Product Registration & Owner Information
[QR Code Description]: Scan the QR code on your product's serial tag to unlock product registration, warranty information, installation instructions, how-to videos, and additional accessories. For smart appliances, it guides app download and connection.
Access full Installation, User Maintenance, and Operating Instructions, plus warranty details, online at:
Visiting the website may save you the cost of a service call. For a free printed copy, call:
U.S.A.: 1-800-422-1230
Canada: 1-800-807-6777
Or write to:
KitchenAid Brand Home Appliances
Customer Experience Center
553 Benson Road
Benton Harbor, MI 49022-2692
KitchenAid Brand Home Appliances
Customer Experience Center Unit
200-6750 Century Ave.
Mississauga, Ontario L5N 0B7
Register your product to access warranty information and receive important notifications. Scan the Photo Registration Card or QR code to register.
⚠️ WARNING: To reduce the risk of fire, electric shock, or injury to person, read the Important Safety Instructions located in the Safety and Installation Instructions provided before installing or operating this appliance.
Operating Instructions
Follow these steps for basic operation:
Prepare and Load the Dishwasher: (12 Place Setting Recommended Loading Pattern)
Arrange dishes in the racks. Ensure items do not obstruct the spray arms.
Add Detergent and Rinse Aid: Add as needed to the dishwasher.
Check Spray Arms: Ensure all spray arms spin freely. Items in the rack can block them.
Select Cycle: Choose the desired cycle for your load. Available cycles include ProWash, Tough, Normal, Express Wash, and Rinse Only.
Select Options: Choose additional options if desired. Available options may include Hi Temp Wash, Sani Rinse, Heat Dry, 2-4-8 Hr Delay, and Extended.
Start Cycle: Press Start/Resume. Close the door within 4 seconds for top control models.
Note: Not all cycles, options, and features are available on all models. Appearance may vary.
Sanitation Cycles
Sanitized Cycles clean and sanitize dishes and glassware in accordance with NSF International NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Only sanitizing cycles are designed to meet the NSF/ANSI 184 performance standard for soil removal and sanitization efficacy.
There is no intention, either directly or indirectly, that all cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy.
User Maintenance Instructions
Filter Cleaning
Filters should be removed and cleaned every 1-3 months for best performance.
Remove Filter Cup: Pull out the lower rack. Grasp the Filter Cup and rotate it 1/4 turn counterclockwise. Pull up to remove.
Remove Filter Plate: Remove the Filter Plate.
Rinse Components: Rinse both the Filter Cup and Filter Plate under cold water in a sink. A soft brush can be used to remove stuck-on food.
Replace Filter Plate: Ensure the filter plate is correctly seated under the tabs.
Install Filter Cup: Push the filter cup down through the opening. Turn clockwise to seat. The filter cup will click into place when seated properly.
Do not operate dishwasher with loose or missing filters.
Important Safety Warnings
⚠️ Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door. Doing so can result in serious injury or cuts.
⚠️ General Safety Warning
To reduce the risk of fire, electric shock, or injury to persons, read the Installation, User Maintenance and Operating Instructions printed and online before installing or operating this appliance.
