Philips Customer Service Support - Home | Philips
User Manual for PHILIPS models including: X5001, X5002, X5003, Wet Dry Electric Shaver, Electric Shaver, Wet Dry Shaver, Shaver, X5001 Electric Shaver
View support for your Shaver 5000X series Wet & dry electric shaver X5004/84 | Norelco
Wet & Dry Electric Shaver 5000X | Philips Norelco
File Info : application/pdf, 2 Pages, 2.48MB
DocumentDocument
1
3
2a 5
3a
1
2 3
2 1
4a
1×
2b
3b
4b
1
1
2 3
1
2
3
1
2
1
2
3
4
1
2
3
1
2 3
1
1 2
3
4
2
3
5
6
7
8
1
2
1x
1 1
2 3
3
4
5
1
6
7
8
9
10
11
12
1
2
1
2
1x
24
3
1
2
3
1
2
3 3
English
1
2
3
X5001, X5002, X5003, X5005, X5009
Important safety information
Only use the product for its intended purpose. Read this important information carefully before you use the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards or serious injuries. Accessories supplied may vary for different products.
Warning
- The supply unit is not included. To charge the
product, only use a supply unit that complies with
China GB standard GB4706.1-2005, 5 V , 1 A, IPX4, in order to guarantee electrical safety. We advise using Philips HQ87, or an equivalent certified supply unit. To obtain HQ87, please consult the Philips service hotline. Using a noncertified supply unit may cause hazards or serious injuries.
- This shaver is waterproof (Fig. 2). It is suitable for use in the bath or shower and for cleaning
© 2022 Koninklijke Philips N.V. All rights reserved 3000.084.8975.1 (15/06/2022) > 75%
>75 % recycled paper >75 % papier recyclé
under the tap. For safety reasons, the shaver can therefore only be used without cord. - This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
- Do not modify the supply unit.
- Do not use the supply unit in or near wall sockets
that contain an electric air freshener to prevent
2
irreparable damage to the supply unit.
- Do not use a damaged appliance. Replace damaged parts with new Philips parts.
- Because of hygiene, only one person should use the appliance.
- Unplug the appliance before cleaning it with water.
- Only use cold or lukewarm water to clean the appliance.
- Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids to clean the appliance.
- Water may drip from the socket at the bottom of the shaver when you rinse it. This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver.
- Only use original Philips accessories or consumables.
- Charge, use and store the product at a temperature between 10 °C and 35 °C.
- Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures.
- If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.
- Do not place products and their batteries in microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge batteries.
- If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
Problem Possible cause Solution
The appliance does not shave as well as it used to.
Hairs or dirt obstruct the shaving heads.
Clean the shaving heads thoroughly.
The shaving heads Replace the are damaged or shaving heads. worn.
Water is leaking from the bottom of the appliance.
During cleaning, water may collect between the inner body and the outer shell of the appliance.
This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the appliance.
electromagnetic fields.
Removal of built-in rechargeable battery
Support
For all product support such as frequently asked questions, please visit www.philips.com/support.
Recycling
- This symbol means that electrical products and batteries shall not be disposed of with normal household waste (Fig. 3).
- Follow your country's rules for the separate collection of electrical products and batteries.
The built-in rechargeable battery must only be removed by a qualified professional when the appliance is discarded. Before removing the battery, make sure that the appliance is disconnected from the wall socket and that the battery is completely empty.
Take any necessary safety precautions when you handle tools to open the appliance and when you dispose of the rechargeable battery.
When you handle batteries, make sure that your hands, the product and the batteries are
Troubleshooting
dry.
Problem
The appliance does not work when I press the on/off button.
Possible cause Solution
The appliance is Unplug the still connected to a appliance and power source. For press the on/off safety reasons, the button to switch appliance can only on the appliance. be used without cord.
The rechargeable Recharge the battery is empty. battery.
The travel lock is activated.
Connect the shaver to the power outlet to deactivate the travel lock.
The shaving unit is soiled or damaged to such an extent that the motor cannot run.
Clean the shaving heads thoroughly or replace them.
To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag before you discard them.
Only remove the battery if it is completely empty.
1 Pull the shaving unit off the shaver. 2 Use a flathead screwdriver to remove the top cap
of the housing. 3 Remove the screws. 4 Pull the inner parts out of the housing. If
necessary, use a pair of pliers. 5 Remove the rechargeable battery.
X500x_ZETA-X-CHINA_3000.084.8975.1_IID-SDFU-LFLT_foldedA7_BW.indd 1-4
05-07-22 14:57
1
2
3
-
GB4706.1-20055 V 1 AIPX4 HQ87 HQ87 - ( 1) USB - ( 2) - ( 2) - 8 - - - - - - - - - - 10 °C 35 °C - - - - - (EMF) Philips
www.philips.com/support
-
( 3) - /
/ /
1 2 3 4
5
- ""
- ""
: 15/06/2022
(Pb)
(Hg)
(Cd)
(Cr (VI) )
(PBB)
(PBDE)
PCB's
X
O
O
O
O
O
Electrical
contact pins
X
O
O
O
O
O
Power plug
X
O
O
O
O
O
Internal
metal parts
X
O
O
O
O
O
SJ/T 11364b
O(#5b X(#5b
9 7 8 7"
*19
(#
(#
b (#7a"a *19b
9 7 8 7"
*19
(#
(#
b (#7a"a *19b
9 7 8 7"
*19
(#
(#
b (#7a"a *19b
9 7 8 7"
*19
(#
(#
b (#7a"a *19b
9 7 8 7"
*19
(#
(#
b (#7a"a *19b
X500x_ZETA-X-CHINA_3000.084.8975.1_IID-SDFU-LFLT_foldedA7_BW.indd 5-8
05-07-22 14:57