Redmi 13C 5G Quick Start Guide

Welcome & Initial Setup

Thank you for choosing the Redmi 13C 5G.

To turn on the device, long press the power button. Follow the on-screen instructions to configure the device.

For more information, visit the official website: www.mi.com/global/service/userguide.

Device Overview

The Redmi 13C 5G features:

• A display screen.
• Volume Buttons on the side.
• A Power Button on the side.
• A USB Type-C Port at the bottom.
• A SIM tray slot, typically accommodating Nano-SIM cards and a Micro SD card.

To view the full user guide, scan the QR code provided.

SIM Card Information

Please do not insert non-standard SIM cards into the SIM card slot, as they may damage it.

WARNING: Do not disassemble this device.

Disposal & Recycling (WEEE)

Special precautions must be taken to safely dispose of this product. This marking indicates that this product should not be discarded with other household waste in the EU.

To prevent harm to the environment or human health from inappropriate waste disposal and to promote sustainable reuse of material resources, please recycle responsibly. Use return and collection systems or contact the retailer where the device was originally purchased.

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, electric shock, or damage the device.
• The device's operating temperature range is 0°C to 40°C. Using it outside this range may damage the device.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damage.
• Charge the device only with the included or authorized cable and power adapter. Use only authorized accessories compatible with your device.
• After charging, disconnect the adapter from the device and the power outlet. Do not charge the device for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Mishandling can cause fire or explosion. Dispose of or recycle the device, battery, and accessories according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short circuit the battery, as this may cause overheating, burns, or injury.
• Do not place the battery in high-temperature environments, as overheating may cause explosion.
• Do not disassemble, hit, or crush the battery, as this may cause it to leak, overheat, or explode.
• Do not burn the battery, as this may cause fire or explosion.
• Users shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center.
• Keep your device dry.
• Do not attempt self-repair. Contact Mi customer support or an authorized repair center if any part does not work properly.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment (e.g., fueling areas, below decks on boats, fuel/chemical transfer/storage facilities, or areas with chemicals/dust). Obey signs to turn off wireless devices. Turn off your phone in blasting areas or areas requiring "two-way radios" or "electronic devices" to be turned off.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital rules and regulations. If you have a medical device, consult your doctor and the manufacturer to determine if your phone may interfere with its operation. To avoid potential interference with a pacemaker, maintain a minimum distance of 15 cm between your phone and the pacemaker. Use the phone on the ear opposite your pacemaker and do not carry it in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving, use your phone in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not make calls while charging.
• Do not use your phone in places with high humidity, such as bathrooms, as this may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone's operating system using the built-in software update feature, or visit an authorized service outlet. Updating software through other means may damage the device or result in data loss or security issues.

EU Regulations & Compliance

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi (Model: 23124RN87G) complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification.

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk: limit 2.0W/kg) as specified by Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, the device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions simulating RF exposure during use against the head (no separation) and near the body (5 mm separation).

SAR compliance for body operation is based on a 5 mm separation distance between the unit and the human body. The device should be carried at least 5 mm away from the body to ensure RF exposure levels are compliant. When attaching the device near the body, use a belt clip or holster without metallic components, maintaining at least 5 mm separation. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and such accessories should be avoided.

Certification Information (Highest SAR)

This radio communication equipment has a specific absorption rate (SAR) of 0.979 W/kg, which complies with the Safety Standard for the Use of Radio communication Equipment on Human Health announced by the National Telecommunications Commission.

Legal Information

This device may be operated in all EU member states. Observe national and local regulations where the device is used.

This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in the following countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Wi-Fi and Frequency Bands

Wi-Fi connectivity may vary based on regional availability and local network support. Functions may be added via Over-The-Air (OTA) updates.

2.4 GHz Band Restriction: Norway: This restriction does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Ensure power adapters comply with applicable country regulations and international/regional safety standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA band 1/8: 25.7 dBm
• LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
• 5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR band n77/n78: 29 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10m

5G connection depends on country, carrier, and user environment.

E-label

Access certification information via Settings > About phone > Certification, or by searching "Certification" in Settings.

NBTC

This telecommunication equipment and device conform to the requirements of NBTC.

Disclaimer & Manufacturer Information

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Xiaomi may make improvements and changes to this user guide due to typographical errors, inaccuracies, or program/equipment improvements at any time without notice. Such changes will be incorporated into new online editions of the user guide (details at www.mi.com/global/service/userguide). All illustrations are for reference purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: Redmi

Model: 23124RN87G

© Xiaomi Inc. All rights reserved.