PROGRAMMING CABLE GMKN4067
GENERAL INFORMATION
The GMKN4067 Programming Cable provides a 4-wire RS232 interface (including RxD, TxD, CTS, RTS) between a computer and a mobile radio for programming or flashing operations.
OPERATION
Programming procedures are detailed in the relevant radio's Basic Service Manual. Connect the radio to the computer as directed in that manual.
⚠️ Do not disconnect the cable during a procedure. This could lead to incorrect radio configuration and degraded performance.
SERVICE
The GMKN4067 Programming Cable is not repairable. Please order a replacement cable if necessary.
CABLE CONNECTIVITY
To Radio Accessory Connector (20 pins)
- EXTERNAL PTT: Pin 3
- FLASH: Pin 6
- GND: Pin 7
- GND: Pin 8
- SWB +: Pin 13
- CTS: Pin 17
- RTS: Pin 18
- TxD: Pin 19
- RxD: Pin 20
To Computer (9 pins female)
- DCD: Pin 1
- RxD: Pin 2
- TxD: Pin 3
- DTR: Pin 4
- GND: Pin 5
- DSR: Pin 6
- RTS: Pin 7
- CTS: Pin 8
- RI: Pin 9
The cable utilizes a Radio Interface Box (RIB) with an RS232 Level Shifter to facilitate communication between the radio and the computer.
CONNECTOR DETAIL
Computer Connection: Features a 9-pin female D-sub connector.
Radio Accessory Connection: Utilizes a 20-pin connector.
The Radio Interface Box (RIB) is an inline component connecting the computer and radio cables.