Parkell Ultrasonic Inserts Buyer's Guide
Guidance for selecting the right ultrasonic insert for your dental practice.
Introduction
With numerous variables like tip style, power, grip, light-transmitting capabilities, and water flow, choosing the right ultrasonic insert can be daunting. This guide simplifies the decision-making process, helping you select the optimal tool for every dental procedure.
Need Assistance?
If you require further guidance, Parkell is available to assist. Contact us at 800-243-7446 for personalized support and answers to any questions.
Understanding Scaler Frequency: 25K or 30K
Magnetostrictive scalers operate at either 25K or 30K frequencies. Using an incompatible insert can lead to the scaler not operating or the insert not fitting the handpiece. Parkell's TurboSensor (D560-110) and Integra (D680-110) are compatible with both 25K and 30K inserts, while the TurboVue (D570-110) is designed exclusively for 30K.
Helpful Hint: Learn how to test if your insert needs replacement by visiting www.parkell.com/inserts-coffee-test.
Handpiece Sheaths for Infection Control
Enhance your practice's infection control by using removable and autoclavable handpiece sheaths. Parkell's TurboSensor, TurboVue, and Integra handpieces feature these sheaths. To determine the number of sheaths needed, divide your daily patient count by your autoclave cycles.
Helpful Hint: For offices that use one insert per patient, bag a sheath with each insert and sterilize them together.
Ultrasonic Insert Tip Styles
Visual representations of the following tip styles are available to aid selection.
| Style | Benefit | Specialty | Primary Use | Power | SKU # |
|---|---|---|---|---|---|
| Universal |
|
Basic supragingival scaling (limited use interproximally and subgingivally). | For moderate to heavy deposits. | Any | DUI30, DUI25, DLH30U, DSG30U |
| Straight Perio |
|
Rounded tip enables subgingival placement up to 3mm. | Light to moderate deposits. | Low - Medium | DPI30, DPI25, DLH30P, DSG30P |
| Burnett |
|
Higher vibration compared to all other inserts when using maximum power level. | Moderate to extra heavy supra and subgingival deposits. | Any | DTI30, DTI25, DSG30T, DLH30T |
| Triple Bend |
|
Primarily for Supragingival (limited subgingival use when tissue condition permits). | Moderate to heavy deposits and stains. | Any | DLH30TRI |
| Beaver Tail |
|
Supragingival use only. | Moderate to heavy deposits and stains. | Any | DBI30 |
| Curved Perio |
|
Supragingival use, with subgingival placement up to 3mm. | Light to moderate deposits. | Low - Medium | DPR30, DPL30 |
| Gentle Clean |
|
For removal of plaque and light calculus from both implants and teeth. | Plaque and light calculus. | Low - Medium | DSG30GC |
Grip Options
Classic Grip: Parkell's original metal grip, tapering from over 10mm to 6mm in diameter over its 31mm length.
Soft Grip (First Generation): Features a vinyl casing for extra cushioning. A gentle contour between 10-11mm diameter aids tactile awareness without visual confirmation.
Comfort Grip (Second Generation): Offers maximum comfort with a 12mm wide, tire-like tread pattern for a secure grasp, reducing hand fatigue during extended use.
Water Flow Systems
Standard: Water is delivered from the base of the tip (Diagram A).
Precision: Water is delivered close to the tip (Diagram B).
Advantages of Precision Water Flow:
- More effective lavage of the treatment site.
- Improved visibility.
- Potential for reduced aerosol depending on scaler settings.
Quality and Performance
Parkell inserts are crafted from the highest quality stainless steel, hand-assembled, inspected, tested, and finely-tuned for optimal scaler performance. They are designed to out-perform and outlast other inserts, offering long-term value over cheaper alternatives.
Category-Detail: Ultrasonic-Inserts
