What is vCTS.performance?
The vCTS.performance is a scalable system designed to execute tests of charging communication in combination with the CANoe Test Packages EV and EVSE. Its high charging power capability also allows for load tests and endurance tests to be carried out. This system is a joint development by EA Elektro-Automatik and Vector. The device under test can be either an electric vehicle (EV) or an electric vehicle supply equipment (EVSE). CANoe serves as the associated test automation software.
Functions
- Turnkey hardware solution for execution of conformance and interoperability tests.
- The vCTS.performance system consists of a Master Rack with up to 180 kW and optional Extension Racks, each providing up to 300 kW.
- Supports charging communication standards including CCS, MCS, NACS, GB/T, and CHAdeMO.
- Features exchangeable charging connectors for adaptation to various standards.
Overview of Advantages
- Provides comprehensive Hardware-in-the-Loop (HIL) system tests to ensure conformity and interoperability of charging communication, as well as load and endurance tests with high charging power.
- Offers scalable provision of up to 3.84 MW DC charging power, with the capability to recover energy back into the grid.
- Delivers a turnkey solution with an optimized design for executing CANoe Test Package EV and EVSE, including integration with the vTESTstudio workflow.
Application Areas
Fully automated conformance and interoperability tests are conducted on EVs or EVSEs at their full rated power. These tests are based on the CANoe Test Package EV and EVSE, adhering to the specifications of the CCS, MCS, NACS, GB/T, and CHAdeMO charging standards.
System Configuration
The vCTS.performance system is comprised of a Master Rack and optional Extension Racks. The Master Rack contains the core components, such as power supplies or a cooling unit, and a changeable connection unit that can accommodate either a cable or an inlet. Extension Racks can be added to increase the system's capacity, allowing for a total DC charging power of up to 3.84 MW.
Technical Data
| Parameter | Details |
|---|---|
| Voltage Range | 0 - 1,500 V |
| Current Range | 0 - 1,000 A (higher currents on request) |
| DC Power | Up to 3.84 MW in 60 kW steps |
| Dimensions (Master Rack) | HxWxD: 2265 mm (42 U) x 600 mm (19" rack) x 1200 mm; Weight: approx. 500 kg |
| Dimensions (Extension Rack) | HxWxD: 2260 mm (42 U) x 600 mm (19" rack) x 1200 mm; Weight: approx. 640 kg |
| Input | 380-480 V, +/- 10%, AC 3 Phase |
| Efficiency | > 96%; Active power factor correction, typical 0.99; Regenerative with energy recovery back to the grid |
For more information, visit: www.vector.com/vcts-performance
Contact Vector: www.vector.com/contact
