Installation Guide for tp-link models including: EAP7201.0, EAP610 4.0, EAP613 2.0, EAP7201.0 Omada Ceiling Mount Access Point, Omada Ceiling Mount Access Point, Ceiling Mount Access Point, Mount Access Point, Access Point
EAP7201.0 & EAP610 4.0 & EAP613 2.0 Installation Guide | Omada Network Support BookmarksCopy LinkFeedback
Safety Information. • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, ...
File Info : application/pdf, 2 Pages, 1.22MB
DocumentDocumentPackage Contents Quick Installation Guide Ceiling Mount Access Point 1× 1× (Only for certain models) Quick Installation Guide 1× 1× Scan for EAP Start Guide Note: EAP720 is used as an example throughout the guide. Images may differ from your actual product. ©2025 TP-Link 7100000323 REV1.1.0 Installation 4× 4× 4× 2× 4× 2× 4× 4× OR 2× 2× 2× Note: Accessories may vary by region and model. Option 1 Ceiling Mounting (on a Tile) Option 2 Ceiling Mounting (on a T-bar) Option 3 Wall Mounting Option 4 Junction Box Mounting Option 1 Option 2 1× 4× 4× 4× 1 1× 2× 4× 2× 1 1× 25 mm (63/64 in) 2 A 1 4× 4 mm (5/32 in) 2 3 4 5 1 2 2 3 4 60 mm Or 83 mm 5 6 1 2 1 2 Option 3 Option 4 1× 4× 4× 1 A 1 4× 7.6 mm (19/64 in) 2 2 3 OR OR 1× 2× 2× 2× Choose the accessory screws that fit your junction box. Compatible wall junctions are as follows: For simplicity, an 86 mm wall junction box is used as an example. 1 2 4 Or Cable through wall 5 2 Cable along wall 1 3 1 2 Power On Option 1: Via PoE Switch PoE Switch ETH PoE Port Option 2: Via Power Adapter Power Adapter Power Port Configuration Option 1: Standalone Mode Configure and manage each EAP on its standalone page. Option 2: Controller Mode Configure and manage EAPs (and other Omada devices) centrally with an Omada Controller. Gateway/Router Switch Scan for Standalone Start Guide Gateway/Router Switch Cloud-Based Controller Or Controller On-Premises Controller Scan for Controller Start Guide EAP EAP EAP EAP EAP EAP Omada App With the TP-Link Omada app, you can access and manage your Omada devices at a local site or remotely with a tap of your phone. Scan for Omada App Safety Information · Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. · Do not use the device where wireless devices are not allowed. · The EAP can be powered only by a power adapter or a PSE device (such as a PoE switch) which complies with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1. For models with adapters: · Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended. · Adapter shall be installed near the equipment and shall be easily accessible. TP-Link hereby declares that the Access Point is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU, and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/ TP-Link hereby declares that the Access Point is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/ More Configurations For more configurations, refer to the User Guides of the Omada Controller and Omada Access Points at: https://support.omadanetworks.com/document/ More Resources Main Site Video Center Documents Product Support Technical Support https://www.omadanetworks.com/ https://support.omadanetworks.com/video/ https://support.omadanetworks.com/document/ https://support.omadanetworks.com/product/ https://support.omadanetworks.com/contact-support/ Warranty For details on the warranty period, policy, and procedures, visit https://support.omadanetworks.com/warranty-services/. Support For technical support, user guides, and other information, please visit https://support.omadanetworks.com/, or simply scan the QR code.