Manuals+

Philips HF-Selectalume II for TL5 lamps

The HF-Selectalume II TL5 is a highly efficient, reliable, and cost-effective lighting solution designed for fluorescent lamps. It is suitable for a wide range of commercial applications, including office lighting, parking garages, and warehouses. The ballast is primarily designed for indoor use, but can be used in outdoor applications if the luminaire offers sufficient protection against water and dust. It is also recommended to install protection against lightning surges.

Product Data

General Information
Application CodeHE IIPower Factor 100% Load (Nom)0.99
Type VersionPreheat Time0.5 s
Lamp TypeTL5Mains Voltage Performance (AC)202-254V -8% / +6%
Number of Lamps2 piece/unitMains Voltage Safety (AC)198-264V -10% / +10%
Number of Products on MCB (16A Type B) (Nom)28Earth Leakage Current (Max)0.5 mA
Automatic RestartYesInrush Current Width0.25 ms
Ballast Factor (Nom)1
Power Losses (Nom)2.0-5.5 W
Inrush Current Peak (Max)24 A
Efficiency at full load [%]93.3%
Operating and electricalWiring
Input Voltage220 to 240 VConnector Type Input TerminalsWAGO 744 connector
Input Frequency50 to 60 HzCable Capacity Output Wires Mutual (Max)200 pF
Operating Frequency (Nom)45 kHz
Crestfactor (Nom)1.7

System Characteristics

Rated Ballast-Lamp Power14-35 W
Rated Lamp Power on TL5 HE14/35 W
System Power on TL5 HE30.5/76.5 W
Lamp Power on TL5 HE28.5/71.0 W
Power Loss on TL5 HE2.0/5.5 W

Temperature

T-Ambient (Max)55 °C
T-Ambient (Min)-20 °C
T-Storage (Max)50 °C
T-Storage (Min)-40 °C
T-Case Lifetime (Nom)75 °C
T-Case Maximum (Max)75 °C

Mechanical and housing

HousingL360x30x22

Emergency operation

Nominal Light Output After 60 Seconds100% of EBLF
Nominal Light Output After 5 Seconds50% of EBLF

Approval and application

Energy Efficiency IndexA2 BAT
IP ClassificationIP 20 [Ingress Protection 20]
EMI 9 kHz ... 30 MHzEN55015
Vibration StandardIEC68-2-6 Fc
Bumps StandardIEC 68-2-29 Eb
Approval MarksCE marking, ENEC certificate, CCC certificate, C-Tick certificate, TISI marking, SIRIM approval, CCC certificate
Hum And Noise Level30 dB(A)

Product Data

Full product codeHF-S 214-35 TL5 HE II 220-240V
Order product nameHF-S 214-35 TL5 HE II 220-240V 50/60Hz
EAN/UPC - Product871829175844000
Order code75844000
Local order codeHFS214-35/TL511
Numerator - Quantity Per Pack1
Numerator - Packs per outer box12
Material Nr. (12NC)913713042166
Net Weight (Piece)0.245 kg

Dimensional drawing

Diagram Description:

The diagram shows the dimensions of the HF-S 214-35 TL5 HE II 220-240V ballast. Key dimensions are labeled:

  • A: 360.0 mm
  • A1: 350.0 mm
  • A2: 22.0 mm
  • B1: 30.0 mm
  • C1: 4.2 mm

The drawing includes a top view and a side view of the ballast, indicating mounting points and overall length and width.

Models: HF-S 214-35 TL5 II 220-240V 50 60Hz Selectalume lamps, HF-S 214-35 TL5 II 220-240V 50 60Hz, Selectalume lamps, lamps

File Info : application/pdf, 3 Pages, 364.66KB

PDF preview unavailable. Download the PDF instead.

913713042166 EU.en IL.PROF.FP

References

AH XSL Formatter V6.5 MR4 for Linux64 : 6.5.7.32653 (2018/03/26 12:18JST) Antenna House PDF Output Library 6.5.1231 (Linux64)

Related Documents

Preview Philips HF-Performer Intelligent Ballast for TL5 HE/HO Lamps - Product Description
Detailed product description for the Philips HF-Performer Intelligent electronic ballast designed for TL5 HE/HO fluorescent lamps. Includes features, benefits, applications, and technical specifications.
Preview Philips HF-Regulator II for TL-D Fluorescent Lamps - HF-R 158 TL-D EII 220-240V 50/60Hz
Technical specifications and product details for the Philips HF-Regulator II HF-R 158 TL-D EII, a high-frequency electronic ballast for TL-D fluorescent lamps with 1-10V analog dimming protocol.
Preview Philips HF-Essential II for TL5/TL-D Ballasts - Technical Specifications
Detailed technical specifications and product information for the Philips HF-Essential II ballasts, designed for TL5 and TL-D fluorescent lamps, operating at 220-240V and 50/60Hz.
Preview Philips HF-REGULATOR II 1-10V TL-D HF-R 158 Datasheet
Technical specifications and product data for the Philips HF-REGULATOR II 1-10V TL-D, model HF-R 158 TL-D EII 220-240V 50/60Hz. This electronic ballast features analog 1-10V dimming for TL-D lamps.
Preview Philips Lamp Drivers and Lighting Controls: Energy-Efficient Solutions for Modern Lighting
Explore Philips' comprehensive range of high-performance lamp drivers and advanced lighting controls. Discover solutions designed for energy efficiency, enhanced reliability, and simplified installation across fluorescent, HID, indoor, and outdoor lighting applications. Learn about features like dimming, smart controls, and long-term performance.
Preview Philips LEDtube Universal Installation Guide
Comprehensive installation guide for Philips LEDtube Universal, detailing compatibility with various ballasts, step-by-step installation procedures for electromagnetic and electronic ballasts, and essential safety warnings.
Preview Philips LEDtube Universal Installation Guide
A comprehensive installation guide for Philips LEDtube Universal, detailing compatibility with electromagnetic and electronic ballasts, and providing step-by-step instructions for installation and wiring.
Preview Philips MASTER TL5 High Output Fluorescent Lamp Specifications and Features
Detailed information on the Philips MASTER TL5 High Output fluorescent lamp, including its benefits, features, technical specifications, dimensions, and applications in offices, industry, and retail environments.