Minew Official Website | IoT Devices Manufacturer
IoT Device Shop: BLE Beacon, Bluetooth LoRa Gateway SensorMinew Official Website | IoT Devices Manufacturer
Instruction Manual for MINEW models including: 2ABU6-MBS01, 2ABU6MBS01, MBS01 Pallet Beacon, MBS01, Pallet Beacon, Beacon
Shenzhen Minew Technologies Co., Ltd. MBS01 2ABU6-MBS01 2ABU6MBS01 mbs01
File Info : application/pdf, 6 Pages, 469.72KB
DocumentDocumentBrief Introduction MBS01 with nRF52 series chip and supporting BLE 5.0 protocol is a low-consumption beacon for trailer tracking; it is easily installed on the trailer or forklifts due to its special design; Besides, based on the indoor positioning technology, the product can help industries including factory manufacturing and warehouse management to achieve digital and visual management on assets. Key Features BLE 5.0 & nRF52 Series 40 Months of Service Life Accidental Shutdown Prevention Ik08 Shockproof IP65 Waterproof & Dustproof 100m Broadcasting Distance Market Applications Smart Warehouse Management Smart Industrial Manufacturing Device Specifications Basic Parameters Item Value Material ABS Color Black/Grey Protection IP65IK08 DimensionsL*W*H 116.1*25.2*9.2mm Net Weight 19g Battery 1 pc CR series battery pack 2 pcs units included Battery Lifetime 40 Months Chip Model nRF52 series Bluetooth Standard BLE 5.0 Bluetooth Protocol iBeacon & Eddystone Configuration App BeaconSET + Remarks Null Optional Null Null Battery included 440mAh total capacity by default Null Null Null Null Sensors No Null NFC No Null LED No Null OTA No Null Operating Temperature -20~60 Null Default Broadcasting Parameters(BeaconPlus Firmware) Type iBeacon (On) UID (Off) URL (Off) TLM (Off) INFO (On) Sensor (Off) Password Connectable Item UUID (16bytes) Major (2bytes) Minor (2bytes) Measured power Tx power Interval (ms) Instance ID Namespace ID Measured power Tx power Interval (ms) URL Measured power Tx power Interval (ms) Electricity mV PDU packets Boot-time Measured power Tx power Interval (ms) Device Name Electricity MAC Address Measured power Tx power Interval (ms) Sensor data minew123 Yes Default Settings E2C56DB5-DFFB-48D2-B060-D0F5A71 096E0 0 0 -59dBm (0xC5) 0dBm 2000ms Random Random -24dBm (0xE8) 0dBm 2000ms http://www.minew.com/ -24dBm (0xE8) 0dBm 2000ms By default By default By default -24dBm (0xE8) 0dBm 4000ms MBS01 By default Factory setting -24dBm (0xE8) -8dBm 4000ms No By default It is configuration mode Compatibility Systems Support iOS 10.0 and above Android 4.3 and above Product Appearance Version Support iPhone 6/6Plus/6S/6S Plus, iPhone 7/7Plus, iPhone8/8 Plus, iPhone x/xr/xs/xs max, iPhone 11/11 pro/11 pro max, iPad mini/mini2/4/Air/Pro, etc. SAMSUNG, MIUI, HUAWEI, ONEPLUS, VIVO, OPPO, etc. Installations Methods: Double-side adhesive tape & Screw installation Details: Double-side adhesive notes: Recommended Installation Environment: The material surface should be Aluminum, galvanized steel, enamel steel, stainless steel, ceramic, glass/epoxy resin, acrylic, PBT, ABS, PC, hard PVC, etc. Temperature Range: 10 ~ 75 Best Temperature: 21 ~ 38, use in a low-temperature Requirements: No dust on the material surface and clean it before installation. Before pasting, increasing the viscosity with a hairdryer, or sticking it over half-hours at a reasonable temperature and then pressing for 2 seconds and repeat for better stability. Screw installation notes: Recommended Installation Environment: Screws installation should be considered on the wooden pallet, iron shelf, etc. Temperature Range: -20 ~ 60 Detail Steps: First Step: drill screw holes on the surface of a hard surface to be installed. Second: put the green expansion plug into the screw holes on the hard surface to be installed. The Last: put the screws into the green expansion plug, and install the product in the direction of screw holes. Notes: the diameter of screws hole is 6mm; the installation above is only as a reference; users should install the product according to the actual situation. Cautions The product is designed with no button and switched on when shipping for avoiding the false trigger, and it also cannot be switched off by configuration app until the battery is exhausted. In a humid environment, the product needs to be installed according to its waterproof grade, and should avoid soaking for a long-time. BLE beacons should be installed away from obstacles and corners. It is not recommended users turn on all broadcasting frames for a long service life. It would be damaged by using over the normal operating temperature. Please avoid the direct sunshine so that damages the shell and affects the shockproof grade. The Minew group will not be responsible for the damage or injury by illegally dissembling the main body. Product Package Items Inner Box (Battery excluded) Outer Box (Battery excluded) Package Picture Quantity Net Weight Gross Weight Dimensions 36 Pcs/box 684g/box 762g/box 30.5 x 11 x 7.2 cm Certifications 360 Pcs/box 6.84kg/box 8.1kg/box 32 x 23.5 x 40 cm FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance co uld void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructi ons, may cause harmful interference to radio communications. However, there is no guarantee th at interference will not occur in a particular installation. If this equipment does cause harmful int erference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is con nected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ ment. This equipment should be installed and operated with minimum distance 20cm between t he radiator & your body. Quality Assurance The factory has already obtained the certification of ISO9001 Quality System. Each product has been strictly tested (testing include transmission power, sensitivity, power consumption, stability, aging, etc.). Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded). Declaration Rights Statement The contents of this manual belong to the Manufacturer of Minew Technologies Co., LTD, Shenzhen, and protected by Chinese laws and applicable international conventions related to copyright laws. The contents can be revised by the company according to the technological development without prior notice. Anyone, companies, or organizations cannot modify the contents and cite the contents of this manual without Minew's permission, otherwise, Violators will be held accountable according to law. Disclaimer Minew team reserves the right to the final explanation of the document and product differences. The Minew group is not responsible for liability of property or personal injury with the wrong operation if users develop related products without checking the technical specifications of this manual. Contact Information Manufacturer: Shenzhen Minew Technologies Co., Ltd. Phone: +86(755) 2103 8160 Email: info@minew.com Address: No.8, Qinglong Road, Longhua District, Shenzhen, China https://www.minew.com http://www.minewstore.com