Instructions for Joyway models including: JW1407HT, JW1407HS, JW1407HT T-Sensor APK for Android Download, JW1407HT, T-Sensor APK for Android Download, APK for Android Download, Android Download
3.Adddevice TurnonBluetooth——click" "toenterthecontrolinterface——click"AddDevice" ——youcanselectthesearchrange,thesearchwillbecompletedin5——20seconds
Shenzhen Joyway 江海汇科技
Joyway T-Sensor Manual 1. Product characteristics Mobile app `T-Sensor' can connect nearby bluetooth sensor device and display values and graphs in screen. It support air temperature, humidity, air-pressure and altitude in real time. The app will save the data and can export it as PDF file. Device JW1407HT, can monitor temperature and humidity at the same time: (1) Temperature measurement range: -20 to 60. Error: ±0.3. (2) Humidity measurement range: 10%RH to 90%RH. Error: ±3%RH. (3) Measurement interval: 5 seconds by default setting. (4) Waterproof level: IP65. Device JW1407HTS, can store data in flash memory without keeping bluetooth connection all the time. Device JW1407PTA can measure air-pressure and estimate the altitude: (1) Air pressure measurement range: 300 hPa to 1200 hPa. (2) Estimated altitude: resolution 0.1m. (3) Measurement interval: 5 seconds. (4) Waterproof level: IP66. 2. Operation instructions 1. APP download To download the APP (Android), please scan the following QR code to download. 2. Open the APP Main interface, as shown in the figure: 3. Add device Turn on Bluetooth ---- click " " to enter the control interface ---- click "Add Device" ---- you can select the search range, the search will be completed in 5----20 seconds -- -- click "Done" twice after adding ---- choose which devices and curves to display type 4. Change avatar and name Click on the device to enter the settings interface -- -- customize head portraits and name 5. Alarm settings 1 Alarm interval setting: Click the device to enter the setting interface ---- select the alarm type ---- turn on the alarm function ---- select the alarm interval 2 Alarm mode: Click " " to enter the control interface ---- click "Alert mode and time length" to modify the settings 6. Calibration settings Click the device to enter the setting interface----select the calibration type----add calibration value 7. Reset Click the device to enter the setting interface ---- click "Reset Settings" to restore the alarm settings and calibration settings to the default settings. 8. Clear data Click the device to enter the setting interface ---- click "Clear measured data of this device" 9. Delete and restore devices Delete device: Click the device to enter the setting interface ---- click "Delete Device", as shown in the figure: Restore the device: Click " " to enter the control interface ---- click "Deleted Device" ---- select deleted "Undelete" Note: "Permanently delete" will delete all data saved on the device on the phone 10. Export data Click " " to enter the control interface ---- click "Export Data" ---- check the target device, export TEXT or EXCEL ---- select the opening method ---- open the EXCEL/TXT file ---- view all data, select the opening method ---- share the file to WeChat, QQ, email, etc. 11. Data curve graph View data: Click " " to view the data change graph, which can be stretched horizontally (refining time nodes) or longitudinally (refining temperature gaps) View past data: Click " " to switch dates Curve data type: Click: " or curve data type " to enter the curve settings ---- select the target device 12. APP update and device update APP update: After restarting the APP, you will be reminded to update. 3 Device update, click "UPDATE", as shown in the picture Note: Do not exit the APP or disconnect during the update 13. Exit the APP and keep it running in the background Click " " to enter the control interface ---- click "Exit" ---- select "Run in background" or "Exit" Note: If you select "Exit", subsequent data will no longer be recorded and the device will be disconnected. 14. Working Parameters Transmitting Power: +4,0,-4,-8,-12 dBm Advertising Interval(ms): The longer the longer the less energy Measuring Interval(ms): The longer the longer the less energy Note: After changing the Settings, please click "SAVE WORKING PARAMS" 15. Flash memory Chose the start time and the end time----touch" "----You could view it in " " Note: Do not exit the APP or disconnect during data reading <end>WPS 文字