User Manual for HASWILL ELECTRONICS models including: HDL-W116-10T, W116 Panel Temperature Data Logger with Bluetooth, W116 Panel Temperature Data Logger, Panel Temperature Data Logger, Temperature Data Logger, Data Logger, Logger, W116
W116 Panel Temperaturdatenlogger mit BlueTooth – Haswill Electronics
Title: W116 Bluetooth Temperature Data Logger Insutruction Author: Haswill Electronics Subject: W115 is a temperature data logger with built-in lithium battery and blue tooth connect.
W116 Panel Temperature Data Logger with Bluetooth (HDL-W116-10T) User Manual Type-C Overview W116 series are panel temperature data loggers which supports Bluetooth connection (ESC protocol), monitor and record the temperature data of food, medicine, chemical supplies, and other objects during storage and transportation. Dimension & Weight Whole99.4 * 70.2 * 11.4 mm (W*H*T) Front Panel99.4 * 70.2 * 2 mm (W*H*T) Back Panel82.5 * 48.5 * 9.4 mm (W*H*T) Net weight: 65 gsm Buttons and Operation Method There are 3 buttons on the right of the front panel. Mainly exist two actions: 1. Short Press: Press the button and release at once. 2. Long Press: hold down the button for 4 seconds. Short Press Short Press Short Press Long Press Long Press Long Press Next Menu Previous Menu Print a strip Start the records Stop the rocords Print the records Short Press Long Press + Lock/Unlock the keys + Wipe All Data (ensure stop recording firstly) 1 Power Built-in Li-ion Battery, the type C interface is used for charging and data transmission. Power on/off [Power on] Plug it into a type-C charger; [Power off] Unplug the type-c charger, make sure the buttons are not locked, and then press and hold all the buttons for 4s to shut down. Enable Recording Long press the button to active the recording, the screen will shows if successful Disable Recording Long press the button to stop the recording, the screen will shows if successful Select A Trip From Trips List Short press the button, the screen will shows , which means all trips; Now you can press the key (Next) or the key (Previous) to select one trip; Print One Trip's Data Long press the button to print one trip's data, the screen will shows , which means it will print soon. Tip: it will print the latest trip if you did not select it. Output Data And Generate Reports Connect this device to a computer by a type C cable, and you will find a U-Disk where storage all data and reports, more options are available with the help of the accompanying software. 2 LCD Diagram 3 8 6 2 7 9 1 5 10 4 16 15 17 11 14 12 13 1 Temperature display interface 10 Keys lock icon 2 Date display interface 11 No alarm icon 3 Time display interface 12 Over limit icon 4 Upper limit display interface 13 Record status icon 5 Lower limit display interface 14 USB connection status icon 6 Record points display interface 15 Non-recording status icon Lowest temperature record 7 display interface 16 Temperature unit 8 Highest temperature record display interface 17 Bluetooth identifier 9 Battery level 3 LCD Menu 1 Real Time Temp 2 Date 3 Time 4 Recordable Temp. Upper Limit 5 Recordable Temp. Lower Limit 6 Records Count 7 Highest Temp. in Records 8 Lowest Temp.in Records 4 Battery Level Instruction Battery level Remaining capacity 60% ~ 100% 20% ~ 60% 10% ~ 20% < 10% Note: 1 When the remaining battery capacity is less than 20%, it is recommended to replace the battery to prevent inconvenience; 2 When the remaining battery capacity is less than 10%, please replace the battery as soon as possible to prevent the battery from running out. Packing List 1 piece of panel data logger with Built-in Li-ion Battery 1 piece of UIFuser manual 1 piece of eg: MHT-P16 Bluetooth Printer (Optional) The data logger has a built-in expandable list of printer names and automatically connects to the printers in the list via the Bluetooth "ESC" protocol. With the help of the developer, additional bluetooth printers can be supported by upgrading the list of printer names. 5 Factory Default Parameters Temperature unit: °C Export file type: PDF Time zone: UTC +8:00 Report language: English Start mode: start by pressing key Start delay: 0 min Stop mode: stop by pressing key Temperature offset value: ±0.0°C Temperature upper limit: W116B:70.0°C; W116C:100°C Temperature lower limit: W116B: -40.0°C; W116C:-200°C Normal record interval: 1min Overlimit record interval: 30s Circular log: enabled Multiple start: enabled Long press keys to delete data: enabled Reset record after finishing configuration: disabled LCD always on: timing off Alarm setting: no alarm Trip No.: XC000000 Trip description: NULL * Long press:hold the key for no less than 4s. Haswill Electronics & Haswell Trade https://www.thermo-hygro.com tech@thermo-hygro.com Copyright Haswill-Haswell All Rights Reserved 6Adobe PDF library 10.01