Welcome
Thank you for choosing the Arlo Solar Panel. Getting started is easy.
What's Included
- Solar panel
- Mount
- Screws (3)
- Power cable
- Quick Start Guide
Position Your Arlo Solar Panel
The amount of energy your Arlo Solar Panel can produce is influenced by sunlight, weather conditions, and debris. For optimal performance, position the panel in a location that receives maximum sunlight throughout the year. Regularly clean the panel to ensure efficient energy harvesting.
For best results:
- Choose a location with ample sunlight year-round.
- Wipe the panel periodically to remove dust or debris.
Install Your Solar Panel
- Place the mount near your Arlo Pro or Arlo Go camera.
- Secure the mount using the provided screws.
- Attach your solar panel to the mount.
- Adjust the panel's angle for maximum sunlight exposure.
Connect Your Solar Panel to Your Camera
- Align the power cable with the clips on the solar panel's back.
- Secure the cable by pinching the clip and inserting it into the solar panel port.
- Connect the other end of the cable to your Arlo camera (Arlo Pro or Arlo Go).
You're Done!
Congratulations! Your Arlo system is set up and ready to go. For tutorial videos, troubleshooting tips, or support, visit Arlo Support.
Regulatory Information
NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. For regulatory compliance information, visit NETGEAR Regulatory. For the EU Declaration of Conformity, visit NETGEAR EU Declaration.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Center
Curraheen Road, Cork, Ireland
August 2017
