Relais mit zwangsgeführten Kontakten
Owner's Manual for ELESTA relays models including: SIR312 P, SIR222 P, SIR4 Elesta PCB Mount Force Guided Relay, SIR4, Elesta PCB Mount Force Guided Relay, Mount Force Guided Relay, Force Guided Relay, Guided Relay
Bachofen AG | ELESTA Relays with forcibly guided contacts - A428872 | purchase online
File Info : application/pdf, 1 Pages, 526.29KB
DocumentDocumentRelays SIR4 Power Series Features - Relay with forcibly guided contacts according to IEC 61810-3 - Application type A - Protective separation (see insulation data) - Suitable for print mounting - Inrush current 60 A / continuous current 12 A - Contact assignment SIR312 P: 3 NO + 1 NC, SIR222 P: 2 NO + 2 NC Dimensions Pin dimension c Recommended drilling on PCB Coil data at 20 °C Nominal power (typ.) Holding power (typ.) Coil limit temperature 1,0 x 0,4 mm Ø 1,3 mm 0,75 W 0,23 W 120 °C Nominal voltage (VDC) Min. Pick-up voltage (VDC) Min. Drop-out voltage (VDC) Nominal current (mA) Resistance (Ohm) 5,0 3,5 0,5 151 33 (1 ± 10 %) 12,0 8,4 1,2 63 190 (1 ± 10 %) 18,0 12,6 1,8 42 432 (1 ± 10 %) 24,0 16,8 2,4 32 760 (1 ± 10 %) 48,0 33,6 4,8 16 3 050 (1 ± 10 %) 60,0 42,0 6,0 13 4 800 (1 ± 13 %) 110,0 77,0 11,0 7 16 000 (1 ± 15 %) Excitation voltage range Contact data Contact resistance as new (max.) Circuit diagram (top view) 100 m Contact data apply to contacts 11-12, 21-22, 23-24 Contact material Contact type AgSnO2 + 0,2, ..., 0,4 m Au crown contact Rated switching power 1 500 VA 250 V / 6 A / AC-1 (max.) Electr. life time (0,1 Hz, rel. duty cycle 10%) 100 000 Inrush current 15 A for 20 ms Switching voltage range 5 V, ..., 250 V DC / AC Switching current range* 5 mA, ..., 6 A Switching power range* 60 mW, ..., 1 500 W (VA) Short circuit resistance** 1 000 A with pre-fuse SCPD 6 A gG / gL (fuse) Electrical life, Switching capacity, Continuous current see SIR4 series Contact data apply to contacts 33-34, 43-44 Contact material Contact type AgSnO2 single contact Rated switching power 5 760 VA 480 V / 12 A / AC-1 (max.) Electr. life time (0,1 Hz, rel. duty cycle 10%) 250 000 Inrush current 60 A for 20 ms Switching voltage range 5 ... 250 VDC / 5 ... 480 VAC Switching current range* 10 mA, ..., 12 A Switching power range* 120 mW, ..., 3 000 W (VA) Short circuit resistance** 1 000 A with pre-fuse SCPD 16 A gG / gL (fuse) * Reference values ** Prospective short-circuit current Electrical life (NO contacts) Insulation data Rated insulation voltage (IEC 60664-1) 250 VAC Basic insulation - Air and creepage distance (min.) 4 mm - Test voltage Double or reinforced insulation 2 500 Vrms / 1 min - Air and creepage distance (min.) 8 mm - Test voltage Double or reinforced insulation 4 000 Vrms / 1 min - Air and creepage distance (min.) 10 mm - Test voltage Open contact: Test voltage* Creepage resistance 5 000 Vrms / 1 min 1 500 Vrms / 1 min CTI 250 Pollution degree 2 Overvoltage category III Insulation resistance (min.) 100 M - Test voltage 500 VDC * Initial value Mechanical data Mechanical lifetime (min.) Switching frequency (max.) 10 x 106 operations 15 Hz Response time (NO closed) (typ.) 15 ms Drop-out time (NC closed) (typ.)* 4 ms Bounce time (typ.) NO: 6 ms / NC: 12 ms Shock resistance (16 ms) (min.) NO: 17g / NC: 7g Vibr. resistance (10-200 Hz) (min.) NO: 10g / NC: 4,5g Weight approx. 32 g Mounting position any Mounting distance (min.) 5 mm * without coil wiring Switching capacity (IEC 61810-1) AC-1: 240 V / 12 A MAX AC-15: 240 V / 6 A MAX DC-1: 24 V / 12 A MAX DC-13: 24 V / 7,5 A / 0,1 Hz MAX Switching capacity (UL 508) Continuous current per contact at load of: 1 or 2 contacts C600, R300 12 A MAX Contact load limit curve (DC) Other data Ambient temperature Thermal resistance Protection class Solder bath temperature Test method (heating) Approvals Flammability class UL File -40 °C, ..., +70 °C 55 K / W RT II 270 °C / 5 s A (group assembly) cULus, TÜV UL 94 V-0 E188 953 Sec. 3 Options, Accessories PCB socket SRP SIR4 Other coil designs possible Coils accord. to EN 50155 (railway applications) possible Test conditions: - Graph 1: Contact current 10 A MAX - Graph 2: without previous operation - Free-standing relay on PCB - Duty cycle 100% Product key SIR 2 2 2 P 24VDC XX SIR 2 2 2 P 24VDC XX Type designation Number of contacts NO Number of contacts NC Connection technology Power contacts Nominal coil voltage Options 2 = Solder terminals ELESTA GmbH, Heuteilstrasse 18, Phone: +41 81 303 54 00 CH - 7310 Bad Ragaz, Switzerland Worldwide: www.elesta-gmbh.com © Copyright 07/2024