Knightsbridge

M L Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable, Bedfordshire, LU5 4LT

Declaration of Conformity for UKCA Marking

In Accordance with EN ISO/IEC 17050-2:2004

M L Accessories Ltd. declare that:

Model Number(s) of Equipment: LEDTD1

Description of Equipment: 24V DC IP20 Touch Dimmer for LED Linkable Flat Striplights

Compliance with Directives

In Accordance with the following Directives:

UK SI 2016 No. 1091: Electro Magnetic Compatibility Regulations 2016
UK SI 2012/3032: Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
UK SI 2008/2852: Registration, Evaluation, Authorisation and Restriction of Chemicals

And their amending directives

Designed and Manufactured to Specifications

Has been designed and manufactured to the following specifications:

EN IEC 55015:2019
EN IEC 61000-3-2:2019
EN 61547:2009
EN 61000-3-3:2013+A1:2019

UKCA Marking Information

First date UKCA marking was applied to the product(s): 05/02/2014

Country of origin: China

Declaration Statement

We hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications. The product complies with all essential requirements of the directives.

Signatories

Signed:

[Signature of Lee Saunders]

On behalf of M L Accessories Ltd.

Name: Lee Saunders

Position: Technical Manager

[Signature of Catherine Connolly]

Name: Catherine Connolly

Position: CEO

Reports held: M L Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable, Bedfordshire, LU5 4LT

Company: ML ACCESSORIES LTD

Markings: UK CA

	Knightsbridge LEDTD1 EC Declaration of Conformity Official EC Declaration of Conformity for the Knightsbridge LEDTD1 24V DC IP20 Touch Dimmer for LED Linkable Flat Striplights, confirming compliance with EMC Directive, RoHS, and REACH standards.
	Knightsbridge LDGL6 Declaration of Conformity for UKCA Marking Official Declaration of Conformity for the Knightsbridge LDGL6 230V IP65 6W LED Stainless Steel Recessed Ground Light 3000K, confirming compliance with UKCA marking standards and relevant UK directives.
	Declaration of Conformity for UKCA Marking - LWS2G Grey LED Wall/Guide Light Official Declaration of Conformity for the Knightsbridge LWS2G 230V IP44 3W LED Square Wall/Guide light - Grey, confirming compliance with UKCA marking directives and specifications.
	Declaration of Conformity for UKCA Marking - Knightsbridge EMLED2A Emergency Bulkhead Official Declaration of Conformity for the Knightsbridge EMLED2A 230V IP65 3W LED Emergency Bulkhead, confirming compliance with UKCA marking requirements and relevant UK regulations and harmonised standards.
	Knightsbridge LEDDIMMER Declaration of Conformity for UKCA Marking Official Declaration of Conformity for the Knightsbridge LEDDIMMER, a LED Dimmer for Flat and Triangular LED Strips, issued by M L Accessories Ltd., confirming compliance with UKCA marking and relevant safety and electromagnetic compatibility regulations.
	Declaration of Conformity for Knightsbridge RWL5A LED Guide Light (UKCA) Official Declaration of Conformity for the Knightsbridge RWL5A 230V IP54 5W LED Guide Light - Anthracite, confirming compliance with UKCA marking standards and relevant directives.
	Knightsbridge AMLEDBS LED Security Bulkhead Declaration of Conformity Declaration of Conformity for the Knightsbridge AMLEDBS 230V IP54 5W LED Security Amenity Bulkhead with M-Sensor, detailing compliance with EMC, RoHS, REACH, and Radio Equipment Directives and relevant EN/ETSI specifications.
	Knightsbridge 24VDCA LED Driver EC Declaration of Conformity Official EC Declaration of Conformity for the Knightsbridge 24VDCA IP20 24V 12W LED Driver, confirming compliance with key EU directives including Low Voltage, EMC, RoHS, and REACH, along with relevant EN standards.

Compliance with Directives

Designed and Manufactured to Specifications

UKCA Marking Information

Declaration Statement

Signatories

Related Documents