Fi receiver to set up the connection. Q: Why there is only sound or image when watching Netflix, Amazon Video, Disney+, Sky go or other similar apps? A: If you are using Apple devices, please note that because of "HDCP" video copyright protection, for Apple devices, this product is not compatible with those subscription-based apps that needs paying for watching. If you are using Android or Windows devices, but you could not watch those apps mentioned above, please try the following method. 1. Download "Google Home" app. 2. After connecting the product well, turn on your phone and search the WiFi name: MiraScreen XXX, then enter Password: 12345678 (Please check the WiFi name and password on the blue screen.) 3.Open browser and search this website: 192.168.203.1 (You could find the website on the bottom of the blue screen.) 4. Click "Internet"---Find your home's WiFi name---Enter password. 5. Open the WLAN setting of your phone, and connect to your home's WiFi. 6. Open "Google Home" app, and select "MiraScreen XXX" as target. Then you could successfully see you phone showing on the TV screen:) Q: Do I have to reconnect the Wi-Fi display dongle every time or will it automatically reconnect? A: The Wireless HDMI Dongle will automatically reconnect after the connection is finished at the first time. Q: Why does my screen go black? A: Please check whether you have plugged the USB cable into the USB charger for power supply. Please don't plug the USB cable into the TV's USB Port, because this might cause insufficient power supply. Please connect the USB cable to a 5V/1A USB charger. Q: Why are the connections frequently interrupted Why I could not use this dongle to watch any video apps, including YouYube? A: Please try the following method. 1. Connect this item well 2. Use your phone's browser to search the address http://192.168.203.1shows on the blue screen 3. Click "Compatibility Mode"-----Turn it "ON" If there is no option of "Compatibility Mode", please upgrade it. The upgrade steps are as below. 1. Use your phone's browser to search the address http://192.168.203.1shows on the blue screen 2. Click "Upgrade"-----You will see a pop-up window, then choose to upgrade it. (sometimes the pop-up window would appear automatically, just choose to upgrade it) 3. Please wait for the downloading. 4. After the upgrade, the item would restart. Then please connect it again. 5. After connecting the item well, use your phone's browser to search the address http://192.168.203.1 6. Click "Compatibility Mode"-----Turn it "ON" Contact with Us If you have any questions about our products, please feel free to contact us via the email: support@drymokini.com