Instructions for POWERTECH models including: 12031C, 1203-LB, 1202C, 6072, 31802, 1206, 9035, 9030, NS400P, EVE.GUN 50MICRON, PT30.FOAMGUN 50-M, 1203-LB Total Load, 1203-LB, Total Load, Load
Nov 6, 2024 — After removing the machine from its packaging, you will find the following parts on the machine body: 1. Chemical hose, connecting the machine to the ...
PT 30 - NaceCare Solutions
POWERTEC30 SETUP OF ALL TOOLS After removing the machine from its packaging, you will find the following parts on the machine body: 1. Chemical hose, connecting the machine to the chemical tank 2. Complete cap (12031C) for 1-liter chemical bottle 3. Tip (1203-LB) for chemical dosing 4. Male coupling for the water filling hose 5. Vacuum hose (345-L50-M38) 6. Chemical bottle 7. Spray hose (3440-L50-TG) 8. Spray/rinse gun (PT30.FGUN-M) 9. Telescopic handle (9011+9012) In a separate plastic bag you will find: 10a Tray for storing accessories on the top of the machine 10b User manual with pin (6072) for cleaning chemical injector 10c Clips for vacuum hose (31802) 10d Funnel (1206) for filling chemical bottle 10e Complete cap (1202C) for 5-liter chemical tank 10f Brushing accessory (9035) 10g Squeegee (9030) 10h Gun for Nebulization@100micron (PT30.NEBGUN-M) In another plastic bag you will find the following parts: 11a Complete filling hose (3481250C) 11b Coupling for connection to 3/4"-1/2" Male Thread (16136) 11c Coupling with screw for connection with hoses with different diameters (16139) 11d Special coupling for connection to sink (16137) In a specific bag you will find: 12. The complete injection-extraction wand for hard-floor (NS400P) In another bag you will find: 13. The gun for Turbo-nebulization@50micron (EVE.GUN@50MICRON) 14. The gun for Turbo-nebulization@50micron and Foam spraying (PT30.FOAMGUN@50-M) 15. The blower hose (3450-L50-22), to be connected to the guns EVE.GUN@50MICRON or PT30.FOAMGUN@50-M 14 10h 10c 8 7 1 3 12 13 10a 2 6 9 10g 10f 10e 10b 10d 11d 11c 11b 11a 4 15 5 Hand-guns Powertec30 can be used with the cleaning and sanitising gun to perform cleaning and sanitising by foaming and rinsing surfaces, or with other manual accessories, which enable it to perform quick sanitization of already cleaned surfaces. ACCESSORY AND FUNCTION CHEMICAL DOSING SYSTEM CONNECTION OF THE ACCESSORY SPRAY NOZZLES PT30.FGUN-M The chemical is Through the dosed automatically spray/rinse hose. by the machine, which mixes it with CLEANING AND SANITIZING 1) FOAMING 2) RINSING clean water. PT30.NEBGUN-M The chemical is Through the dosed automatically spray/rinse hose. by the machine, QUICK SANITIZATION WITH NEBULIZATION@100MICRON which mixes it with clean water. 1 nozzle, used for both foaming and rinsing. Supplied with 2 nozzles: grey= lower pressure brown = higher pressure EVE.GUN@50MICRON The pure chemical must be placed in the tank on board the gun. Through the blow 1 single nozzle. hose, to be connected to the rear of the machine. QUICK SANITIZATION WITH TURBO-NEBULIZATION @50MICRON PT30.FOAMGUN@50-M The chemical is The gun is connected dosed automatically to the machine with 2 2 by the machine, hoses: 1 which mixes it with 1) QUICK SANITIZIATION WITH clean water. TURBO-NEBULIZATION @50MICRON 2) FOAMING WITH COMPACT FOAM -Spray/rinse hose -Blow hose, connected to the rear of the machine. Supplied with 2 nozzles: 1 = for turbonebulization @50micron 2 = for foamingAdobe PDF Library 24.4.252