User Guide for cameracd models including: Webcam
X4 WEBCAM Manual Product Brief: System Requirements Thank you for choosing our WEBCAM. This is Webcam for real-ime data transmission to PC via USB port. It has the advantages of high resoluion, fast transmission rate, beauiful appearance, easy to carry etc. Hardware requirements: and laptop computers with USB ports, Penium 200 or higher CPU
File Info : application/pdf, 2 Pages, 275.78KB
DocumentDocument2. Connect Webcam Connect camera to computer via USB interface. Tips: When using a desktop computer, highly recommend connect the camera to the back side USB port. 3. When installation is completed, you can start using. NOTE: 1. Do not use in hot, cold, dusty or humid environments. 2. Avoid touching the lens with your hands, sharp or rough objects, please use a clean and soft cloth for cleaning. 3. Try to avoid dropping the product. Severe falls may cause damage to the lens, old seals or scratched surfaces. 4. If your computer (laptop) has a built-in camera, you need to change the default camera settings. For example, change the default camera in the chatting software setting! X4 WEBCAM Manual Product Brief: Thank you for choosing our WEBCAM. This is Webcam for real-time data transmission to PC via USB port. It has the advantages of high resolution, fast transmission rate, beautiful appearance, easy to carry etc. System Requirements Hardware requirements: Desktop and laptop computers with USB ports, Pentium 200 or higher CPU Operation system: Windows XP/ VISTA/ Win7/ Win8/ Win10 Linux 2.6.24 and above/ Ubuntu Mac OS 10.6 and above/ Android5.1 and above Over 500MB available hard disk space 4GB or higher RAM memory; CPU processor 2.0GHz or higher frequency Supports Direct X VGA graphics card 1 ab 2 5 3 4 6 10 9 3 8 7 Product diagram Light Mode control button(Three modes: warm light, white light, warm white light) `a' button: Short press this button to switch the fill light mode in turn(Long press to turn off light). `b' button: Short press this button to switch the light brightness, 5 brightness modes are available(20%, 40%, 60%,80%,100%). Fill light 360 ° Omnidirectional dual MIC Status indicator 4MP Full HD camera Universal rotating base Tripod Screw Hole Adjustable universal clip / base USB Cable User Manual Product information and parameters Full HD COMS color sensor, maximum resolution is 4MP, but the real output depends on the application Interface: USB 2.0 port(Compatible USB3.0) Image focus: 50cm to infinity LED light: Warm light, white light, warm white light Status indicator: Yes Microphones: Omni Directional Microphones Specification of tripod screw hole: 1/4" standard screw hole Webcam Installation 1. Place the camera Place the camera where you want it on the computer monitor, desktop or tripod. Note: This product does not include a tripod, please purchase separately if necessary. Place on monitor to install: Open the camera mounting clip, follow the steps and methods shown in the figure to place the camera above the display, make sure the camera is securely installed.GPL Ghostscript 9.26 Adobe Illustrator CC 22.1 (Windows)