BE1036 True Wireless Earbuds

What's in the box?

• Wireless Earbuds
• Charging Case
• Eartips (S, L)
• Small Earhooks
• Type-C Cable
• User Manual

Product Diagram

The product features the following components:

• 1: LED Indicator / Microphone
• 2: MFB (Multi-Function Button) button
• 3: Charging Pin
• 4: Type-C charging port
• 5: LED Indicator (on charging case)

1. Charging

• Remove the protective film from the earbuds before first use.
• Fully charge both earbuds and the charging case before the first use.
• Use the provided USB-C cable to prevent damage.
• Ensure earbuds and the USB port are fully dry before charging.
• If the charging case battery is depleted, it enters a deep-sleep state and may not light up while charging. Continue charging for approximately 20 minutes until the case light activates.

2. LED Behavior

Earbuds Indicator:

• Flashing green: Indicates earbuds are in pairing mode.
• Off: Indicates earbuds are off or not charging.

Charging Case Battery Power Indicator (when charging earbuds):

• X1 (1-25% Power)
• X2 (25-50% Power)
• X3 (50-75% Power)
• X4 (75-100% Power)

3. How to Fit?

To ensure a secure and comfortable fit:

1. Identify the left (L) and right (R) earbuds.
2. Rotate the earbuds within your ear canal and adjust to find the best angle for a secure fit.
3. Ensure the ear tip creates a seal within the ear canal for optimal sound and noise isolation.

How to replace the earhook: Instructions for replacing earhooks are not detailed in the provided text.

4. Pairing Your Earbuds

• The earbuds will automatically turn on and start pairing when taken out of the charging case.
• On your device (e.g., smartphone), navigate to Bluetooth settings.
• Select "BE1036" from the list of available devices to connect.

Each earbud can be used independently.

Note: The earbuds will automatically connect to the last paired device when powered on.

5. Functions

Power On: Click and hold both R and L earbuds for 3 seconds.

Power Off: Click and hold both R and L earbuds for 5 seconds.

Play / Pause: Single click the MFB button on either earbud (R/L).

Next Track: Double-click the MFB button on the right earbud (R).

Previous Track: Double-click the MFB button on the left earbud (L).

Volume Up: Click and hold the MFB button on the left earbud (L).

Volume Down: Click and hold the MFB button on the right earbud (R).

Answer / Hang Up Call: Single click the MFB button on either earbud (R/L).

Reject Call: Double-click the MFB button on either earbud (R/L).

Voice Assistant: Triple-click the MFB button on either earbud (R/L).

6. Reset and Reconnecting

If you experience issues connecting the earbuds to each other or to your phone:

1. Delete the old "BE1036" connection from your device's Bluetooth settings.
2. Turn on both earbuds.
3. While the earbuds are in pairing mode, quickly click the MFB button on both earbuds 5 times.

7. Specifications