User Manual for Yifeng models including: P21, P21 Magnetic Wireless Charger Power Bank, Magnetic Wireless Charger Power Bank, Wireless Charger Power Bank, Charger Power Bank, Power Bank
Shenzhen Yifeng Intelligent Technology Co., Ltd. P21 Magnetic wireless charging power bank 2AXY5-P21 2AXY5P21 p21
(P21 Portable Power Bank Magnetic Wireless Charger Power Bank Model: P21 User Manual Shenzhen Yifeng Intelligent Technology Co., Ltd. Specifications Magnetic wireless charging power bank Output phone:15W Max Input TYPE-C or C port:5V 3A 9V 2A 12V 1.5A C port:5V 3A 9V 2.22A 12V 1.65A Cable:5V 3A 9V 2.22A 12V 1.65A Mobile Power Product Indication 15W magnetic charging position USB-C Input/Output Wireless Charging indicator Light Charge Switch Battery level display Data Cable PD20W Output/Output Power bank indicator light 0%(Indicator light flashes) 0%-25% 25%-50% 50%-75% 75%-100% Compatible Devices For Mobile Phone iPhone 16 SeriesiPhone 15 SeriesiPhone 14 Series/ iPhone 13 SeriesiPhone 12 Series And applicable to other devices that support QI wireless charging for charging Please use a magnetic case to charge your phone C output Samsung Galaxy Z Fold5/ Z Flip5/23 Ultra/ S23+/ S23/S22 Ultra/ S22+/S22/ S21 FE/ S21 Ultra/ S21/ S21+/ S20 FE/ S20/ S20+/ S20 Ultra/ S10E/ S10/ S10+/ S9/ S9+/ S8/ S8+/ S7 series / S6 series/ Z Flip4/ Z Flip3/ Z Flip/ Z Fold4/ Z Fold3/ Z Fold2/ Note 20 Ultra/ Note 20/ Note10+ (5G)/ Note10 (5G)/9/8/7/6/5 and all devices that support C port charging AirPods Pro 2nd Generation/AirPods 4/AirPods 3/ AirPods Pro MagSafe/AirPods Pro/AirPods 2nd Generation Please Note: 1. Only use certified PD Charging Wall Adapter to charge the device, do not plug into computer USB port or any other non-certified USB port. 2. Place your Qi-enabled device accurately in the wireless charging area when charging. 3. a PD adapter is required when charging mobile phones can be quickly charged 4. Make sure to disconnect the device from power when cleaning. 5. lt is normal and safe to hear a humming noise when very close to the charger. lt means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed. 6. If your device can not be fully charged, this may due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging. Important Safety Instructions Disposalofabatteryintofireorahotoven, ormechanicallycrushingorcuttingofabattery,thatcanresultinan explosion. Leavingabatteryinanextremelyhightemperaturesurroundingenvironme ntthatcanresultinanexplosionor theleakageofflammableliquidorgas Thebatterysubjectedtoextremelylowairpressurethatmayresultinanexpl osionortheleakageofflammable liquidorgas. Replacementofabatterywithanincorrecttypethatcanresultinanexplosion ortheleakageofflammable liquidorgas. Batterycannotbesubjectedtoextremelyhighorlowtemperatures, lowairpressureathighaltitudeduringuse,storageortransportation. The operating temperature range of the mobile power is between 0¥ and 40¥, please do not use it beyond this temperature range. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Manufacturer Shenzhen Yifeng Intelligent Technology Co., Ltd. Address 2nd Foor, Building #4, Area A, Hua Feng First Technology Pa rk,Hang Cheng Street, Bao An District, Shenzhen, Guangdong, China Made in China A01 2024.12.3 128 60*85*mm (RoHSAdobe PDF library 16.00 Adobe Illustrator(R) 24.0