Manuals+

OBZ User Manual

2D Wireless & Bluetooth Barcode Scanner

Model: M60

Contents

Factory Default

[QR Code: Factory Default Setting]

Power Off

[QR Code: Power Off Setting]

Note: Scan this barcode, the scanner will make a beep and power off. Alternatively, long press the scanner button and hold for 15 seconds to power off.

Technical Parameter

Date ItemParameter
Type of Light Source617 nm LED white
Decoding Accuracy≥4mil
Decoding Ability1D: Code 128, EAN-13, ISBN, ISNN, EAN-8, EAN-128, UPC-A, UPC-E, UCC, Code 32, Code 93, Code 39, Code 39 Full ASCII, Codebar, Interleaved 2 of 5, Industrial 2 of 5, Standard 2 of 5, IATA 2 of 5, Matrix 2 of 5, MSI Plessy, ITF-14;
2D: QR Code, Micro QR Code, PDF-417, MicroPDF417, DataMatrix, Aztec Code, DM Code, Gs1, Gs1 QR Code
Scanning PrincipleCMOS
Scan ModeManual Scan / Continuous Scan /Auto-sensing
Resolution640x480px
The Distance Between The Scan And The Barcode25mm-150mm (13mil 90%PCS)
Bit Error Rate1/5 million
Data Saving ModeAutomatic Storage Mode (default) / Instant Upload Mode (Normal Mode) / Inventory Storage Mode
Storage Ability512, 000 Bytes
Connection WaysBluetooth; 2.4Ghz Wireless
System CompatibilityiOS, Android, Windows, Linux
MaterialABS+PC
InterfaceUSB-HID
Working Current280mA
Working VoltageDC 5V±5%
Lithium Battery800mA
Charging Time2.5h
Battery Working4h
Shock ResistanceWithstand multiple 3 meters free fall
Operating Temperature-20°C~50°C
Storage Temperature-40°C~70°C
Operating Humidity5%-95% RH without condensation

Warning

1. Unboxing: Open the package and check if the accessories are complete. Package included: 1 x Barcode Scanner, 1 x 2.4G USB Receiver, 1 x USB Charging Cable, 1 x Manual. If there is any questions, please contact OBZ support. (email: support@obzshop.com)

2. Charging: LED1 green light always on; When charging is complete, LED1 off.

3. Do not scan the setting barcodes in the manual without instruction, as it may cause the barcode scanner to not work properly.

4. Some symbologies are not enabled by default. If you have a request, you can find them in the user manual under "Barcode Settings" to enable them. For more barcodes not available in the user manual, please contact OBZ for help.

Scanner Diagram Description: The scanner has a Scan Window on the front, a Trigger Button, a Power Port on the back, and two LEDs labeled LED 1 and LED 2.

USB Receiver Pairing Instructions

Step 1:

Method 1: Press and hold the button for 8 seconds until the scanner LED1 indicator flashes, indicating it enters pairing state.

Method 2: Scan the following pairing codes [QR Code: Pairing Code I] and [QR Code: Pairing Code II] in sequence. The scanner LED1 indicator will flash, indicating it enters pairing state.

Step 2:

Plug the USB receiver into the computer's USB port. The scanner LED1 indicator will be always on, indicating that pairing is complete.

Step 3:

Open a text editor (like Notepad) on the device. Use the scanner to scan compatible barcodes; the scanned data will be output in the editor.

Note:

1. After scanning the pairing codes or long-pressing the button to enter pairing state, please insert the USB receiver into the computer within one minute. If pairing is not completed within one minute, you need to scan the pairing codes or long-press the button again.

2. Only one device can be connected at a time. If you need to connect to another Bluetooth device, please turn off Bluetooth on the original device first and unplug the USB Receiver.

Bluetooth Pairing Instructions

Step 1:

Method 1: Press and hold the button for 8 seconds until the scanner LED1 indicator flashes, indicating it enters pairing state.

Method 2: Scan the following pairing codes [QR Code: Pairing Code I] and [QR Code: Pairing Code II] in sequence. The scanner LED1 indicator will flash, indicating it enters pairing state.

Step 2:

Open Bluetooth on your mobile device and search for "R&B40". Click to pair. The scanner LED1 indicator will be always on, indicating that pairing is complete.

Step 3:

Open a text editor (like Notepad) on the device. Use the scanner to scan compatible barcodes; the scanned data will be output in the editor.

Note:

1. After scanning the pairing codes or long-pressing the button to enter pairing state, please complete the pairing within one minute. If pairing is not completed within one minute, you need to scan the pairing codes or long-press the button again.

2. Only one device can be connected at a time. If you need to connect to another Bluetooth device, please turn off Bluetooth on the original device first and unplug the USB Receiver.

Mobile Phone Bluetooth Connection Guide

The guide shows screenshots of connecting to Bluetooth on an iPhone. It displays the Bluetooth settings screen, showing available devices and the process of pairing with "R&B40". A "Bluetooth Pairing Request" pop-up appears, asking to pair with the iPhone. After pairing, "R&B40" is shown as connected.

Windows Computer Bluetooth Connection Guide

The guide shows screenshots of connecting via Bluetooth on a Windows computer. It illustrates the "Add a device" screen, selecting "R&B40", and a confirmation screen "Your device is ready to go!". It also shows the Windows Bluetooth & other devices settings, confirming "R&B40" is connected.

Keyboard ON or OFF in IOS device

Scan the following QR code [QR Code: Enable/Disable iOS Keyboard] to enable or disable the keyboard function on an iOS device.

Scan Mode

Select the desired scan mode:

Data Saving Mode

Choose how data is saved:

Data Upload Instruction in Inventory Mode

Instructions for uploading data when in Inventory Mode:

Note:

1) Instant Upload Mode: Data is uploaded immediately after scanning. If out of range, data is not saved, and alarm beeps will sound.

2) Automatic Storage Mode (default): If the scanner is in range, data uploads directly. If out of range, alarm beeps sound, and data is saved to the memory chip. Press the scanner trigger to upload saved data when back in range.

3) Inventory Mode: Data is saved to the memory chip. Upload data to your device by scanning the set code in the manual (Refer to "Data Upload Instruction in Inventory Mode"). For example, scanning "Upload all data" will upload all data saved in the memory chip.

Transmission Speed

Configure transmission speed:

Keyboard Caps Lock Control

Control Caps Lock behavior:

Keyboard Language

Select keyboard language:

Buzzer Setting

Configure buzzer:

Sleep Time Setting

Set sleep timer:

Barcode Settings

Reverse Barcode Setting

All 1D Barcodes

All 2D Barcodes

EAN-8

EAN-13

UPCA

UPC-E0

UPC-E1

Interleaved 2 of 5

Industrial 2 of 5

Codabar

Code 39

QR Code

PDF 417

DataMatrix

Barcode Conversion

EAN 13 Converts ISSN

EAN 13 Converts ISBN

UPCA Converts EAN13

Additional Code

2-bit Additional Code for EAN-8

5-bit Additional Code for EAN-8

2-bit Additional Code for EAN-13

5-bit Additional Code for EAN-13

2-bit Additional Code for UPC-E1

5-bit Additional Code for UPC-E1

2-bit Additional Code for UPCA

5-bit Additional Code for UPCA

End Character

Prefix Setting

Example: Add prefix "A"

Step 1: Scan the "Add Prefix" QR code.

Step 2: Scan the "Prefix" QR code.

Step 3: Scan the numeric code corresponding to "A". The ASCII value of A in Hexadecimal is "4" "1" (Refer to Appendix 1 & Appendix 2).

Step 4: Scan the "Save" code to save the settings (Refer to Appendix 1).

Suffix Setting

Note: The method for adding a suffix is the same as adding a prefix.

Data Codes (Appendix 1)

The following QR codes represent numeric and alphabetic characters used for setting prefixes and suffixes:

Numbers: [QR Code: 0], [QR Code: 1], [QR Code: 2], [QR Code: 3], [QR Code: 4], [QR Code: 5], [QR Code: 6], [QR Code: 7], [QR Code: 8], [QR Code: 9]

Letters: [QR Code: A], [QR Code: B], [QR Code: C], [QR Code: D], [QR Code: E], [QR Code: F]

[QR Code: Save] Save

Appendix 2: ASCII Table

HexCharCharHexChar
00NUL (Null char.)40@ (AT Symbol)
01SOH (Start of Header)41A
02STX (Start of Text)42B
03ETX (End of Text)43C
04EOT (End of Transmission)44D
05ENQ (Enquiry)45E
06ACK (Acknowledgment)46F
07BEL (Bell)47G
08BS (Backspace)48H
09HT (Horizontal Tab)49I
0aLF (Line Feed)4aJ
0bVT (Vertical Tab)4bK
0cFF (Form Feed)4cL
0dCR (Carriage Return)4dM
0eSO (Shift Out)4eN
0fSI (Shift In)4fO
10DLE (Data Link Escape)50P
11DC1 (XON) (Device Control 1)51Q
12DC2 (Device Control 2)52R
13DC3 (XOFF) (Device Control 3)53S
14DC4 (Device Control 4)54T
15NAK (Negative Acknowledgment)55U
16SYN (Synchronous Idle)56V
17ETB (End of Trans. Block)57W
18CAN (Cancel)58X
19EM (End of Medium)59Y
1aSUB (Substitute)5aZ
1bESC (Escape)5b[ (Left / Opening Bracket)
1cFS (File Separator)5c\ (Back Slash)
1dGS (Group Separator)5d] (Right / Closing Bracket)
1eRS (Request to Send)5e^ (Caret / Circumflex)
1fUS (Unit Separator)5f_ (Underscore)
20SP (Space)60` (Grave Accent)
21! (Exclamation Mark)61a
22" (Double Quote)62b
23# (Number Sign)63c
24$ (Dollar Sign)64d
25% (Percent)65e
26& (Ampersand)66f
27' (Single Quote)67g
28( (Left / Opening Parenthesis)68h
29) (Right / Closing Parenthesis)69i
2a* (Asterisk)6aj
2b+ (Plus)6bk
2c, (Comma)6cl
2d- (Minus / Dash)6dm
2e. (Dot)6en
2f/ (Forward Slash)6fo
30070p
31171q
32272r
33373s
34474t
35575u
36676v
37777w
38878x
39979y
3a: (Colon)7az
3b; (Semi-colon)7b{ (Left/ Opening Brace)
3c< (Less Than)7c| (Vertical Bar)
3d= (Equal Sign)7d} (Right/Closing Brace)
3e> (Greater Than)7e~ (Tilde)
3f? (Question Mark)7fDEL (Delete)

FAQ

1.Q: Why does the USB receiver display a driver error (BLE Remote KMA Dongle) when connecting to the computer?

A: This error prompt (BLE Remote KMA Dongle) is for USB receiver upgrade; it does not affect pairing and usage.

2.Q: Why can't the scanner read the reverse barcode (white code on black background)?

A: The reverse barcode is disabled by default. Please scan the enable setup code on page 13 of this manual to enable it.

For more settings, please contact OBZ tech support. Service support: support@obzshop.com

THANK YOU FOR CHOOSING OBZ.

Models: M60 2D Wireless and Bluetooth Barcode Scanner, M60, 2D Wireless and Bluetooth Barcode Scanner, and Bluetooth Barcode Scanner, Bluetooth Barcode Scanner, Barcode Scanner, Scanner

PDF preview unavailable. Download the PDF instead.

91HXov9rHbL CorelDRAW 2020 iLovePDF

Related Documents

Preview OBZ Mini 2D Bluetooth Barcode Scanner M60 Connection Guide
Step-by-step instructions for connecting the OBZ Mini 2D Bluetooth Barcode Scanner (Model M60) via Bluetooth and 2.4Ghz USB dongle.