Parts List
This section details the components of the HART HPID01 20 Volt Impact Driver. If a key number has multiple part numbers, please order the part that corresponds with the country of origin shown on the product's data label (CN = China, VN = Vietnam).
| KEY NO. | PART NO. | DESCRIPTION | QTY. |
|---|---|---|---|
| 1-CN | 941122275 | Data Label | 1 |
| 1-VN | 941123122 | Data Label | 1 |
| 2 | 660031017 | Screw (M3.5 x 16 mm, Torx Pan Hd.) | 8 |
| 3 | 630206007 | Bit Clip | 1 |
| 4 | 674140001 | Bit | 1 |
| 5 | 941114253 | Logo Label | 1 |
| 6-CN | 204023002 | Housing Assembly (Inc. Key Nos. 1 & 5) | 1 |
| 6-VN | 204023005 | Housing Assembly (Inc. Key Nos. 1 & 5) | 1 |
| 7-CN | 206896001 | Motor, Circuit Board, and Pinion Assembly | 1 |
| 7-VN | 206896004 | Motor, Circuit Board, and Pinion Assembly | 1 |
| 8 | 538372002 | Forward/Reverse Selector | 1 |
| 9 | 565389001 | Bumper | 2 |
| 10 | 680334036 | Pin | 2 |
| 11 | 610449039 | Ring Gear | 1 |
| 12 | 206895001 | Gear Box Assembly | 1 |
| 13 | 565260001 | Gasket | 1 |
| 14 | 206894001 | Gear Case and Sleeve Bearing Assembly | 1 |
| 15 | 660436005 | Screw (M4 x 25.4 mm, T-20 Torx, Pan Hd.) | 4 |
Not Shown: 995000853 Operator's Manual (961153055)
Wiring Diagram
The diagram illustrates the internal electrical connections for the HART HPID01 20 Volt Impact Driver. The main components and their connections are as follows:
- MOTOR: Connected to the switch assembly via red and black wires.
- SWITCH: Labeled "VS80B 25.1A 24Vd.c. 5E4 BB 1123456", it connects to the motor, LED, and contact plate.
- LED: Connected to the switch assembly via red and black wires.
- CONTACT PLATE: Connected to the switch assembly via red, black, and yellow wires.
Wire colors are used to denote connections: red and black wires for the motor; red, black, and yellow wires for the switch, LED, and contact plate.
Home | Hart Tools
