Miele Built-Under Dishwasher Installation Guide

Important Safety Information

• ⚠️ Risk of damage or fire hazard.
• ? Do not use a cordless screwdriver, risk of damage.
• ? Warning: Danger of being cut.
• ⚙️ Adjust door hinges evenly on both sides.
• ➡️ Screw the feet in before moving the dishwasher.
• ⚡ Check connection data.

Included Accessories

Fittings supplied depend on model. (e.g., screws, brackets)

Optional Accessories

Accessories available for separate purchase.

Required Tools

Tools required depend on model. (e.g., screwdrivers, measuring tape)

Special Installation Note: Water Drain Venting

If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented to prevent siphoning.

Installation Steps

1. Position the dishwasher into the cabinet opening.
2. Attach mounting brackets to the appliance.
3. Secure the dishwasher to the cabinet side using provided screws.
4. Connect the water inlet hose to the appliance's water inlet.
5. Connect the drain hose to the household drainage system.
6. Connect the electrical power supply according to local regulations.
7. Slide the dishwasher into its final position under the countertop.
8. Secure the appliance to the countertop or adjacent cabinets using screws.
9. Adjust the leveling feet to ensure the dishwasher is stable and level.
10. Verify secure attachment points for the appliance.
11. Attach the kickplate or base panel at the bottom front of the appliance.
12. Detail showing a specific securing bracket and screw placement.
13. Adjust the door hinges and spring tension for proper door operation.
14. Detail showing a specific securing bracket and screw placement.
15. Attach any handles or decorative trim pieces.
16. Confirm the appliance is correctly positioned and stable.
17. Detail showing the water connection point.
18. Secure the dishwasher to the side of a cabinet for stability.
19. Detail showing the adjustment mechanism for door springs.
20. Attach a front panel or decorative door element.
21. Detail showing the connection of the drain hose to the plumbing.
22. The dishwasher is shown fully installed in its final location.
23. Secure the appliance to the underside of the countertop.
24. Final adjustment of the leveling feet for stability.
25. Test the appliance's operational functions.
26. The dishwasher is shown with its door closed.
27. The dishwasher is ready for use.
28. The dishwasher is fully installed and operational.