User Guide for NEXTIVITY models including: A71-JV4, A91-JV4, A71-JV4 A91-JV4 Smart Server Antenna, A71-JV4 A91-JV4, Smart Server Antenna, Server Antenna
Nextivity Incorporated A91-JV4 YETA91-JV4 YETA91JV4 a91 jv4
File Info : application/pdf, 3 Pages, 299.30KB
DocumentDocumentPRODUCT INFORMATION SMART SERVER ANTENNA M/N: A71-JV4 A91-JV4 Do not call your service provider until you have read the Quick Start Guide. If you need help, visit: www.nextivityinc.com/support/ CAUTION · Use Smart Server Antenna indoors. It should not be used outdoors. · The server antenna(s) MUST be installed to ensure a minimum of 8 in (20 cm) separation distance from persons from the human body. · These products are designed to only be used with CELFI or SHIELD family products. All the requirements of the manufacturer must be met when installing the antenna. · There are no user-serviceable parts inside. · Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. There are no user-serviceable parts inside. · This device may be operated ONLY in a fixed location for in-building use. Warranty Nextivity, Inc. provides a limited warranty for its products. For details, please refer to nextivityinc.com/warranty/. Limitation of Liability In no event shall NEXTIVITY, nor its directors, employees, agents, suppliers or End Users be liable under contract, tort, strict liability, negligence, or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by NEXTIVITY from End User with respect to the Products actually purchased and paid for. Warning E911 location information may not be provided or inaccurate for calls served by this device. Regulatory Information: US FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: · 1. This device may not cause harmful interference, and · 2. This device must accept any interference received, including interference that may cause undesired operation. Regulatory Information: Canada This device complies with Industry Canada license-exe mpt RSS standard(s). Operation is subject to the following two conditions: · This device may not cause interference, and · This device must accept any interference, including interference that may cause undesired operation of the device. FRENCH: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de li-cence. L'exploitation est autorisée aux deux conditions suivantes: · L'appareil ne doit pas produire de brouillage, et · L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Compliance Contact In the event of a regulatory compliance issue, please get in touch with Nextivity, Inc. directly. Nextivity, Inc. can be contacted at nextivityinc.com/contact. Trademark CEL-FI and Nextivity logo are trademarks of Nextivity, Inc. Patents This product is covered by Nextivity, Inc., US patents and patents pending. Please refer to http://www.nextivityinc. com for details. Copyright Copyright © 2024 by Nextivity, Inc. All rights reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with the prior written permission of Nextivity. Designed by Nextivity in California. legal_Smart Server Antenna_eng_24-0507 420N007-A71-002-01-RC U.S. Headquarters: Nextivity, Inc. 16550 West Bernardo Drive, Bldg. 5, Suite 550, San Diego, CA 92127, USA +1 858.485.9442 tel · +1 858.485.9445 fax · www.nextivityinc.com Bureau in Europe: Unit 9, Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Nextivity Singapore Pte. Ltd.: 2 Changi Business Park Avenue 1, Level 2 Suite 16, 486015 Singapore PRODUCT INFORMATION M/N: SMART SERVER ANTENNA A71-JV4 A91-JV4 Do not call your service provider until you have read the Quick Start Guide. If you need help, visit: www.nextivityinc.com/support/ CAUTION · Use Smart Server Antenna indoors. It should not be used outdoors. · The server antenna(s) MUST be installed to ensure a minimum of 8 in (20 cm) separation distance from persons from the human body. · These products are designed to only be used with CELFI or SHIELD family products. All the requirements of the manufacturer must be met when installing the antenna. · There are no user-serviceable parts inside. · Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. There are no user-serviceable parts inside. · This device may be operated ONLY in a fixed location for in-building use. Warranty Nextivity, Inc. provides a limited warranty for its products. For details, please refer to nextivityinc.com/warranty/. Limitation of Liability In no event shall NEXTIVITY, nor its directors, employees, agents, suppliers or End Users be liable under contract, tort, strict liability, negligence, or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by NEXTIVITY from End User with respect to the Products actually purchased and paid for. Warning E911 location information may not be provided or inaccurate for calls served by this device. Regulatory Information: US FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: · 1. This device may not cause harmful interference, and · 2. This device must accept any interference received, including interference that may cause undesired operation. Regulatory Information: Canada This device complies with Industry Canada license-exe mpt RSS standard(s). Operation is subject to the following two conditions: · This device may not cause interference, and · This device must accept any interference, including interference that may cause undesired operation of the device. FRENCH: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de li-cence. L'exploitation est autorisée aux deux conditions suivantes: · L'appareil ne doit pas produire de brouillage, et · L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Compliance Contact In the event of a regulatory compliance issue, please get in touch with Nextivity, Inc. directly. Nextivity, Inc. can be contacted at nextivityinc.com/contact. Trademark CEL-FI and Nextivity logo are trademarks of Nextivity, Inc. Patents This product is covered by Nextivity, Inc., US patents and patents pending. Please refer to http://www.nextivityinc. com for details. Copyright Copyright © 2024 by Nextivity, Inc. All rights reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with the prior written permission of Nextivity. Designed by Nextivity in California. legal_Smart Server Antenna_eng_24-0507 420N007-A71-002-01-RC U.S. Headquarters: Nextivity, Inc. 16550 West Bernardo Drive, Bldg. 5, Suite 550, San Diego, CA 92127, USA +1 858.485.9442 tel · +1 858.485.9445 fax · www.nextivityinc.com Bureau in Europe: Unit 9, Basepoint Business Centre, Rivermead Drive, Swindon, SN5 7EX, UK Nextivity Singapore Pte. Ltd.: 2 Changi Business Park Avenue 1, Level 2 Suite 16, 486015 Singapore FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user's body and the handset, including the antenna. IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with RF exposurerequirements, a minimum separation distance of 20cm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Ce dispositif est conforme aux normes autoriser-exemptes du Canada RSS d'industrie L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Cet équipement est conforme avec l'exposition aux radiations IC définies pour un environnement non contrôlé. L'utilisateur final doit respecter les instructions de fonctionnement spécifiques pour satisfaire la conformité aux expositions RF. Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec une autre antenne ou transmetteur.Pour se conformer aux exigences d'exposition aux radiofréquences, une distance minimale de 20 cm doit être maintenue entre le corps de l'utilisateur et le combiné, y compris l'antenne. Les pinces de ceinture, les étuis et autres accessoires similaires utilisés par cet appareil ne doivent pas contenir de composants métalliques. Les accessoires portatifs qui ne répondent pas à ces exigences peuvent ne pas se conformer aux exigences d'exposition RF et doit être évitée. Utilisez uniquement l'antenne fournie ou une antenne approuvée