User Manual for RENOGY models including: 614-02409-03, 614-02409-03 Pure Sine Wave Inverter With Transfer Switch, 614-02409-03, Pure Sine Wave Inverter With Transfer Switch, Wave Inverter With Transfer Switch, Transfer Switch, Switch
PUH 12V 3000W Pure Sine Wave Inverter with UPS Transfer Switch and Built-in Bluetooth
VERSION A2
How to Properly Install Cable Clamps?
The AC Output Port with cable clamps to ensure that the wiring connections remain secure and do not come loose due to vibrations. Step 1: Loosen the screws on a cable clamp with a Phillips Screwdriver. Step 2: Lift the clamp, and run the cables through the clamp. cYou will need 1 x 3 prong (10 AWG recommended Black, White, Green) ac cables not provided with this product. Measure the required length for your particular application. for ac output of the inverter.SJT0 and SJT,SJ0 are recommended wire Step 3: Secure the clamp by fastening the screws.
14.16in-lbs (1.6N-m)
14.16in-lbs (1.6N-m)
14.16in-lbs (1.6N-m)
Do not use the bare wires if there is any visible damage. Do not use SP-3, SPT-3 type wire The screw torque of a cable clamp is 14.16 in·lbs (1.6 N·m). Do not over tighten the screws to prevent damage
-- 23 --
Adobe PDF library 16.07 Adobe Illustrator(R) 24.0