Audionic AirBuds 2 Wireless Earbuds

Powering On/Off Earbuds

To power on the earbuds, remove them from the charging box. To power off, place them back into the charging box. Alternatively, long-press either earbud until it powers on or off.

Pairing Instructions

Remove the earbuds from the charging box. Ensure the earbuds' LEDs are flashing red and blue. The left and right earbuds will pair automatically. On your phone, switch on Bluetooth and search for the device named "AirBuds 2" to connect.

Usage Tips

• Indoor Use: For optimal performance, use in a room without significant wall barriers and maintain a close distance between the earbuds and your phone.
• Outdoor Use: In areas with strong WiFi/4G signals or other electronic appliances, sound may experience stuttering or interruption.
• Waterproof Rating: The earbuds are not suitable for use in swimming pools. They are rated IPX5, offering resistance to light rain and sweat.
• One Earbud Not Working: If only one earbud is producing sound, place both earbuds back into the charging case, close the cover, remove them again, and check. If the issue persists, delete "AirBuds 2" from your phone's Bluetooth settings, turn off Bluetooth, and re-pair the earbuds.

Main Specifications

• Model NO.: AirBuds 2
• BT Version: V5.1
• Wireless distance: 10 m
• Audio decoding: AAC, SBC
• Input: DC 5V=1A
• Battery capacity of charging box: 300 mAh
• Battery capacity of headset: 40 mAh (single earbud)
• Play time: about 4-5 hrs (single charge)
• Charging time for charging box: about 1 hour

Scan for Extended Warranty

Activation Code: 269317

Charging Information

Charging for Earbuds: Earbuds' LED shows red while charging, and the charging case's LED shows blue. When fully charged, the earbuds' and charging case's lights turn off.

2-Way Charging for Case:

1. USB-C Cable: Use the provided USB-C cable for charging. (Package does not include a wireless charger).

Charging Indicator: The charging case LED flashes white while charging and shows solid white when fully charged.

Touch Controls

Touch for Music:

• Play/Pause: Short press the touch pad on either earbud.
• Next Track: Double press the touch pad on the right earbud.
• Previous Track: Double press the touch pad on the left earbud.
• Volume Up: Triple press the touch pad on the right earbud.
• Volume Down: Triple press the touch pad on the left earbud.

Touch for Call:

• Answer/End Call: Short press the touch pad on either earbud.
• Reject Call: Long press the touch pad on either earbud.
• Voice Assistant: Long press the touch pad for 3 seconds on either earbud.

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by Shenzhenshi Xuanfeng Shengwu Keji Youxiangongsi may void the FCC authorization to operate this device. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device is installed and operated without restriction.