Instruction Manual for everwell models including: SK-5 Relay and Hard Start Capacitor, SK-5, Relay and Hard Start Capacitor, Hard Start Capacitor, Start Capacitor

SK-5

P/N: SK-5 - dev.everwellparts.com

P/N: SK-5 Relay and Hard Start Capacitor Increases Compressor Torque 300% This product can be used on all PSC single phase, 115V thru 230VAC. Air Conditioning Units from 4,000BTU to 120,000BTU (1/2 thru 5HP)

SK-5

Installation Instruction: Connect the two wires from SK-5 in parallel with the run capacitor (one wire each) without removing any original wire. Use special "Piggy Black" terminal of the SK-5 if all the capacitor terminals are being used. INSTALL ONLY ON PSC UNITS EQUIPPED WITH RUN CAPACITOR.

Installation Data

SK-5 – 1/2-5HP 115/230V 300% Hard Start Kit for A/C Compressor – Everwell Parts, Inc.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 402.60KB

Document Document

P/N: SK-5
Relay and Hard Start Capacitor Increases Compressor Torque 300%
This product can be used on all PSC single phase, 115V thru 230VAC. Air Conditioning Units from 4,000BTU to 120,000BTU (1/2 thru 5HP)
Installation Instruction:
Connect the two wires from SK-5 in parallel with the run capacitor (one wire each) without removing any original wire. Use special "Piggy Black" terminal of the SK-5 if all the capacitor terminals are being used. INSTALL ONLY ON PSC UNITS EQUIPPED WITH RUN CAPACITOR.