Aldes RG ALU - D315 Balancing Damper
Product Reference: 11095814
For Circular Aluminum Ducts
Product Overview
The Aldes RG ALU - D315 is an aluminum balancing damper designed to regulate air pressure within the branches of circular aluminum ductwork systems in tertiary and collective buildings. This damper offers finer pressure adjustment than standard dampers by preventing the complete closure of a duct branch, which is particularly beneficial in Gas VMC (Ventilation Mécanique Contrôlée) systems.
Product Image Description: A cylindrical aluminum damper with a central disc and a manual adjustment handle. The damper is designed for insertion into circular air ducts.
Key Product Features
- Product Type: Balancing damper
- Material: Aluminum 1050A-H18 (formerly A5)
- Compliance: Meets DTU 68.3 requirements for Gas VMC
- Application Suitability: Suitable for installations in saline environments
- Adjustment: Manual adjustment with a plastic handle lockable by screw
- Axles: Lexan material, classified M1
- Perforated Disc: RGP type with 40% open area and Ø 5 mm holes
- Temperature Limit: Maximum operating temperature of +120°C
- Fire Classification: MO
Application and Installation
Domaines d'application (Application Areas)
- Residential collective housing
- New construction
- Renovation projects
- Tertiary sector premises
Mise en oeuvre (Installation)
- Easy Mounting: Accessories are designed for push-fit assembly (ducts are female, accessories are male).
- Sealing: Sealing should be achieved using mastic and/or perforated tape.
- Fixing: Secure the damper to the duct using self-drilling screws (4 to 6 depending on diameter).
Argumentaire référence (Reference Argument)
Application: Allows for the balancing of airflows across different branches of a collective Gas VMC duct system.
Description:
- Aluminum damper with a 315 mm diameter.
- Manual adjustment.
- Plastic handle lockable by screw, with Lexan axles classified M1.
General Data
References: 11095814
Main Material: Aluminum
Dimensional Data
References: 11095814
Dimensions for RG / RGP Aluminum Dampers:
Diameter (Ø): 315 mm
Diagram Description: A technical drawing showing the dimensions of the RG/RGP aluminum damper. Key dimensions indicated are diameter (Ø), length (L), and two other length measurements labeled 'Lp'.
