Connecting your RadioLink T8S(BT) T8FB(BT) to your Apple or Android device

Visual Overview

The process involves using the RadioLink_Blue app on your smartphone. The visual aids show the RadioLink transmitter and the app interface on a phone.

Image Description: Two images are presented. The left image shows a hand holding a smartphone displaying the RadioLink_Blue app interface, with a RadioLink T8S(BT) transmitter in the foreground. The right image shows a close-up of the RadioLink T8S(BT) transmitter.

App Icon Description: An icon for the RadioLink_Blue app is displayed, featuring a purple silhouette of a radio transmitter controller.

Connection Steps

1. From the App Store, download and install the FREE RadioLink_Blue App onto your Apple or Android smartphone or device.
2. Ensure that Bluetooth is switched ON in your phone's settings.
3. Open the RadioLink_Blue App.
4. Turn ON the T8S(BT) T8FB(BT) transmitter.
5. Press the 'Connect' button, typically located in the top left corner of the App's home screen.
6. Select 'RadioLink RSSI' from the list of available Bluetooth devices.

Connection Confirmation: A screenshot of the RadioLink_Blue app's servo output graph is shown. It displays channel values, with 'RSSI' indicated as '-76', '-49', '-49', '-72' for different readings.

7. Once connected, the transmitter will start to beep. Press one of the trim buttons to confirm the connection. The transmitter will then stop beeping.
8. You can verify the connection by moving the transmitter's control sticks and observing the corresponding representative movements on the app's servo output graph.

Post-Connection Usage

After successfully connecting the app and transmitter, you can adjust various parameters and save model memories to your smartphone. These settings can then be easily recalled to your T8S(BT) T8FB(BT) transmitter when you are at your field, lake, or track.