ProClip Key Lock Module User Guide

Compatibility

Compatible with Part Numbers: 7xx266, 7xx267, 7xx268, 7xx285

Important Information for Installation

Important: Self-installation instructions and advice are provided for your convenience. It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation. ProClip USA, LLC. shall have no liability for damage or injury resulting from the installation or use of any ProClip or third party products. It is your responsibility to ensure that all products are installed in adherence with local laws and regulations and in such a manner as to allow a vehicle to be operated safely and without distraction. ProClip USA, LLC. product warranties do not cover the installation, removal or re-installation of any product.

Attention: Carefully read all instructions and review the images before installing this product.

Installation Instructions

1. Step 1: Align the Brass Inserts

   This Lock block features 4 brass inserts designed to align with the existing counter-sunk holes in the cradle's backplate.

   [Image Description: A lock block with four visible brass inserts is shown, ready to be aligned with corresponding holes on a cradle backplate.]

2. Step 2: Mount the Lock Block

   Using the included fasteners, position the spring lock block onto the back of the cradle. Utilize the provided Allen wrench and fasteners to securely attach the block.

   [Image Description: Hands are shown using an Allen wrench to fasten the lock block onto the back of a device cradle.]

3. Step 3: Using the Key Lock

   After the tablet is docked, the key lock can be slid down over the top of the tablet. Press the center pin inward to secure the block in place. To unlock, insert one of the included keys and turn it until the center pin extends outwards. This feature offers enhanced protection against vibration, particularly in rugged environments or when the tablet must remain securely in place during use.

   [Image Description: Two images show the key lock mechanism. The first shows the lock being slid into position over a docked tablet. The second shows the center pin being pressed to lock it.]

4. Step 4: Modular System

   This key lock block is one of several modular components available for this cradle, allowing for straightforward upgrades or repairs if the cradle becomes damaged. The system includes two identical keys for locking and unlocking the center pin.

   [Image Description: A ProClip cradle is shown with the key lock module attached, demonstrating the modular design.]

Returns Policy

All returns must be initiated within thirty (30) days of the delivery date and must include proof of purchase, a copy of the original order, or the invoice. Products cannot be returned without prior approval from ProClip USA. To initiate a return, the buyer must obtain an RMA (Return Merchandise Authorization) number. Items returned without a valid RMA number may be rejected. A restocking fee may apply to items that are opened, used, damaged, or returned without all original components.

Limited Warranty and Liabilities

ProClip warrants its Products to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. Should a Product become defective within this warranty period, ProClip will, at its discretion, replace, repair, or refund the purchase price. Replacement parts or Products will be provided on an exchange basis and will be either new or reconditioned. All replaced Products become the property of ProClip. Warranty service can be obtained by delivering the Product during the warranty period to the original place of purchase or to ProClip at 4915 Voges Rd., Madison, WI 53718 USA, along with proof of purchase, price, and date. If shipping to ProClip, the buyer must first contact ProClip at +1 800-296-3212 or email returns@proclipusa.com to secure a return authorization and number. The buyer is responsible for all shipping, packaging, and insurance costs, as well as any other costs (excluding labor and parts) necessary for repair, replacement, or refund under this warranty. For further details on obtaining warranty service, please write, email, or call ProClip at 4915 Voges Rd., Madison, WI 53718 USA. Tel: +1 800-296-3212, email: returns@proclipusa.com.

This limited warranty does not cover any product damaged due to accident, misuse, abuse, or unauthorized service. This warranty supersedes all other express warranties for this product. Implied warranties, including those of merchantability, fitness for a particular purpose, and non-infringement, are limited to a duration of one (1) year from the date of purchase. In the event a product becomes defective during the warranty period, the purchaser's sole remedy is repair, replacement, or refund as described above. ProClip shall not be liable for incidental or consequential damages, including but not limited to loss of property, arising from any breach of express or implied warranty. ProClip disclaims all warranties, express or implied, other than those explicitly stated herein. ProClip will not be liable to you or any third party for any incidental or consequential damages, including indirect, special, punitive, or exemplary damages, or attorney fees, arising from the use of or inability to use the products, or for any claim by any other party, even if ProClip has been advised of the possibility of such damages.

For regulatory information, visit: www.proclipusa.com/regulatory.html