FLKM 50/D37SUB/M/HC3/AIO - Passive Module
Item number: 2900176
Manufacturer: Phoenix Contact
Product page: https://www.phoenixcontact.com/gb/products/2900176
Product Overview
16-channel module designed for Honeywell C300 modules. The module is controlled by the control system via a 37-pos. D-SUB or 50-pos. FLK connector. Screw connections are provided for field wiring. The module width is 113 mm.
Note: Data shown is generated from the online catalog. Please refer to user documentation for complete data. General terms of use for downloads are valid.
Commercial Data
| Item Number | 2900176 |
|---|---|
| Packing Unit | 1 pc |
| Minimum Order Quantity | 1 pc |
| Sales Key | DK2A8H |
| Product Key | DK2A8H |
| GTIN | 4046356492126 |
| Weight per piece (including packing) | 304.5 g |
| Weight per piece (excluding packing) | 304.5 g |
| Customs Tariff Number | 85369010 |
| Country of Origin | DE |
Technical Data
Product Properties
| Product Type | Interface module |
|---|---|
| No. of Channels | 16 |
Insulation Characteristics: Air Clearances and Creepage Distances
| Insulation | Functional Insulation |
|---|---|
| Overvoltage Category | II |
| Pollution Degree | 2 |
Electrical Properties
| Operating Voltage (DC) | ≤ 50 V DC |
|---|---|
| Current (per branch) | ≤ 0.5 A |
Air Clearances and Creepage Distances
| Rated Insulation Voltage | 50 V |
|---|---|
| Rated Surge Voltage | 0.5 kV (1.2 / 50 µs) |
Supported Controllers
HONEYWELL Experion PKS C300/C-Series
| Suitable I/O Card | TAIX01 (non-redundant) |
|---|---|
| TAIX11 (redundant) |
Connection Data
Connection 1 (Control Level)
| Connection in Acc. with Standard | IEC 60807-2 |
|---|---|
| Connection Method | D-SUB pin strip |
| Screw Thread | UNC 4-40 |
| Number of Connections | 1 |
| Number of Positions | 37 |
| Insertion/Withdrawal Cycles | >500 |
| Pitch | 2.77 mm |
Connection 2 (Control Level)
| Connection in Acc. with Standard | IEC 60603-13 |
|---|---|
| Connection Method | IDC/FLK pin strip |
| Number of Connections | 1 |
| Number of Positions | 50 |
| Insertion/Withdrawal Cycles | >50 |
| Pitch | 2.54 mm |
Connection 3 (Field Level)
| Connection Method | Screw connection |
|---|---|
| Stripping Length | 7 mm |
| Screw Thread | M3 |
| Number of Positions | 48 |
| Conductor Cross Section Rigid | 0.2 mm² ... 4 mm² |
| Conductor Cross-section Rigid (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² |
| Conductor Cross Section Flexible | 0.2 mm² ... 2.5 mm² |
| 0.25 mm² ... 2.5 mm² (Ferrule without plastic sleeve) | |
| 0.25 mm² ... 2.5 mm² (Ferrule with plastic sleeve) | |
| Conductor Cross Section Flexible (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² |
| 0.2 mm² ... 0.75 mm² (Ferrule without plastic sleeve) | |
| 0.5 mm² ... 0.5 mm² (TWIN ferrule with plastic sleeve) | |
| Conductor Cross Section AWG | 24 ... 12 |
| Tightening Torque | 0.5 Nm ... 0.6 Nm |
| Pitch | 5.08 mm |
Connection 4 (Supply)
| Connection Method | Screw connection |
|---|---|
| Stripping Length | 8 mm |
| Screw Thread | M3 |
| Number of Connections | 1 |
| Number of Positions | 2 |
| Conductor Cross Section Rigid | 0.2 mm² ... 4 mm² |
| Conductor Cross-section Rigid (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² |
| Conductor Cross Section Flexible | 0.2 mm² ... 2.5 mm² |
| 0.25 mm² ... 2.5 mm² (Ferrule without plastic sleeve) | |
| 0.25 mm² ... 2.5 mm² (Ferrule with plastic sleeve) | |
| Conductor Cross Section Flexible (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² |
| 0.25 mm² ... 0.75 mm² (Ferrule without plastic sleeve) | |
| 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) | |
| Conductor Cross Section AWG | 24 ... 12 |
| Tightening Torque | 0.5 Nm ... 0.6 Nm |
| Pitch | 5 mm |
Signaling
Status display present: No
Dimensions
Item Dimensions
| Width | 112 mm |
|---|---|
| Height | 89.6 mm |
| Depth | 78.9 mm |
Material Specifications
| Color | green (RAL 6021) |
|---|---|
| Housing Insulation Material | PVC |
Environmental and Real-Life Conditions
Ambient Conditions
| Degree of Protection (Module) | IP00 |
|---|---|
| Degree of Protection (Installation Location) | ≥ IP54 |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient Temperature (Storage/Transport) | -20 °C ... 70 °C |
| Altitude | ≤ 2000 m |
Standards and Regulations
Air Clearances and Creepage Distances
| Standards/Regulations | EN IEC 60664-1 |
|---|
Mounting
| Mounting Type | DIN rail mounting |
|---|---|
| Mounting Position | any |
Notes
Notes on Operation: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Classifications
ECLASS
ECLASS-13.0 27141152
ETIM
ETIM 9.0 EC002780
UNSPSC
UNSPSC 21.0 39121400
Environmental Product Compliance
EU RoHS
| Fulfills EU RoHS Substance Requirements | Yes, No exemptions |
|---|
China RoHS
| Environment Friendly Use Period (EFUP) | EFUP-E |
|---|---|
| No hazardous substances above the limits |
EU REACH SVHC
| REACH Candidate Substance (CAS No.) | No substance above 0.1 wt% |
|---|
Company Information
Phoenix Contact 2025 © - all rights reserved
Website: https://www.phoenixcontact.com
Phoenix Contact Ltd
Halesfield 13, Telford
Shropshire, TF7 4PG
01952681700
info@phoenixcontact.co.uk
File Info : application/pdf, 6 Pages, 194.51KB
DocumentDocumentReferences
iText Core 8.0.5 (production version), pdfHTML 5.0.5 (production version) ©2000-2024 Apryse Group NV,
Phoenix Contact USARelated Documents
 |
Phoenix Contact UM 45-D25SUB/S Interface Module - Technical Specifications and Data Detailed technical specifications, commercial data, dimensions, approvals, and accessory cables for the Phoenix Contact UM 45-D25SUB/S interface module. |
 |
Phoenix Contact CABLE-FCN40/4X14/ 6,0M/IM/MEL System Cable Detailed technical specifications for the Phoenix Contact CABLE-FCN40/4X14/ 6,0M/IM/MEL system cable, including electrical properties, environmental conditions, connection details, and supported controllers. |
 |
Phoenix Contact HC-BB18-I-PT-M Contact Insert - Technical Specifications and Features Detailed technical specifications, features, and compliance information for the Phoenix Contact HC-BB18-I-PT-M contact insert, including its advantages, dimensions, electrical and mechanical properties, and approvals. |
 |
PTCB E1 24DC/0.63A SI-R: Electronic Device Protection Phoenix Contact PTCB E1 24DC/0.63A SI-R is a single-channel electronic device protector for 12-24 V DC loads. Features fixed nominal current of 0.63 A, remote signaling, remote reset, and active current limitation. Designed for DIN rail mounting and compatible with CLIPLINE terminal blocks. |
 |
Phoenix Contact IB IL AO 2/U/BP-ME Analog Module Technical Data Technical specifications and product information for the Phoenix Contact IB IL AO 2/U/BP-ME Analog Module, including dimensions, electrical properties, connection data, and environmental compliance. |
 |
Phoenix Contact RAD-2400-IFS Wireless Module CCC Certificate This document contains the China Compulsory Certification (CCC) for the Phoenix Contact RAD-2400-IFS wireless module. It details the product's electrical parameters, safety certifications, and usage conditions, including its explosion-proof rating. |
 |
ST-8EP1N8A8K02S Cable Connector - Phoenix Contact Technical data, advantages, and compliance information for the Phoenix Contact ST-8EP1N8A8K02S cable connector. Features include M17 threading, IP67 protection, and crimp connection. |
 |
Phoenix Contact UM-VS 2955580 Connection Pin - Technical Data and Specifications Detailed technical specifications, commercial data, and classifications for the Phoenix Contact UM-VS 2955580 connection pin. Includes GTIN, weight, material, and RoHS compliance. |