Honiture S14 Cordless Vacuum Cleaner User Manual
1. IMPORTANT SAFETY WARNING
ATTENTION: Before using this machine, please read all instructions in the manual and cautionary markings on the machine carefully.
1.1 Precautions When Using
- This Honiture machine is not intended for use by persons (including children) with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety.
- Use only as described in this Honiture Operating Manual. If the machine is not working as it should, if it has received a sharp blow, if it has been dropped, damaged, left outdoors, or dropped into water, do not use and contact the Honiture Support Team.
- Suitable for dry locations ONLY. Do not install, charge or use this machine outdoors, in a bathroom or within 10 feet (3 meters) of a pool. Do not use on wet surfaces and do not expose to moisture, rain or snow.
- When using this machine, please keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Do not point the hose, aluminium alloy tube or other accessories at your eyes or ears or put them in your mouth.
- Do not use to pick up hard objects, such as glass slag, needles, nails, etc.
- Do not touch the charger with wet hands to avoid electric shock. ⚠️
- Use only Honiture recommended accessories and replacement parts.
- Do not use without the dust cup and filter(s) in place.
- When removing or replacing a motorized brush bar, be careful not to pull the power button until the cleaner head has been reassembled.
- Do not water or spill liquid onto the vacuum cleaner. If that happens, it will increase the risk of electric shock.
- Use extra care when cleaning on stairs.
- Please do not use the vacuum cleaner to suck the detergent, kerosene, soot, wet dust, water, sewage, matches and other items.
- Please do not use a vacuum cleaner to suck up small particles such as cement, gypsum powder, wall powder, or large objects such as toy paper balls, otherwise it will cause the vacuum cleaner to block and the motor to burn out.
1.2 Notes on the Battery Pack
- Do not throw the battery pack away, and it should be safely disposed of in accordance with local regulations.
- Do not use a battery pack or machine that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not incinerate batteries or expose to high temperatures, as they may explode.
- The battery is a sealed unit and under normal circumstances poses no safety concerns. In the unlikely event that liquid leaks from the battery, do not touch the liquid as it may cause irritation or burns, and observe the following precautions:
- Skin contact – can cause irritation. Wash with soap and water.
- Inhalation – can cause respiratory irritation. Expose to fresh air and seek medical advice.
- Eye contact – can cause irritation. Immediately flush eyes thoroughly with water for at least 15 minutes. Seek medical attention.
- Disposal – wear gloves to handle the battery and dispose of immediately, following local ordinances or regulations.
- When the battery pack is not in use, keep it away from paper clips, coins, keys, nails, screws or other small metal objects that could make a connection from one terminal to another.
1.3 Notes on Charging
- Before use, check the charger cord for signs of damage or ageing. A damaged or entangled charger cord increases the risk of fire and electric shock.
- Never modify the charger in any way.
- The charger has been designed for a specific voltage. Always check that the mains voltage is the same as that stated on the rating plate.
- Unplug the charger when not in use for extended periods.
- When your vacuum cleaner is fully charged, needs to be cleaned or repaired, please unplug the charger in time and do not pull the power cord directly.
- Do not pull the cord to disconnect from a socket; grasp the plug and pull to disconnect.
- Don't wrap the cord around the charger when storing.
- Please fully recharge the battery when first used or used after long-time storage. If the product is not used for a long time, please make sure the battery is recharged and used each three months at least.
- If smoke or fire occurs during charging, unplug the charger immediately, and use a fire extinguisher to put out the fire. Do not use water to extinguish the fire, as it will increase the risk of electric shock. ⚠️
- Follow all charging instructions and do not charge the battery pack or the machine outside of the temperature range specified in the instructions. Charging improperly or at a temperature outside of the specified range may damage the battery and increase the risk of fire. To ensure maximum battery life, Honiture recommends the following:
- When not in use, the machine should be stored at room temperature. Recommended range: 64° F (18° C) to 82° F (28° C).
- The ambient temperature range for operation and charging should be 50° F (8° C) to 86° F (35° C).
1.4 Storage and Maintenance Precautions
- Please store the product in a cool and dry environment. Please avoid long-time sunshine on the product.
- The charger must be removed from the socket before removing the battery, cleaning, or maintaining the appliance.
- Please use a dry cloth to clean the vacuum cleaner. Please do not use gas or liquid that can make the surface cracked or color faded.
- Do not apply any fragrance or scented product to the filter(s) of this machine. The chemicals in such products are known to be flammable and can cause the machine to catch fire.
- Do not carry out any maintenance other than that shown in this manual, or advised by the Honiture Support Team.
- Do not disassemble the machine, as incorrect reassembly may result in an electric shock or fire. Contact the Honiture Support Team when a service or repair is required.
SAVE THESE INSTRUCTIONS
- [No open flames]
- [No heat sources]
- [No water or liquids]
- [No burning objects]
- [No hands near brush bar when in use]
- [No placement on or near cooker]
2. PACKAGE CONTENT
Please check and confirm the accessories and parts according to the following sheet before using.
Part Name | Quantity |
---|---|
Main Body | 1 |
Adjustable Extension Tube | 1 |
Motorized Brush Head | 1 |
2 in 1 Roller Brush | 1 |
Long Crevice Nozzle | 1 |
2 in 1 Upholstery Brush | 1 |
Hair Cleaning Tool | 1 |
Filter Replacement | 1 |
Aromatherapy Tablet | 1 |
Wall Mount Plate | 1 |
Charger | 1 |
Battery Pack | 1 |
User Manual | 1 |
3. OVERVIEW & ACCESSORIES
3.1 Overview
The main body of the vacuum cleaner includes the following components:
- 1. Animated Display
- 2. Fragrance Purification
- 3. Dust Tank Release Button
- 4. Dust Cup
- 5. Dust Release Button
- 6. Main Body Removal Button
- 7. Adjustable Extension Tube
- 8. Tube Telescopic Button
The accessories and main unit include:
- 9. Motorized Brush Head Release Button
- 10. Motorized Brush Head
- 11. LED Light
- 12. 2 in 1 Roller Brush
- 13. Speed Control Button
- 14. Switch Button
- 15. Battery Pack Release Button
3.2 OLED Color Screen Real-time Animation Display
Charging Reminder
Check the charging status by the digital screen, which displays the progress in percentage, indicating how much power is left. The battery is fully charged when it goes to 100%.
- Green Percentage: This product runs in Eco mode.
- Mint Blue Percentage: This product runs in Mid mode.
- Deep Blue Percentage: This product runs in Max mode.
Low Power Off Prompt
When the red lightning indicator ⚡ appears on the screen, the product must be charged as soon as possible, indicating that the power is below 10% and will be turned off after 10 seconds.
Error Reporting - Floor Brush Blocking
When foreign objects or too much hair get stuck in the brush roller, the screen displays an error report. ⚠️
Solution:
- Clean the Brush Roller.
- Avoid picking up large rubbish, such as pebbles.
- Empty the Dust Cup; contact Honiture Support for replacement.
- Contact Honiture Support for replacement.
Error Reporting - Airway Blockage
When the airway from the aluminum tube to the filter is blocked for 5 seconds, the machine stops running, and the screen displays an error report for 1 minute 30 seconds (error reporting animation cycles 3 times) and then goes out, or turns off and restarts to go out. ⚠️
Solution:
- Empty the Dust Cup.
- Align the dust baffle to the correct hole.
- Clean or change the Filter and reinstall correctly.
- Dry out Filter Sponge or HEPA Filter.
- Clean the Extension Tube and Motorized Brush Head.
Error Reporting - When using the Wrong Adapter
Input voltage/current mismatch: the screen plays an error message animation for 60 seconds and then goes out, or goes out when the adapter is unplugged. ⚠️ [Wrong Adapter]
3.3 Accessories
- 1. 2 in 1 Retractable Brush: Brush retractable design helps remove dust and hair from both upholstered furniture and hard surface furniture.
- 2. Long Crevice Nozzle: Removes dust in hard-to-reach areas like windows, bed feet, gaps between tables and chairs, etc.
- 3. Hair Cleaning Tool: Removes hair, rubbish, and micro dust on the brush shaft to keep the brush head clean.
- 4. Wall Mount Plate: Holds the vacuum on the wall-mount plate for easy storage and battery charging.
- 5. 2 in 1 Roller Brush: Removes dust, debris, and hair from hard floors, carpets, and velvet.
4. ASSEMBLING & WALL MOUNTING
4.1 Product Assembling
4.1.1 Install the Battery Pack
Description: Slide the battery pack into its designated slot until it clicks into place.
4.1.2 Install the Extension Tube
Description: Connect the extension tube to the main body and the cleaning head, ensuring a secure click.
4.1.3 Install Desired Cleaning Accessory
Description: Attach the chosen cleaning accessory (e.g., brush head, nozzle) to the extension tube or main body until it clicks.
4.2 Wall-Mount Plate
The vacuum cleaner cannot stand on its own. Fix the wall-mount plate to the wall securely with the screws provided by Honiture.
⚠️ WARNING:
- Please make sure there are no gas, water, or electrical cables and wires behind the mounting area.
- To avoid the dock dropping down, please make sure it must be installed firmly.
5. HOW TO USE
? WARNING: Ensure the battery is fully charged and fixed in place. Ensure the dust cup and filters are cleaned, dried, and fixed in place.
5.1 Start to Work
Press the switch button to start the appliance. Press the speed control button to adjust the power as needed.
5.2 Select Cleaning Mode
- Boot into "Eco" Mode.
- Press the "⚙️" Button to set to "Mid" Mode.
- Press the "⚙️" Button again to switch to "Max" Mode.
Attention: The product has a memory function; upon boot-up, it will show the most recent mode.
Eco Mode: Displays 100% charge indicator.
Mid Mode: Displays 90% charge indicator.
Max Mode: Displays 80% charge indicator.
6. CHARGING METHODS
6.1 Charging Methods
- 1. Remove the Battery Pack and Charge it Separately: Detach the battery pack and connect it to the charger.
- 2. Connect the Main Body to Charge: Connect the main body of the vacuum cleaner to the charger.
- 3. Hang on the Wall Mount to Charge: Place the vacuum cleaner on the wall mount, which is connected to the charger.
6.2 Battery Indicator
6.2.1 Charging Indicator
The battery indicator will be blinking in blue when charging and turn solid blue when the battery is fully charged.
- Blue light blinking (Charging)
- Blue light (Fully Charged)
The number displayed represents the remaining power.
When the battery is charging, the battery charging animation on the display will change color according to the battery power, and the power indicator light will continue to flash. After the battery is fully charged, the battery charging animation will show 100%. The display will automatically turn off after 1 hour, and the power indicator light will stop flashing and remain blue.
6.2.2 Low Battery Level Indicator
When the battery power is lower than 30%, the display will show a low power shutdown prompt. At this time, the vacuum cleaner should be charged as soon as possible to avoid it shutting down within a few minutes when used next time.
6.3 Abnormal Indicator
- When the ground brush is blocked, the display starts an animation to remind you to check the ground brush. ⚠️ [Check the Brush]
- When the host unit is blocked, the display will start an animation to remind you of the airway blockage and show you how to clean the vacuum cleaner. ⚠️ [Airway Blockage]
- When using an adapter not provided by Honiture, the screen plays an error message animation for 60 seconds and then goes out, or goes out when the adapter is unplugged. ⚠️ [Wrong Adapter]
7. MAINTENANCE
Please clean it regularly to prolong the service life of the vacuum cleaner.
7.1 Main Body Cleaning
- Turn off the power before cleaning the body.
- Please use a neutral detergent and wipe the body with a half-wet cloth.
- Please avoid sun exposure and store in a cool and dry place.
7.2 Dust Cup Cleaning
7.2.1 Empty the Dust Cup
- Press the dust cup release button to empty the dust.
- When using, if the garbage in the dust cup exceeds the MAX Line, please empty it in time. [MAX Line Indicator]
7.2.2 Clean the Dust Cup
Press the dust cup release button to remove the dust cup, then take out the sponge, HEPA filter, and the stainless steel filter in turn.
7.3 Filter Cleaning
Note: Wash the filters with cold water at least once every month.
- Filter sponge and HEPA filter can be rinsed with water to remove dust.
- Please ensure the filters are completely dry before reassembly.
Visual guide for filter cleaning:
- [Rinse filter with cold water]
- [Do not use hot water]
- [Do not use bleach]
- [Do not use washing machine]
- [Dry for 24 hours]
- [No detergent]
7.4 Brush Roller Cleaning
Note: After long periods of use, the bristles may be jammed by hair or similar build-up. It is recommended to clean the brush roller periodically to ensure efficient operation and maintain suction.
- Remove the brush roller, gently clean the motorized brush window and suction mouth.
- Remove the debris wrapped around the roller with the Honiture Hair Cleaning Tool, then flush with water.
- Insert the brush roller into the motorized brush window, push down the cover until it securely locks in place. (Please make sure the brush roller is completely dry before using.)
7.5 Aromatherapy tablet replacement
Open the air vent lid, remove the old aromatherapy tablet, and attach the new one. Snap the lid back on.
Tip: Once the fragrance has disappeared, add a drop of your favourite essential oil to the aromatherapy tablet.
8. SPECIFICATION
Product | Cordless Vacuum Cleaner |
Model | S14 |
Rated Voltage | 25.9V |
Cleaning Modes | Eco/Standard/Boost |
9. TROUBLESHOOTING
ISSUE | CAUSE | SOLUTION |
---|---|---|
The vacuum cleaner can not work | (1) Out of power (2) Battery Pack not installed in place (3) The Motorized Brush Head is blocked with hair and other debris (4) Auto protection for overheating (5) Switch Button can not work |
(1) Charge the vacuum cleaner (2) Battery Pack installed in place (3) Clean the Motorized Brush Head (4) Restart after cooling down (5) Contact Honiture Support for replacement |
Weak suction | (1) Dust Cup is full of garbage (2) Dust baffle misaligned (3) Filter are clogged or not installed in place (4) Filter Sponge or HEPA Filter not dry (5) Extension Tube and Motorized Brush Head is blocked with hair or other debris (6) Low power |
(1) Empty the Dust Cup (2) Align the dust baffle to correct hole (3) Clean or change the Filter and reinstall correctly (4) Dry out Filter Sponge or HEPA Filter (5) Clean the Extension Tube and Motorized Brush Head (6) Charge the vacuum cleaner |
Charging indicator does not light up or flash abnormally | (1) Battery Pack is dead or broken (2) Charger is not correctly connected (3) Charger is wrong |
(1) Change the Battery Pack (2) Make sure the Charger is fully plugged in socket and Battery Pack (3) Use the Charger provided by Honiture |
Insufficient running time after charging | (1) Insufficient charging time (2) Battery aging (3) Motorized Brush Head or is blocked with hair or other debris (4) Charger is wrong |
(1) Vacuum cleaner fully charged (2) Change the Battery (3) Clean the Motorized Brush Head (4) Use the Charger provided by Honiture |
The Roller Brush stops rotating | (1) Brush Roller are blocked with hair, pebbles or other debris (2) Dust Cup is full of dust |
(1) Clean the Brush Roller (2) Avoid picking up large rubbish, such as pebbles (3) Empty the Dust Cup, Contact Honiture Support for replacement (4) Contact Honiture Support for replacement |
10. WARRANTY
The 2-Year Limited Warranty
- Your Honiture machine has a 2-year warranty against original defects in material and workmanship, when used for private household purposes in accordance with the Honiture Instruction Manual.
- This warranty provides, at no extra cost to you, all labor and parts necessary to ensure your machine is in proper operating condition during the warranty period.
WHAT IS COVERED?
According to the requirements outlined in this instruction manual, subject to the following conditions and exclusions:
- Only applies to purchases made from authorized retailers of Honiture.
- This warranty will only be valid if the machine is used in the country in which it was sold.
WHAT IS NOT COVERED?
Honiture shall not be liable for costs, damages, or repairs incurred as a result of:
- Machines purchased from an unauthorized dealer.
- Careless operation or handling, misuse, abuse, and/or lack of maintenance or use not in accordance with the Honiture Instruction Manual.
- The machines are used for commercial or rental purposes in addition to normal domestic use. Use of parts not in accordance with the Honiture Instruction Manual.
- Use of parts and accessories other than those produced or recommended by Honiture.
- External factors unrelated to product quality and use, like accidental water damage. Repairs or alterations carried out by unauthorized parties or agents.
- Normal wear and tear, including Dust Cup, Belt, Filter, HEPA, Brush Roller, and Power Cord (or where external damage or abuse is diagnosed), carpet or floor damage due to use not in accordance with manufacturer's instructions or failure to turn the brush roller off when necessary.
- Reduction in battery discharge time due to battery age or use.
HOW TO CLAIM?
Please keep your proof of purchase. To make a claim under our Limited Warranty, you need to provide your original purchase receipt with the purchase date and order number on it.
- All work will be carried out by Honiture or its authorized agency.
- Any replaced defective parts will become the property of Honiture.
- Service under this warranty will not extend the period of this warranty.
If your machine is not functioning properly, or you still have any questions after reading this manual carefully, please feel free to contact Honiture for assistance.
Contact Information
E-mail our Customer Service:
- The United States: support-US@honiture.com
- The United Kingdom: support-UK@honiture.com
- Canada: support-CA@honiture.com
- Australia: support-au@honiture.com
Honiture is here to help and we are glad to serve you.