HARLEY-DAVIDSON 76001179 Audio 50S Motorcycle Bluetooth Communication System with Mesh Intercom User Guide

User Guide for HARLEY-DAVIDSON models including: 76001179, Audio 50S Motorcycle Bluetooth Communication System with Mesh Intercom, 76001179 Audio 50S Motorcycle Bluetooth Communication System with Mesh Intercom, Motorcycle Bluetooth Communication System with Mesh Intercom, Communication System with Mesh Intercom, Mesh Intercom

USER'S GUIDE

File Info : application/pdf, 62 Pages, 16.82MB

UsersGuide Harley-Davidson Audio 50S 1.0.0 en 211014

MOTORCYCLE BLUETOOTH® COMMUNICATION SYSTEM WITH MESH INTERCOMTM

Version 1.0.0

USER'S GUIDE
ENGLISH

LEGEND:
TAP Tap button/Jog Dial the
1x specified number of times

HOLD
10s

Press and Hold button/Jog Dial for the specified amount of time

ROTATE ROTATE
L R

ROTATE

Rotate Jog Dial clockwise (right) or counterclockwise (left).

ROTATE
L

ROTATE
R

ROTATE

Rotate while Pressing Jog Dial clockwise (right) or counterclockwise (left).

"Hello"

Audible prompt

TABLE OF CONTENTS

1. ABOUT THE HARLEY-DAVIDSON AUDIO 50S

1.1 Product Details

1.1.1 Headset Main Unit

1.1.2 Universal Clamp Kit

1.2 Package Contents

2. INSTALLING THE HEADSET ON YOUR HELMET 10

2.1 Helmet Installation

2.2 Using the Glued Surface Mounting Adapter 11

2.3 Switching the Microphone

2.3.1 Wired Boom Microphone

2.3.2 Wired Microphone

2.4 Earbuds

2.5 External Mesh Intercom Antenna

3. GETTING STARTED

3.1 Button

3.2 Downloadable Software

3.2.1 SENA MOTORCYCLES App

3.2.2 Boom Audio Bluetooth Device Manager

3.3 Powering On and Off

3.4 Charging

3.5 Checking the Battery Level

3.6 Volume Adjustment

TABLE OF CONTENTS CONTINUED

4. PAIRING THE HEADSET WITH OTHER

BLUETOOTH DEVICES

4.1 Phone Pairing

4.1.1 Pairing When the Harley-Davidson Audio 50S is

Turned Off

4.1.2 Pairing When the Harley-Davidson Audio 50S is

Turned On

4.2 Pairing with the H-D WHIM Wireless

Headset Interface Module

4.3 Second Mobile Phone Pairing - Second

Mobile Phone, GPS, and SR10

4.4 Advanced Selective Pairing: Hands-Free or

A2DP Stereo

4.4.1 Phone Selective Pairing - Hands-Free Profile

4.4.2 Media Selective Pairing - A2DP Profile

4.5 GPS Pairing

5. MOBILE PHONE USAGE

5.1 Making and Answering Calls

5.2 Siri and Google Assistant

5.3 Speed Dialing

5.3.1 Assigning Speed Dial Presets

5.3.2 Using Speed Dial Presets

6. STEREO MUSIC

6.1 Playing Music with Bluetooth Devices

6.2 Playing Music with non-Bluetooth Devices

6.3 Music Sharing

TABLE OF CONTENTS CONTINUED

7. MESH INTERCOM

7.1 What is Mesh Intercom?

7.1.1 Open Mesh

7.1.2 Group Mesh

7.2 Starting Mesh Intercom

7.3 Using the Mesh in Open Mesh

7.3.1 Channel Setting (Default: channel 1)

7.4 Using Mesh in Group Mesh

7.4.1 Creating a Group Mesh

7.4.2 Joining an Existing Group Mesh

7.5 Reset Mesh

7.6 Toggling Open Mesh/Group Mesh

7.7 Enable/Disable Mic (Default: Enable)

8. BLUETOOTH INTERCOM

8.1 Intercom Pairing

8.1.1 Using the Smart Intercom Pairing (SIP)

8.1.2 Using the Button

8.2 Two-Way Intercom

8.3 Multi-Way Intercom

8.3.1 Starting a Three-Way Intercom Conference

8.3.2 Starting a Four-Way Intercom Conference

8.3.3 Ending Multi-Way Intercom

8.4 Three-Way Conference Phone Call with

Intercom Users

8.5 Group Intercom

8.6 Mesh Intercom Conference with Bluetooth

Intercom Participant

TABLE OF CONTENTS CONTINUED

8.7 Universal Intercom

8.8 Mesh Intercom Conference with Two-way

Universal Intercom Participant

9. USING THE FM RADIO

9.1 FM Radio On/Off

9.2 Seek and Save Radio Stations

9.3 Scan and Save Radio Stations

9.4 Temporary Station Preset

9.5 Navigating Preset Stations

9.6 Region Selection

10. AMBIENT MODE

11. VOICE COMMAND

12. FUNCTION PRIORITY AND FIRMWARE

UPGRADES

12.1 Function Priority

12.2 Firmware Upgrades

12.2.1 Using the WiFi Adapter

12.2.2 Using the Boom Audio Bluetooth Device

Manager

13. CONFIGURATION SETTING

13.1 Headset Configuration Setting

13.1.1 Delete All Pairings

13.1.2 Remote Control Pairing

TABLE OF CONTENTS CONTINUED

13.2 Software Configuration Setting

13.2.1 Speed Dial

13.2.2 Channel Setting (Default: channel 1)

13.2.3 Headset Language

13.2.4 Audio Equalizer (Default: Music Balance)

13.2.5 VOX Phone (Default: Enable)

13.2.6 VOX Intercom (Default: Disable)

13.2.7 VOX Sensitivity (Default: 3)

13.2.8 Bluetooth Intercom Audio Multitasking

(Default: Disabled)

13.2.9 Intercom-Audio Overlay Sensitivity (Default: 3) 58

13.2.10 Audio Overlay Volume Management

(Default: Disable)

13.2.11 HD Intercom (Default: Enable)

13.2.12 HD Voice (Default: Enable)

13.2.13 Smart Volume Control (Default: Disable)

13.2.14 Sidetone (Default: Disable)

13.2.15 Voice Prompt (Default: Enable)

13.2.16 RDS AF Setting (Default: Disable)

13.2.17 FM Station Guide (Default: Enable)

13.2.18 Advanced Noise ControlTM (Default: Enable)

14. TROUBLESHOOTING

14.1 Fault Reset

14.2 Factory Reset

1. ABOUT THE HARLEY-DAVIDSON AUDIO 50S

1.1 Product Details
1.1.1 Headset Main Unit
Mesh Intercom Antenna

Mesh Intercom Button Status LED
Bluetooth Antenna

Phone Button

Jog Dial

DC Power Charging & Firmware Upgrade Port
1.1.2 Universal Clamp Kit
Earbud Port Static Boom Microphone

Quick Release Button

Speakers

MP3 Port Ambient Mode Button

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 8

1 ABOUT THE HARLEY-DAVIDSON AUDIO 50S
1.2 Package Contents

Headset Main Unit

Universal Helmet Clamp

Wired Boom Microphone

Wired Microphone

Hook and Loop Hook and Loop

Fastener for

Boom Microphone Wired Microphone

Microphone Sponges

Glued Surface Mounting Adapter

Speaker Pads

Hook and Loop Fasteners for Speakers

Boom Microphone
Holder

Hook and Loop Fastener for Holder

2.5 to 3.5 mm Audio Cable

Rubber Pads

Allen Wrench

Speaker Port Cover

WiFi Adapter
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 9

2. INSTALLING THE HEADSET ON YOUR HELMET
2.1 Helmet Installation
To securely install the headset on the helmet, please follow this procedure. 1. Insert the back plate of the clamp unit between the internal padding
and the external shell of the helmet, and tighten the two screws.
Allen Wrench
Clamp Unit
Note: Depending on the size and shape of your helmet, you may need to change the thickness of the rubber pad between the clamp plates using the two extra rubber pads in the box. To increase the overall thickness, attach the thinner one to the original rubber pad or replace the original rubber pad with the thicker one.
2. Place the helmet speakers along with the hook and loop fasteners, centered to your ear, in the ear pockets of the helmet. If the helmet has deep ear pockets, you can use the speaker pads to place the speakers closer to your ears.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 10

2 INSTALLING THE HEADSET ON YOUR HELMET
Note: Make sure that the microphone is located properly close to your mouth when you wear the helmet.
3. Attach the headset main unit to the clamp unit. Slide the main unit down onto the clamp unit until it clicks firmly into the bottom portion of the clamp unit.
4. To remove the main unit from the clamp unit, press the Quick Release Button to slide it off the clamp unit.
2.2 Using the Glued Surface Mounting Adapter
If you have any problem equipping the clamp unit on the helmet for any reason, you may use the glued surface mounting adapter to attach the clamp unit on the external surface of the helmet. 1. Remove the speaker unit.
1 2
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 11

2 INSTALLING THE HEADSET ON YOUR HELMET
2. Remove the back plate.
3. Remove the rubber pad and replace it with the thicker rubber pad included in the package.
4. Hook on the adapter to the clamp unit then screw in the glued external adapter to the clamp unit.
5. Reconnect the speaker cable to the speaker port.
2 1
6. Locate a proper surface on the helmet to attach the unit then clean the helmet surface location with a moistened towel and allow to dry thoroughly.
7. Peel off the cover of the adhesive tape of the adapter and attach the unit on the proper surface of your helmet.
Caution: Harley-Davidson recommends using the clamp unit. The glued surface mounting plate is provided for convenience, but is not the recommended mounting method. Harley-Davidson is not responsible for its use.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 12

2 INSTALLING THE HEADSET ON YOUR HELMET
2.3 Switching the Microphone
If you want to use a different microphone instead of the static boom microphone, please refer to the following steps. 1. Remove the back plate of the clamp unit. 2. Connect the microphone according to your helmet type. 3. Lock the microphone to the clamp. 4. Reattach the back plate to cover the microphone and the speaker
port.
Speaker Port
Microphone Port
2.3.1 Wired Boom Microphone
When installing the included wired boom microphone, place the hook and loop fastener at the end of the boom microphone between the internal helmet cheek pad and the internal wall of the helmet shell. The boom microphone should be mounted so it is facing close to your mouth when you wear the helmet.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 13

2 INSTALLING THE HEADSET ON YOUR HELMET
2.3.2 Wired Microphone
In case of the wired microphone, attach the enclosed hook and loop fastener for the wired microphone to the inside of the chin guard for full-face helmets. Place the wired microphone on the hook and loop fastener and connect it to the connector of the clamp unit.
2.4 Earbuds
You can connect your earbuds to the clamp while having the speakers connected to the clamp. The sound of the earbuds will be active while the sound of the outer speakers becomes inactive.
Earbud Port
2.5 External Mesh Intercom Antenna
Pull the Mesh Intercom Antenna outwards slightly to unfold it.
1 2
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 14

3. GETTING STARTED
3.1 Button

M Mesh Intercom Button

P
Phone Button
Jog Dial
A Ambient Mode Button
3.2 Downloadable Software
3.2.1 SENA MOTORCYCLES App
By simply pairing your phone with your headset, you can use the SENA MOTORCYCLES App for quicker, easier set up and management.
SENA MOTORCYCLES · Device configuration setting
· Download the SENA MOTORCYCLES App on Google Play Store or App Store.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 15

3 GETTING STARTED

3.2.2 Boom Audio Bluetooth Device Manager
The Boom Audio Bluetooth Device Manager allows you to upgrade firmware and configure settings directly from your PC.
Boom Audio Bluetooth Device Manager
· Download the Boom Audio Bluetooth Device Manager at oem.sena.com/harley-davidson.

3.3 Powering On and Off

Press and hold the Jog Dial and Phone Button at the same time to turn the headset on or off.

Powering On

Powering Off

HOLD
1s

TAP
1x

3.4 Charging

Charging the Headset
DC Power Charging & Firmware Upgrade Port

You can charge the headset by connecting the WiFi Adapter or a USB Power & Data Cable (USB-C).
A USB Power & Data Cable (USB-C) is not included in the package.

The headset will be fully charged in about 1 hour. (The charging time may vary depending on the charging method.)
Note: · The headset includes a Fast Charging feature which allows it to
charge quickly over a short period of time. For example, a user can get up to 3.5 hours of Mesh communication or 6 hours of Bluetooth intercom after charging the headset for 20 minutes.
· Any 3rd party USB charger can be used with Harley-Davidson products if the charger is approved by either the FCC, CE, or IC.
· The Harley-Davidson Audio 50S is compatible with 5 V input USBcharged devices only.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 16

3 GETTING STARTED

3.5 Checking the Battery Level

Instructions are for when powering the headset on. Visual Method

HOLD
1s

=
HIGH
=
MEDIUM
=
LOW
Note: When the battery is low while in use, you will hear a voice prompt saying "Low battery".

3.6 Volume Adjustment

You can raise or lower the volume by rotating the Jog Dial clockwise or counterclockwise. Volume is set and maintained independently at different levels for each audio source (i.e., phone, intercom), even when the headset is rebooted.

Volume Up

Volume Down

ROTATE
R

ROTATE
L

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 17

4. PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time, they will need to be "paired." This enables them to recognize and communicate with one another whenever they are within range. The headset can pair with multiple Bluetooth devices such as a mobile phone, GPS, MP3 player or Sena SR10 Two-Way Radio Adapter via Mobile Phone Pairing, Second Mobile Phone Pairing and GPS Pairing. The headset can also be paired with up to three other HarleyDavidson headsets. Pairs with up to Three Harley-Davidson Headsets

Also Pairs with:

Mobile Phone

MP3 Player

GPS Devices

Sena SR10

4.1 Phone Pairing

There are two ways to pair the phone.

4.1.1 Pairing When the Harley-Davidson Audio 50S is Turned Off

1. Press and hold the Phone Button and Jog Dial for 3 seconds when the Harley-Davidson Audio 50S is turned off.
Phone Pairing

HOLD
3s

"Phone Pairing"

Alternating blue and now discoverable.

red

flashing

lights

indicate

device

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 18

4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES

2. With your mobile phone in Bluetooth-pairing mode, select H-D Audio 50S in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
=
PIN NUMBER

4.1.2 Pairing When the Harley-Davidson Audio 50S is Turned On

1. Press and hold the Phone Button for 5 seconds when the HarleyDavidson Audio 50S is on.
Phone Pairing

HOLD
5s

"Phone Pairing"

Alternating blue and now discoverable.

red

flashing

lights

indicate

device

2. With your mobile phone in Bluetooth-pairing mode, select H-D Audio 50S in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.

=
PIN NUMBER

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 19

4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.2 Pairing with the H-D WHIM Wireless Headset Interface Module
The H-D WHIM built-in Boom! Box is a Wireless Headset Interface for group communication. You can pair the headset with an H-D WHIM built-in Boom! Box by mobile phone pairing.
1. Press and hold the Phone Button for 5 seconds and you will hear a voice prompt, "Phone pairing".
2. Turn on the Boom! Box system and follow the "Wireless Headset Setup" procedure to complete the process. Please refer to the Boom! Box Owner's Manual for details.
3. When the pairing is completed, you will hear a voice prompt, "Your headset is paired".
4. If the pairing process is not completed within three minutes, the headset will return to stand-by mode.
The H-D WHIM built-in Boom! Box can be connected to the rider and the passenger's headset. Also, the H-D WHIM built-in Boom! Box can be connected to the rider's mobile phone. The rider's headset should be paired first followed by the passenger's. Please refer to the Boom! Box Owner's Manual for details. You can listen to music, answer a mobile call, and have an intercom conversation via the H-D WHIM builtin Boom! Box for group communication as shown in the figure. Parallel Connection of H-D WHIM built-in Boom! Box and Mobile Phone by Mobile Phone Pairing

Rider Mobile Phone
Mobile Phone Pairing

Passenger Mobile Phone
Second Mobile Phone Pairing

Rider

Mobile Phone Pairing

H-D WHIM built-in Boom! Box

Mobile Phone Pairing

Passenger

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 20

4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES

4.3 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10

1. Execute Second Mobile Phone Pairing. Second Mobile Phone Pairing

HOLD
5s

TAP
P 1x

"Second mobile phone pairing"

= Blue flashing light indicates device is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode, select H-D Audio 50S in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
=
PIN NUMBER

4.4 Advanced Selective Pairing: Hands-Free or A2DP Stereo
Phone Pairing allows the headset to establish two Bluetooth profiles: Hands-Free or A2DP Stereo. Advanced Selective Pairing allows the headset to separate the profiles to enable connection with two devices.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 21

4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES

4.4.1 Phone Selective Pairing - Hands-Free Profile

1. Execute Phone Selective Pairing. Phone Selective Pairing

HOLD
5s

TAP
P 1x

"Phone selective pairing"

= Blue flashing light indicates device is now discoverable.

2. With your mobile phone in Bluetooth-pairing mode, select H-D Audio 50S in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
=
PIN NUMBER

4.4.2 Media Selective Pairing - A2DP Profile

1. Execute Media Selective Pairing. Media Selective Pairing

HOLD
5s

TAP
1x

"Media selective pairing"

= Red flashing light indicates device is now discoverable.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 22

4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES

2. With your mobile phone in Bluetooth-pairing mode, select H-D Audio 50S in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
=
PIN NUMBER

4.5 GPS Pairing

1. Execute GPS Pairing. GPS Pairing

HOLD
5s

TAP
P 1x

"Second mobile phone pairing"
TAP
P 1x

"GPS pairing"

= Green flashing lights indicates device is now discoverable.
2. With your Bluetooth device on the GPS navigation screen, select H-D Audio 50S in the list of devices detected.
3. If your Bluetooth device asks for a PIN, enter 0000.
=
PIN NUMBER
Note: If you pair your GPS device via GPS Pairing, its instruction will not interrupt your Mesh Intercom conversations, but overlay with them. Bluetooth intercom conversations will be interrupted by GPS instructions.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 23

5. MOBILE PHONE USAGE

5.1 Making and Answering Calls

Answer a Call

End a Call

= P or

TAP
1x

Reject a Call

HOLD
2s

TAP
1x

HOLD
2s

Note: If you have a GPS device connected, you will not hear its voice navigations during a phone call.

5.2 Siri and Google Assistant

The Harley-Davidson Audio 50S supports the Siri and Google Assistant access directly.
You can activate the Siri or Google Assistant using the voice through the headset's microphone, a wake word will be used. This is a word or groups of words such as "Hey Siri" or "Hey Google".
Activate the Siri or Google Assistant Installed on Your Smartphone

"Hey Google" or

"Hey Siri"

TAP
P 1x

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 24

5 MOBILE PHONE USAGE

5.3 Speed Dialing

5.3.1 Assigning Speed Dial Presets
Speed Dial Presets could be assigned in the settings menu, accessible through Boom Audio Bluetooth Device Manager or SENA MOTORCYCLES App.

5.3.2 Using Speed Dial Presets

1. Enter into the Speed Dial menu. Enter Speed Dial Mode

TAP
2x

"Speed dial"

2. Navigate between the Speed Dial Preset. Navigate Forward or Backward through Speed Dial Preset Numbers

ROTATE
R

ROTATE
L

3. Call one of your Speed Dial Presets. Call a Speed Dial Preset Number

TAP
1x

"Speed dial (#)"

4. Redial the last number called. Redial Last Number

TAP
1x

"Last number redial"

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 25

6. STEREO MUSIC

6.1 Playing Music with Bluetooth Devices

1. Play or pause music. Play/Pause Music

HOLD
1s

"[Beep, Beep]"

2. Adjust the volume. Volume Up/Down

ROTATE
R

3. Track forward or back. Track Forward/Backward

ROTATE
R

ROTATE
L

6.2 Playing Music with non-Bluetooth Devices
You can play music that is stored on non-Bluetooth devices such as MP3 players. To connect your device to the headset, plug the enclosed 2.5 to 3.5 mm audio cable into the AUX ports, both on the headset and on your device.

To adjust the volume, rotate the Jog Dial clockwise or counterclockwise. You can also adjust the volume directly on the connected device.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 26

6 STEREO MUSIC

6.3 Music Sharing

You can start sharing music with one intercom friend using Bluetooth stereo music during a two-way intercom conversation and one participant of a Mesh. Both you and your intercom friend can remotely control music playback such as track forward and track back. If you start sharing music while Bluetooth intercom and Mesh Intercom are running at the same time, then music shared during Bluetooth intercom will take priority over music shared during Mesh Intercom. The Creator will send a request message to a headset connected during Mesh Intercom and will share music with the first participant that accepts the request.

Bluetooth Intercom Music Sharing

HOLD
3s

"Music sharing on"

Mesh Intercom Music Sharing [Creator]

HOLD
3s

"Music sharing on"

[Participant]
"Would you like to accept music sharing?"

TAP
1x

HOLD
1s

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 27

7. MESH INTERCOM
7.1 What is Mesh Intercom?
Mesh IntercomTM is a dynamic communication system created by Harley-Davidson that provides instant and effortless bike-to-bike communication without a pre-grouping process. Mesh Intercom allows riders to connect and communicate with nearby users without the need to pair each headset together. The working distance between each Harley-Davidson Audio 50S in Mesh Intercom can be up to 2 km (1.2 miles) in open terrain. In open terrain, the Mesh can be extended up to 8 km (5 miles) between a minimum of six users. Within the same channel in Open MeshTM or the same private group in Group MeshTM, six users can talk at the same time and enjoy the optimal quality for their conversation. Mesh Intercom
C E
A F

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 28

7 MESH INTERCOM

7.1.1 Open Mesh
Open Mesh is an open group intercom function. Users can freely communicate with each other in the same Open Mesh channel and select which channel (1-9) to use through the headset. It can connect with a virtually unlimited number of users in each channel.
C E
A F

Channel 1

Channel 2

Channel 9

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 29

7 MESH INTERCOM

7.1.2 Group Mesh

Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset. Users can freely communicate with each other in the same private group in Group Mesh.
For closed intercom conversations using Mesh Intercom, a Group Mesh needs to be created by the users. When users create a private group in Group Mesh by Mesh Grouping, the headset automatically switches from Open Mesh to Group Mesh. Up to 24 users can all be connected in each private group.

Group Mesh

7.2 Starting Mesh Intercom

When Mesh Intercom is enabled, the Harley-Davidson Audio 50S will automatically connect to nearby Harley-Davidson Audio 50S users and allow them to talk to each other by pressing the Mesh Intercom Button.

Mesh Intercom On

Mesh Intercom Off

TAP
1x

"Mesh intercom on"

"Mesh intercom off"

7.3 Using the Mesh in Open Mesh
When Mesh Intercom is enabled, the headset will be in Open Mesh (default: channel 1) initially.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 30

7 MESH INTERCOM

7.3.1 Channel Setting (Default: channel 1)

If the Open Mesh communication experiences interference because other groups are also using channel 1 (default), change the channel. You can select from channels 1 to 9.

Channel 1

Channel 2

Enter into the Channel Setting

TAP
2x

"Channel setting, 1"

Channel 9

Navigate Between Channels (1 2 ··· 8 9 Exit 1 ···)

ROTATE
R

"#"

ROTATE
L

Save the Channel

TAP
1x

"Channel is set, channel #"

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 31

7 MESH INTERCOM

Note: · Channel Setting always starts with channel 1.
· If you do not press any button for approximately 10 seconds in a specific channel, the channel is automatically saved.
· If you want to cancel during Channel Setting, tap the Phone Button.
· The channel will be remembered even if you turn off the HarleyDavidson Audio 50S.

7.4 Using Mesh in Group Mesh

7.4.1 Creating a Group Mesh

Creating a Group Mesh requires two or more Open Mesh users. Open Mesh

1. Enter into Mesh Grouping to create a Group Mesh.
C

YOU
and = M
D

HOLD
5s

FRIEND

"Mesh Grouping"

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 32

7 MESH INTERCOM

2. The headsets complete Mesh Grouping and automatically switch from Open Mesh to Group Mesh.
"Group Mesh"

Open Mesh Group Mesh

Note: · If the Mesh Grouping is not completed within 30 seconds, users
will hear a voice prompt, "Grouping failed".
· If you want to cancel during the Mesh Grouping, tap the Mesh Intercom Button or Phone Button.

7.4.2 Joining an Existing Group Mesh

One of the members in an Existing Group Mesh can allow new members in Open Mesh to join the Existing Group Mesh.

New Members

Existing Group Mesh and Current Members

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 33

7 MESH INTERCOM

1. One of the current members and a new member enter into Mesh Grouping to join the Existing Group Mesh.
C

YOU (NEW MEMBER)
and = M
E

HOLD
5s

CURRENT MEMBER IN GROUP
MESH
"Mesh Grouping"

2. The headsets complete Mesh Grouping. The new members will hear a voice prompt as their headsets automatically switch from Open Mesh to Group Mesh.
"Group Mesh"

Note: If the Mesh Grouping is not completed within 30 seconds, the current members will hear a low tone double beep and the new member will hear a voice prompt, "Grouping failed".

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 34

7 MESH INTERCOM

7.5 Reset Mesh

If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).

HOLD
8s

7.6 Toggling Open Mesh/Group Mesh

Users are able to toggle between Open Mesh and Group Mesh without resetting the Mesh. This allows users to keep the Group Mesh Network connection information while in Open Mesh.
Users can toggle to Group Mesh to communicate with participants from the stored Group Mesh Network connection information.
Toggle Between Open Mesh and Group Mesh

Open Mesh
=M

"Open Mesh"
HOLD
3s

"Group Mesh"
Group Mesh
Note: If you have never participated in Group Mesh, you cannot toggle between Open Mesh and Group Mesh. You will hear a voice prompt, "No Group Available".

7.7 Enable/Disable Mic (Default: Enable)

Users can enable/disable the microphone when communicating in a Mesh Intercom.
Enable/Disable the Microphone

HOLD
1s

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 35

8. BLUETOOTH INTERCOM
Up to three people can communicate via intercom with the headset simply by pairing their headsets. Pairing with Intercom Friends
A

8.1 Intercom Pairing
There are two ways to pair the headset.
8.1.1 Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom communication by scanning the QR code on the SENA MOTORCYCLES App without remembering the button operation. 1. Pair the mobile phone with the headset. 2. Open the SENA MOTORCYCLES App and tap
(Smart Intercom Pairing Menu). 3. Scan the QR code displayed on your friend (B)'s mobile phone.
· Your friend (B) can display the QR code on the mobile phone by tapping > QR code ( ) on the SENA MOTORCYCLES App.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 36

8 BLUETOOTH INTERCOM

4. Tap Save and check that your friend (B) is paired with you (A) correctly.
5. Tap Scan ( ) and repeat steps 3-4 to pair with Intercom Friends (C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with Harley-Davidson products that use Bluetooth 3.0 or below.

8.1.2 Using the Button
1. Press and hold the Jog Dials of two headsets for 5 seconds until you hear a voice prompt, "Intercom pairing". Pairing Headset A with Headset B
A

YOU
and =
B

HOLD
5s

"Intercom pairing" = Red flashing light indicates device is now discoverable.

The Harley-Davidson Audio 50S will automatically pair with a HarleyDavidson headset.
= Flashing blue LED confirms intercoms are paired.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 37

8 BLUETOOTH INTERCOM

2. Repeat step 1 to pair with Intercom Friends C & D. Last-Come, First-Served

YOU

Intercom Friend 1

YOU

Intercom Intercom Friend 1 Friend 2

YOU

Intercom Intercom Intercom Friend 1 Friend 2 Friend 3

8.2 Two-Way Intercom

You can start or end an intercom conversation with an Intercom Friend by tapping the Jog Dial.

1. Tap once for Intercom Friend 1.

Start/End with Intercom Friend 1

D
=

TAP
1x

2. Tap twice for Intercom Friend 2.

Start/End with Intercom Friend 2

C
=

TAP
2x

3. Tap three times for Intercom Friend 3.

Start/End with Intercom Friend 3

B
=

TAP
3x

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 38

8 BLUETOOTH INTERCOM

8.3 Multi-Way Intercom
Multi-Way Intercom enables conference-call-style conversations with up to three Intercom Friends at the same time. While MultiWay Intercom is in progress, mobile phone connection is temporarily disconnected. However, as soon as Multi-Way Intercom terminates, the mobile phone connection will be reestablished.

8.3.1 Starting a Three-Way Intercom Conference
You (A) can have a Three-Way Intercom Conference with two other Intercom Friends (B & C) by establishing two intercom connections simultaneously. 1. Pair your headset (A) with those of two other Intercom Friends (B & C).
Pair with Intercom Friends B & C
A

YOU

Intercom Friend B

Intercom Friend C

2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the Intercom Friend (B). Or, Intercom Friend (B) may start an intercom call with you (A).
Starting an Intercom Conversation with Intercom Friend B
A

YOU

Intercom Friend B

Intercom Friend C

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 39

8 BLUETOOTH INTERCOM

3. Then, you (A) can call the second Intercom Friend (C), or the second Intercom Friend (C) may join the intercom by making an intercom call to you (A).
Starting an Intercom Conversation with Intercom Friend C
A

YOU

Intercom Friend B

Intercom Friend C

4. Now you (A) and two Intercom Friends (B & C) are having a ThreeWay Intercom Conference. Three-Way Intercom
A

YOU

Intercom Friend B

Intercom Friend C

8.3.2 Starting a Four-Way Intercom Conference

With three Intercom Friends connected, a new participant (D) can make it a Four-Way Intercom Conference by making an intercom call to either (B) or (C).

Starting a Four-Way Intercom

B
Intercom Friend B

YOU

Intercom Friend C

D
Intercom Friend C

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 40

8 BLUETOOTH INTERCOM

8.3.3 Ending Multi-Way Intercom
1. Press and hold the Jog Dial for 1 second until you hear a beep to terminate all intercom connections.
2. Tap the Jog Dial to disconnect from your first Intercom Friend. Double tap the Jog Dial to disconnect from your second Intercom Friend.

8.4 Three-Way Conference Phone Call with Intercom Users

You can have a Three-Way Conference Phone Call by adding an Intercom Friend to the mobile phone conversation.
1. During a mobile phone call, tap the Jog Dial once, twice or, three times to invite one of your Intercom Friends to the conversation.
Invite an Intercom Friend into Phone Conference

TAP
1x

TAP
2x

TAP
3x

2. To disconnect the intercom during a conference phone call, tap the Jog Dial once, twice or three times.
Disconnect Intercom Friend from Conference

TAP
1x

TAP
2x

TAP
3x

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 41

8 BLUETOOTH INTERCOM

3. To disconnect the mobile phone call during a conference phone call, tap the Phone Button.
End Phone Call from Conference

TAP
1x

Note: When you have an incoming intercom call during a mobile phone call, you will hear high tone double beeps.

8.5 Group Intercom

Group Intercom allows you to instantly create a Multi-Way Conference Intercom with three of the most recently paired headsets.
1. Go through intercom pairing with up to three headsets you want to have Group Intercom with.
2. Press and hold the Ambient Mode Button for 1 second to begin Group Intercom. The LED will flash green and you will hear a voice prompt, "Group intercom".
Start Group Intercom

HOLD
1s

"Group intercom"
3. When all of the headsets are connected together, everyone will hear a voice prompt, "Group intercom connected."
"Group intercom connected"

= Green LED Flashing

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 42

8 BLUETOOTH INTERCOM

4. To terminate Group Intercom, press and hold the Ambient Mode Button for 1 second during Group Intercom. You will hear a voice prompt, "Group intercom terminated".
End Group Intercom

HOLD
1s

"Group intercom terminated"

8.6 Mesh Intercom Conference with Bluetooth Intercom Participant
Users can use the existing Bluetooth intercom and Mesh Intercom function at the same time. In this case, it is recommended to communicate with other Harley-Davidson headsets via Bluetooth intercom connection and use Mesh Intercom between HarleyDavidson Audio 50S headsets. A user who is in Open Mesh or Group Mesh when using Mesh Intercom is able to include up to 3 of their Bluetooth intercom friends. You can start a Two-Way Intercom conversation with one of your three Intercom Friends to include them in the Mesh.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 43

8 BLUETOOTH INTERCOM
Note: · The audio quality will be reduced if a Harley-Davidson Audio 50S
connects to 2 or more Bluetooth intercom friends while in Open Mesh or Group Mesh when using Mesh Intercom. · If a closed loop is created, as shown below, each user will experience severe noise issues. Harley-Davidson recommends that a closed loop not be created.
Harley Davidson Headset

Harley-Davidson Audio 50S

Mesh Intercom Bluetooth Intercom

· If Bluetooth intercom is accidentally turned on during Mesh Intercom communication between Harley-Davidson Audio 50S headsets, as shown below, you will hear a voice prompt, "Mesh intercom disabled, Bluetooth intercom connected" every 1 minute. If you turn off the Bluetooth Intercom or turn off the Mesh Intercom, the voice prompt will no longer come out.
Harley-Davidson Audio 50S

Harley-Davidson Audio 50S

Harley-Davidson Audio 50S
Mesh Intercom Bluetooth Intercom

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 44

8 BLUETOOTH INTERCOM

8.7 Universal Intercom

Universal Intercom allows you to have intercom conversations with users of non-Harley-Davidson Bluetooth headsets. You can pair your headset with only one non-Harley-Davidson headset at a time. The intercom distance depends on the performance of the Bluetooth headset to which it is connected. When a non-Harley-Davidson Bluetooth headset is paired with the Harley-Davidson headset, if another Bluetooth device is paired via Second Mobile Phone Pairing, it will be disconnected.
1. Execute Universal Intercom in the Headset Configuration Menu.
Access Universal Intercom in the Configuration Menu

HOLD
10s

"Configuration menu"

ROTATE
R

"Universal intercom pairing"

TAP
1x

2. Put the non-Harley-Davidson Bluetooth headset in Pairing Mode. The headset will automatically pair with a non-Harley-Davidson Bluetooth headset.
3. You can have Two-Way Intercom or Multi-Way Intercom communication with up to three Intercom Friends using non-HarleyDavidson headsets by following the procedures described below.
Example of a Three-Way Universal Intercom

YOU

Non-Harley-Davidson Headset

Harley-Davidson Headset

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 45

8 BLUETOOTH INTERCOM
Example of a Four-Way Universal Intercom

YOU
Non-Harley-Davidson Headset

Harley-Davidson Headset
Non-Harley-Davidson Headset

Note: Some non-Harley-Davidson headsets may not support MultiWay Universal Intercom.

8.8 Mesh Intercom Conference with Two-way Universal Intercom Participant
Users can use the existing Two-way Universal Intercom and Mesh Intercom function at the same time. In this case, it is recommended to communicate with non-Harley-Davidson headset via Two-way Universal Intercom connection and use Mesh Intercom between Harley-Davidson Audio 50S headsets.
A user who is in Open Mesh or Group Mesh when using Mesh Intercom is able to include one Universal Intercom friend. You can start a Two-way Universal Intercom conversation with your Universal Intercom Friend to include it in the Mesh.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 46

9. USING THE FM RADIO

9.1 FM Radio On/Off

FM Radio On

HOLD
1s

"FM on"

FM Radio Off

HOLD
1s

"FM off"

9.2 Seek and Save Radio Stations

The "Seek" feature searches for radio stations.

1. Search for radio stations. Seek Stations Forward

Seek Stations Backward

ROTATE
R

ROTATE
L

2. Save the current station. Enter Preset Selection Mode

HOLD
1s

"Preset (#)"

3. Navigate through the preset numbers that you want to store. Navigate Forward/Backward Through Preset Stations

ROTATE
R

ROTATE
L

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 47

9 USING THE FM RADIO

4. Save the station in the preset number you choose or delete the station from memory.

Save Station to the Preset Number

Delete Station from Memory

TAP
1x

9.3 Scan and Save Radio Stations

The "Scan" function automatically searches for radio stations, starting with the current station's frequency, then up from there.
1. Scan for stations. Start Scanning

TAP
2x

2. The Harley-Davidson tuner pauses at each station it finds for 8 seconds before moving to the next.
3. Save the current station. The station will be saved as the next preset number. Save the Current Station

TAP
1x

"Save preset (#)"

4. Stop scanning. Stop scanning

TAP
2x

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 48

9 USING THE FM RADIO

9.4 Temporary Station Preset

The Temporary Preset feature automatically finds and saves the nearest 10 radio stations without changing your existing preset stations.
1. Automatically find and save 10 stations. Temporary Stations

TAP
3x

2. The temporary preset stations will be cleared when the headset reboots.

9.5 Navigating Preset Stations

Using the methods above, up to 10 radio stations can be stored. You can navigate through the saved stations.
Navigate through Preset Stations

TAP
1x

Note: You can use the Boom Audio Bluetooth Device Manager or the SENA MOTORCYCLES App to save the preset stations.

9.6 Region Selection

You can select the proper FM frequency range for your location from the Boom Audio Bluetooth Device Manager or the SENA MOTORCYCLES App. Using the region setting, you can optimize the seek function to avoid unnecessary frequency ranges.

Region

Frequency range

Step

Worldwide

76.0 ~ 108.0 MHz

± 100 kHz

North America, South America and Australia

87.5 ~ 107.9 MHz

± 200 kHz

Asia and Europe

87.5 ~ 108.0 MHz

± 100 kHz

Japan

76.0 ~ 95.0 MHz

± 100 kHz

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 49

10. AMBIENT MODE

You can hear the ambient sound outside of your helmet by activating the Ambient Mode.
Start/Stop Ambient Mode

TAP
2x

Note: The Ambient Mode has higher priority than mobile phone, so you cannot listen to music, or have an intercom conversation if the Ambient Mode is activated.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 50

11. VOICE COMMAND

The Voice Command of the headset allows you to operate certain operations by simply using your voice. You can control the headset completely handsfree using the voice recognition. Multi-language Voice Command supports English, French, German, Spanish, Italian, Chinese, Japanese, and Russian.
Speak a Voice Command List

Mode Status

Function

Voice Command

Check battery

"Hey Sena, Check Battery"

Standby/ Bluetooth Intercom/Mesh Intercom/FM Radio/Music

Volume Up

"Hey Sena, Volume Up"

Volume Down

"Hey Sena, Volume Down"

Phone Pairing

"Hey Sena, Phone Pairing"

Bluetooth Intercom Pairing "Hey Sena, Pairing Intercom"

Start/End each Bluetooth Intercom

"Hey Sena, Intercom [one, two, three]"

Standby/ Bluetooth Intercom/FM Radio/Music

Turn on Mesh Intercom

"Hey Sena, Mesh On"

Turn off Mesh Intercom

"Hey Sena, Mesh Off"

Mesh Grouping

"Hey Sena, Mesh Grouping"

Mesh Intercom

Switch to Open Mesh Switch to Group Mesh

"Hey Sena, Open Mesh" "Hey Sena, Group Mesh"

End the Bluetooth intercom and Mesh intercom

"Hey Sena, End intercom"

Standby/ Bluetooth Intercom/Mesh Intercom

Play Music

"Hey Sena, Play Music"

Standby/ Intercom/Mesh Intercom/Music

Turn on FM radio

"Hey Sena, FM Radio On"

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 51

11 VOICE COMMAND

Mode Status

Function

Music/FM Radio

· FM - Next Preset · Music - Next Track
· FM - Previous Preset · Music - Previous Track

Music

Pause Music

FM Radio

Turn off FM Radio

Answer an Incoming Call

Ignore an Incoming Call

Voice Command
"Hey Sena, Next"
"Hey Sena, Previous" "Hey Sena, Stop Music" "Hey Sena, FM Radio Off"
"Answer" "Ignore"

Note: · You can set a language to another language by using the Headset
Language feature on the SENA MOTORCYCLES App.
· If you set a language that does not support voice commands, the voice command will works only with English commands.
· You can see the another language's voice command list on the SENA MOTORCYCLES App.
· Voice command performance may vary based on the environmental conditions including riding speed, helmet type and ambient noise. To improve the performance, minimize wind noise on the microphone by using a large microphone sponge and closing the visor.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 52

12. FUNCTION PRIORITY AND FIRMWARE UPGRADES
12.1 Function Priority
The headset prioritizes connected devices in the following order: (highest) Ambient Mode Mobile phone Mesh Intercom/Bluetooth Intercom Music sharing via Bluetooth stereo FM radio Stereo music by audio cable (lowest) Bluetooth stereo music
A lower-priority function gets interrupted by a higher-priority function. For example, stereo music will be interrupted by an Intercom Conversation; an Intercom Conversation will be interrupted by an incoming mobile phone call.
12.2 Firmware Upgrades
The headset supports firmware upgrades. There are two ways to upgrade firmware.
12.2.1 Using the WiFi Adapter
You can upgrade firmware using the WiFi Adapter. You can automatically install any available firmware updates to your headset via your wireless network. Please refer to the WiFi Adapter Quick Start Guide included in the package.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 53

12 FUNCTION PRIORITY AND FIRMWARE UPGRADES
12.2.2 Using the Boom Audio Bluetooth Device Manager
You can upgrade firmware using the Boom Audio Bluetooth Device Manager. The USB Power & Data Cable (USB-C) must be connected to your PC to upgrade firmware using the Boom Audio Bluetooth Device Manager. Note: · A USB Power & Data Cable (USB-C) is not included in the
package. · Do not connect the WiFi Adapter to your PC to use the Boom
Audio Bluetooth Device Manager. Please visit oem.sena.com/harley-davidson to check for the latest software downloads.
Click Here to Visit oem.sena.com/harley-davidson
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 54

13. CONFIGURATION SETTING

13.1 Headset Configuration Setting

Access the Configuration Menu Navigate Between Menu Options

HOLD
10s

ROTATE
R

Execute Menu Options

TAP
1x

ROTATE
L

Headset Configuration Menu

Voice Configuration Menu

Tap the Phone Button

Delete All Pairings

Execute

Remote Control Pairing

Execute

Universal Intercom Pairing

Execute

Exit

Execute

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 55

13 CONFIGURATION SETTING
13.1.1 Delete All Pairings
Delete All Bluetooth Pairing Information stored in the Bluetooth system.
13.1.2 Remote Control Pairing
You can remotely control the headset using Sena Remote Control devices (sold separately). 1. Turn on the headset and the Remote Control device. 2. Execute Remote Control Pairing. 3. Enter pairing mode in the Remote Control device. The headset will
automatically connect with the Remote Control device in pairing mode.
13.2 Software Configuration Setting
You can change the settings of the headset through the Boom Audio Bluetooth Device Manager or the SENA MOTORCYCLES App.
13.2.1 Speed Dial
Assign phone numbers for speed dialing to make a phone call quickly.
13.2.2 Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because other groups are also using the channel 1 (default), change the channel. You can select one of 1 to 9 channels.
13.2.3 Headset Language
You can select the device language. The selected language is maintained even when the headset is rebooted.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 56

13 CONFIGURATION SETTING
13.2.4 Audio Equalizer (Default: Music Balance)
Increase or decrease the decibel level of different frequency ranges of audio. · Music Balance will adjust frequency response that gives the most
natural balance between lows, mids, and highs. · Music Enhanced will lower midrange frequencies slightly. · Voice will increase midrange frequencies of the human voice and cut
environmental noise for better clarity with voice communication. · Bass Boost will increase the bass range of audio (130 Hz and below). · Treble Boost will increase the high range of audio (6 kHz and above).
13.2.5 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When you hear a ringtone for an incoming call, you can answer the phone by saying a word such as "Hello" loudly or by blowing air into the microphone. VOX phone is temporarily disabled if you are connected to intercom. If this feature is disabled, you have to tap the Jog Dial or the Phone Button to answer an incoming call.
13.2.6 VOX Intercom (Default: Disable)
If VOX Intercom is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When you want to start intercom, say a word such as "Hello" loudly or blow air into the microphone. If you start an intercom conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by tapping the Jog Dial, you have to terminate the intercom conversation manually. However, if you start the intercom by voice and end it manually by tapping the Jog Dial, you will not be able to start intercom by voice temporarily. In this case, you have to tap the Jog Dial to restart the intercom. This is to prevent repeated unintentional intercom connections by strong wind noise. After rebooting the headset, you can start the intercom by voice again.
13.2.7 VOX Sensitivity (Default: 3)
VOX sensitivity can be adjusted depending on your riding environment. Level 5 is the highest sensitivity setting and level 1 is the lowest.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 57

13 CONFIGURATION SETTING
13.2.8 Bluetooth Intercom Audio Multitasking (Default: Disabled)
Audio Multitasking (Bluetooth Intercom Audio Multitasking and Mesh Intercom Audio Multitasking) allows you to have an intercom conversation while simultaneously listening to music, FM radio, or GPS instructions. The overlaid audio is played in the background with reduced volume whenever there is an intercom conversation and will return to normal volume once the conversation is finished. The Mesh Intercom Audio Multitasking feature is always on.
Note: · For Bluetooth Intercom Audio Multitasking to work properly, you
need to power the headset off and on. Please restart the headset. · Bluetooth Intercom Audio Multitasking will be activated during
two-way intercom conversations with a headset that also supports this feature. · Some GPS devices may not support this feature. · The Audio Multitasking feature can be configured through the Intercom-Audio Overlay Sensitivity and the Audio Overlay Volume Management settings.
13.2.9 Intercom-Audio Overlay Sensitivity (Default: 3)
The music, FM radio and GPS volume will be lowered to play in the background if you talk over the intercom while the overlaid audio is playing. You can adjust the intercom sensitivity to activate this background audio mode. Level 1 has the lowest sensitivity and level 5 has the highest sensitivity.
Note: If your voice is not louder than the sensitivity of the selected level, the overlaid audio will not be lowered.
13.2.10 Audio Overlay Volume Management (Default: Disable)
The music, FM radio and GPS overlaid audio reduces in volume whenever there is an ongoing intercom conversation. If Audio Overlay Volume Management is enabled, the volume level of the overlaid audio will not be reduced during an intercom conversation.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 58

13 CONFIGURATION SETTING
13.2.11 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality to HD quality. HD Intercom will become temporarily disabled when you enter into a multi-way intercom. If this feature is disabled, the two-way intercom audio will change to normal quality.
Note: · The intercom distance of HD Intercom is relatively shorter than
that of normal intercom. · HD Intercom will become disabled temporarily when Bluetooth
Intercom Audio Multitasking is enabled.
13.2.12 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone calls. This feature increases the quality so that the audio will be crisp and clear during phone call conversations. If this feature is enabled, incoming phone calls will interrupt intercom conversations and audio from the SR10 will not be heard during intercom conversations. Three-Way Conference Phone Call with Intercom Participant will not be available if HD Voice is enabled.
Note: · Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice. · HD Voice is active only when Bluetooth Intercom Audio
Multitasking is disabled.
13.2.13 Smart Volume Control (Default: Disable)
Enabling Smart Volume Control automatically changes the level of the speaker volume based on the level of the environment noise. You can enable it by setting the sensitivity to low, medium or high.
13.2.14 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally speak at the correct level according to varying helmet noise conditions. If this feature is enabled, you can hear what you are speaking during an intercom conversation or a phone call.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 59

13 CONFIGURATION SETTING
13.2.15 Voice Prompt (Default: Enable)
You can disable voice prompts by software configuration settings, but the following voice prompts are always on. - Headset configuration settings menu, battery level indicator, speed
dial, FM radio functions
13.2.16 RDS AF Setting (Default: Disable)
Radio Data System (RDS) Alternative Frequency (AF) Setting allows a receiver to re-tune to the second frequency location when the first signal becomes too weak. With RDS AF enabled on the receiver, a radio station with more than one frequency can be used.
13.2.17 FM Station Guide (Default: Enable)
When FM Station Guide is enabled, FM station frequencies are given by voice prompts as you select preset stations. When FM Station Guide is disabled, the voice prompts on FM station frequencies will not be given as you select preset stations.
13.2.18 Advanced Noise ControlTM (Default: Enable)
When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom.
Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 60

14. TROUBLESHOOTING
Please visit support.sena.com for answers to frequently asked questions. This detailed online FAQ section deals with troubleshooting, illustrates case studies and contains tips on using the headset.
Click Here to Visit support.sena.com

14.1 Fault Reset
When the headset is not working properly, you can easily reset the unit: 1. Locate the Pinhole Fault Reset Button below on the back of the
main unit. 2. Gently insert a paperclip into the hole and tap the Pinhole Fault
Reset Button with light pressure.

TAP

FAULT RESET

3. The headset will shut down.
Note: Fault Reset will not restore the headset to factory default settings.

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 61

14 TROUBLESHOOTING

14.2 Factory Reset

To erase all of your settings and start fresh, the headset can be restored to factory default settings using the Factory Reset feature.

HOLD
10s

"Factory Reset"

= Solid red

TAP
1x

"Headset reset, good-bye"

Note: If you press the Phone Button or do not press the Jog Dial within 5 seconds, the reset attempt is canceled and the headset returns to standby mode. You will hear a voice prompt saying "Canceled".

Harley-Davidson Audio 50S Motorcycle Bluetooth Communication System | 62

References

Adobe InDesign 15.0 (Windows) Adobe PDF Library 15.0