Use and Care Guide
PV-119
PREMIUM HOME SOLUTION
This guide provides essential information for the proper use, care, and assembly of your PV-119 outdoor dining table.
Safety Information
- Do not completely tighten screws until all screws are started. Tighten each bolt firmly and properly.
- Some parts may contain sharp edges. Wear protective gloves as necessary.
- Children under the age of 16 should not be engaged in the assembly, removal or disassembly of the product.
- Children under the age of 10 should be supervised by a competent adult while using this furniture.
- Please keep children out of the assembly area during assembly.
- This set is heavy, and may require two adults for safe assembly.
- Never use this product as a support. Do not shake, lean, or climb on the product at any time.
? DANGER: Do not allow children to play with plastic wraps or small parts to prevent potential choking hazard.
⚠️ CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury!
Warranty
LIMITED WARRANTY
This warranty is a limited warranty, and applies to the original purchase. Proof of purchase is required. This is a residential warranty and does not apply to commercial use. This collection carries a (1) year limited warranty and is valid from the original date of purchase to the original owner.
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions with similar merchandise if the model in question is no longer in production.
For a copy of our full limited warranty, please contact our customer service team.
PACKAGE CONTENTS
[Note: Identify all parts packed in the carton against the parts list. Remove all protective material carefully and do not use a knife to prevent scratching the furniture.]
[Note: Hardware not shown to actual size.]
| Item | Part Letter | Quantity | Description |
|---|---|---|---|
| 1 | A | x28 (Extra: 2) | M6x20 mm |
| 2 | B | x4 (Extra: 2) | M6x40 mm |
| 3 | C | x2 (Extra: 2) | M6x70 mm |
| 4 | D | x36 (Extra: 2) | Ø6x14x1 mm |
| 5 | E | x4 (Extra: 2) | M6 mm |
| 6 | F | x2 | 4 mm |
| 7 | G | x2 | 90x25x2 mm |
| 8 | H | x24 (Extra: 2) | M4x15 mm |
Assembly Instructions
Step 1
Use a short hex head tool and insert it into the hole to pry it out.
Step 2
Connect frame components using parts labeled A and D. Follow the diagram indicating connections between parts 2, 3, and 4. A progress indicator shows 80% completion for this sub-assembly.
Step 3
Continue assembling the frame. Connect components using parts labeled A and D, referencing part number 5. A progress indicator shows 80% completion.
Step 4
Attach legs to the frame. Use four (x4) screws labeled D and A, connecting to part number 1. A progress indicator shows 80% completion.
Step 5
Assemble additional frame sections. Connect parts labeled C, D, E, F, and G, referencing components 7 and 6. A progress indicator shows 80% completion.
Step 6
Connect frame components using parts labeled A, D, and B, referencing part number 7. A progress indicator shows 80% completion.
Step 7
Continue connecting frame components using parts labeled A, D, and B, referencing part number 7. A progress indicator shows 80% completion.
Step 8
Complete the frame assembly. Connect components using parts labeled A, D, and B, referencing part number 7. A progress indicator shows 100% completion.
Step 9
Attach the legs and final frame structure. Use twenty-four (x24) screws labeled H. A progress indicator shows 100% completion.
Weight Limits: Maximum load for the table is 75 kg. Maximum load for chairs (if applicable, implied by context) is 10 kg.
Step 10
Attach the tabletop to the assembled base. Ensure all connections are secure.
Cleaning and Maintenance
- Clean the furniture with a damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid, or other solvents on the textile or metal parts.
- We recommend the use of furniture covers to protect the product when not in use.
- Inspect and tighten all screws on a regular basis to ensure proper performance and safety.
- In order to prolong the life and beauty of your product, we recommend storing it in a dry and protected area during off-season periods.
