User Guide for Danfoss models including: KE05501 Time Proportional Amplifier Module, KE05501, Time Proportional Amplifier Module, Proportional Amplifier Module, Amplifier Module, Module
DESCRIPTION The KE05 Time Proportional Amplifier Module provides automatic steering control on paving, curbing and planing machines. The KE05 receives a signal from an external potentiometer and outputs a control signal to a solenoid to position a screed, form or cutting drum. KE05 Time Proportional Amplifier Module BLN-95-9021-2 Issued: June 1995 TECHNICAL DATA ELECTRICAL OPERATING VOLTAGE 11 - 14 Vdc OUTPUT CURRENT 3.5 amps, maximum STANDBY CURRENT 100 mA, maximum VOLTAGE MIDPOINT Input null voltage shall be 4 Volts nominal when measured to the common on the PWB. FREQUENCY Within the proportional band the frequency of the output pulses is 3±1 Hz. ORDERING INFORMATION Order the KE05 per the information in Table A. TABLE A. INFORMATION NECESSARY TO ORDER THE KE05 AMPLIFIER. PART NUMBER KE05501 KE05502 KE05503 KE05504 KE05505 KE05506 MAXIMUM DEADBAND (Vdc) .35 .35 .47 (5) .25 (6) .16 .35 .35 PROPORTIONING BAND TERM 5 .25 .25 .37 TERM 6 .25 .25 .21 .10± 50% .25 .25 .10± 50% .25 .25 INPUT RATIO 1:1 Nonlinear 2:1 1:1 1:1 1:1 GAIN 1X 1X 1X 5X 1X 1X X TERM No No No Yes No No R35,21 100 Ohm 100 Ohm 100 Ohm 100 Ohm Jumpers 100 Ohm NOTE: All voltage measurements ±15% unless noted otherwise. Bracketed numbers for the KE05503 refer to terminals. On the KE05506, R1 is jumpered so that summing can be done externally. © Danfoss, 2013-09 BLN-95-9021-2 . 1 . CONNECTION DIAGRAM SB104A ROTARY POSITION SENSOR R7232A CONTROLLER KVF SERVOVALVE ACX104C POTENTIOMETER ROTARY POSITION SENSOR STEERING CYLINDER STEERING CYLINDER ACX104C POTENTIOMETER ROTARY POSITION SENSOR PR ALIGNMENT VALVE ALIGNMENT MODULE KE05501, KE05502, KE05503, KE05504 Bold lines represent hoses. TECHNICAL DATA +12 VDC FRONT STEERING SENSOR ACX104C1152 A BC AUTO LEFT STEER SOLENOID RIGHT STEER SOLENOID 1 2 3 4 5 6 7 KE05503 AMPLIFIER 8 MANUAL GROUND 1374A MANUAL STEERING SENSOR A BC FEEDBACK SENSOR ACX104C1152 A BC 1583 BLN-95-9021-2 2 CUSTOMER SERVICE NORTH AMERICA ORDER FROM Danfoss (US) Company Customer Service Department 3500 Annapolis Lane North Minneapolis, Minnesota 55447 Telephone: (763) 509-2084 Fax: (763) 559-0108 DEVICE REPAIR For devices in need of repair, include a description of the problem, a copy of the purchase order and your name, address and telephone number. RETURN TO Danfoss (US) Company Return Goods Department 3500 Annapolis Lane North Minneapolis, Minnesota 55447 EUROPE ORDER FROM Danfoss (Neumünster) GmbH & Co. Customer Service Department Krokamp 35 Postfach 2460 D-24531 Neumünster Germany Telephone: 49-4321-8710 Telex: (299) 708 Fax: 49-4321-871-284 BLN-95-9021-2 3Danfoss A/S GPL Ghostscript 9.55.0