Owner's Manual for zigbee models including: CXR-21A-WZS, CXR-28A-WZS, CXR-21A-WZS 3.0 Constant Current LED Driver, 3.0 Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver
10-42VDC 1CH*(150-500mA) 1.5-21W Zigbee Constant Current LED Driver For Magnetic Lights CXR-21A(WZS) [CXR-21A(WZS)]
8 févr. 2023 — Special for magnetic & linear lamp. ○ No input polarity. ○ DC to DC constant current output, multiple output current settings. ○ Tuya APP cloud control, ...
Zigbee 3.0 Constant Current LED Driver Model No.: CXR-21A(WZS), CXR-28A(WZS) Features Special for magnetic & linear lamp No input polarity DC to DC constant current output, multiple output current settings Tuya APP cloud control, support brightness adjust, delay turn on/off, timer run, scene edit, sleep wake-up and biorhythms function Voicecontrol, support Alexa,Google, AmazonECHOandTmallGeniesmartspeaker Can relay and route to each other, up to 15 hops Match with Zigbee 3.0 remote or scene panel control optional Suitable for STUCCHI standard housings, magnetic installation Smooth dimming without flicker, quiet without noise Short circuit, overload, no-load and anti-reverse protection 5-year warranty Technical Parameters Model Output Output Voltage Output Current Output Power Current Accuracy Dimming Range Channel num Dimming Interface Input Environment Input Voltage Input Current Ef ciency(Typ) Standby Power Woking Temperature Storage Temperature Working Humidity Protection Overload Short Circuit Input Anti-Reverse Protection Other Size Weight CXR-21A(WZS) 10~42Vdc 150-500mA 1.5W- 21W ±5% 0~100% 1 Zigbee 3.0 48Vdc±5% ( No polarity) Max.0. 47A 93% <0.5W - 20~50°C -40~80°C 20~95%RH, non-condensing Hiccup,recovers automatically affer fault condition is removed. Hiccup,recovers automatically affer fault condition is removed. No input polarity L92×W13.5×H12.2mm 10g±2g For STUCCHI standard housing - 9519-166-K - B 9519-166-K/W No flicker, no noise CXR-28A(WZS) 350-700mA 3.5W-29.4W Max.0.65A 95% Installation guide LED Current Selection: Note: Please select the correct current through the DIP switch on the PCB board when the power is off. DIP Switch CXR-21A(WZS) Output Current Output Voltage Output Power 150mA 10-42V 1.5-6.3W 200mA 10-42V 2-8.4W 250mA 10-42V 2.5-10.5W 300mA 10-42V 3-12.6W 350mA 10-42V 3.5-14.7W 400mA 10-42V 4-16.8W 450mA 10-42V 4.5-18.9W DIP Switch CXR-28A(WZS) Output Current Output Voltage Output Power 350mA 10-42V 3.5-14.7W 400mA 10-42V 4-16.8W 450mA 10-42V 4.5-18.9W 500mA 10-42V 5-21W 550mA 10-42V 5.5-23.1W 600mA 10-42V 6-25.2W 650mA 10-42V 6.5-27.3W 3 500mA 10-42V 5-21W 700mA 10-42V 7-29.4W ON OFF ON OFF Mechanical Structures and Installations 92mm ON 12 3 13.5mm Zigbeemodule DC48V Zigbeemodule User Manual Ver 1.0.0 12.2mm 1 Wiring Diagram AC100-240V 48VDC Power Supply ON 12 3 Zigbeemodule DC48V Systemwiring 3G/4G/5G WiFi Tuya Cloud LED Light 15m 15m 15m Mobile Phone WiFirouter 15m Tuya Zigbee Gateway 15m DC48V DC48V ON 12 3 ON 12 3 Zigbeemodule Zigbeemodule LED Light LED Light Zigbeemodule ON 12 3 DC48V Amazon ECHO Zigbee Scene Panel Zigbee Remote DC48V ON 12 3 Zigbeemodule LED Light LED Light Smart Panel Note: (Gateway Free) 1.The above distance is measured in spacious (no obstacle) environment, Please refer to the actual test distance before installation. 2.PleasecheckiftheWiFi routernetin2.4Gband, the5Gband isnotavailable, and donothideyourrouternetwork. 3. PleasekeepthedistancebetweenLED driverandrouterclose, andchecktheWiFisignals. 4. Users must use the Tuya ZigBee gateway to realize remote control and voice control (The smart panel integrate Zigbee gateway function). App Operating Instructions 1. Network pairing Download the Tuya APP and register anaccount, search and add the Tuya Zigbee gateway device. Quickly press the "RESET" button five times or repeat power on and off five times to clear the previous network connection, enter pairing mode with the output light breathes blinking. Under the gateway, search and add new device. If the network connection is successful, you can find ZBS-DIM devices in Tuya APP. Wired connection Wireless connection 2. Lighting control settings After pairing the light device, click the device and change brightness by touch brightness slide. User Manual Ver 1.0.0 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6