Introduction
This user manual provides comprehensive instructions for the PowMr POW-SunSmart SP5K Hybrid Solar Charge Inverter. It covers essential safety precautions, detailed installation procedures, system introduction, features, and operating modes. The POW-SunSmart series is designed for efficient solar energy storage and AC sine wave output, offering high response speed and reliability.
Key Features
- Supports inverter and mains power hybrid output, with optional use without a battery.
- Offers two output modes: mains bypass and inverter output for uninterrupted power supply.
- Features four charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid charging.
- Utilizes advanced MPPT technology with an efficiency of 99.9%.
- Equipped with a LCD screen and 3 LED indicators for system data and status display.
- Includes time slot control for prioritizing mains and battery usage based on tariffs.
- Provides power saving mode to reduce no-load loss.
- Features intelligent variable speed fan for efficient heat dissipation.
- Supports lithium battery activation by PV solar or mains, and accommodates lead-acid and lithium batteries.
- Offers 360° all-around protection, including short circuit, over/under voltage, overload, and reverse protection.
System Overview
The POW-SunSmart series integrates solar energy storage with AC sine wave output. A typical system includes a PV module, mains or generator connection, battery, household loads, and the all-in-one solar charge inverter itself. The inverter acts as the energy conversion unit, managing power flow between these components.
Further Information
For more details, including wiring specifications, circuit breaker selection, and parallel installation guides, please refer to the full user manual. You can find additional resources and the latest version of the manual on the PowMr official website.
