DJI RONIN-SC BG18 GRIP
Product Information
Introduction
The BG18 Grip makes the RONIN™-SC compatible for handheld use. A 2450 mAh built-in battery powers the gimbal for up to 11 hours.
[Image Description: The DJI BG18 Grip is a cylindrical handheld accessory with a textured grip surface and a base that likely contains a power button and charging port.]
Usage
For detailed usage instructions, visit the official user manual at: https://www.dji.com/ronin-sc
Specifications
Input Power:
- Model: RB2-2450mAh-7.2V
- Type: 18650 Lithium
- Capacity: 2450 mAh
- Energy: 17.64 Wh
After-Sales Service
For after-sales service, please refer to: http://www.dji.com/service
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMO™ product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO.
By using this product, you signify that you have read this disclaimer and warning carefully and agree to abide by the terms and conditions herein. You are solely responsible for your own conduct while using this product and for any consequences thereof. You agree to use this product only for proper purposes and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies, and guidelines DJI OSMO has made available.
DJI OSMO accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices, including those set forth in this document.
Your statutory rights under applicable national legislation are not affected by this disclaimer.
Compliance Information
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
EU Compliance Statement
SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance.
EU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany.
IC Compliance
This device complies with ICES-003 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Environmentally Friendly Disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
