TG 1000 Dual Receiver
Digital UHF True Diversity Receiver
Features
- Two-channel UHF true diversity receiver
- Suitable for 19" rack mounting, 1 U
- Looping through the antenna signals of up to 6 receivers
- Status display (battery, transmitter type, microphone capsule)
- Browser control and monitoring via integrated web server
- Encrypted data transmission
- With integrated DANTE interface
Front View
- White OLED display
- Rotary encoder for selection and settings
- Power switch [power]
- SYNC function [sync] to transmit the frequency to a transmitter automatically
- Headphone output ? with channel selection
- Hole for mounting the antennas on the front
- 2 LED chains to display RF signal strength
- LED chain to display audio signal level
Rear View
- Removable BNC antennas
- Antenna inputs (BNC socket) with power supply for antenna amplifiers (8 Volt DC, 75 mA)
- 2 x coaxial antenna outputs
- AF output, 3-pin XLR, balanced / 3-pole jack, balanced
- Ethernet interface ? to connect PCs and laptops
- Mains connection
Applications
The TG 1000 wireless system is designed for professional use in touring applications and permanent installations, prioritizing audio quality and reliability. Key features include automatic frequency selection, encrypted data transmission, and browser control/monitoring via an integrated web server, ensuring future-proofing and flexibility for live stages and conference centers.
The integrated Ethernet interface allows seamless integration into any network (e.g., PC, Apple Macintosh, tablet PC, iPad etc.). A selection of handheld and beltpack transmitters with various microphone capsules caters to individual requirements.
The digital diversity receiver supports cascading, allowing up to 6 receivers to operate with just two antennas. An optional antenna splitter is available for larger multi-channel systems. Pre-programmed interference-free frequency groups simplify setup. These groups are scanned by pressing the rotary encoder. Carrier frequency transmission and setting to the transmitter is done via the infrared interface.
The headphone output allows individual channel monitoring. System configurations, such as headphone volume and output level, are managed via a rotary encoder (jog wheel). The OLED display provides clear visibility from all angles, showing parameters like frequency, group/channel, user name, and transmitter battery status. Separate LED chains indicate RF signal strength and audio level.
The Dante interface enables the transmission of multiple channels of uncompressed audio data with low latency over a network cable.
Versions
| Region | Description | Order # |
|---|---|---|
| Region A | Two-channel true diversity receiver, Dante, 470 - 789 MHz | 708.984 |
| Region B | Two-channel true diversity receiver, Dante, 470-608 MHz (without 608 - 614 MHz (US TV channel 37)) | 709.123 |
| Region C | Two-channel true diversity receiver, Dante, 520-694 MHz | 709.131 |
| Region D | Two-channel true diversity receiver, Dante, 470-638 MHz & 650-758 MHz | 711.381 |
| Region E | Two-channel true diversity receiver, Dante, 470-714 MHz | 709.158 |
Supplied Accessories
- Power cable
- Quick Start Guide
- 2 x WA-ATS standard omnidirectional antennas
- 1 x WA-CKF Connecting cable to mount the antennas on the front, two BNC adapters female/female, WA-CKL 60 required for use
- 1 x WA-CKL Set with two RG 58 connecting cables, 60 cm long, for cascading or antenna front mounting
Optional Accessories
Antenna splitter/Combiner
- WA-AS6/2: 6-way wideband antenna splitter / 2-way antenna combiner for wireless systems with BNC connection, antenna supply 8 Volt DC, 470-832 MHz. Order # 711.160
- WA-ZAPD1: Passive 2-way combiner with BNC connections, 470 - 790 MHz. Order # 711.217
Antennas
- WA-ATDA: Passive/active wideband directional antenna for wireless systems with BNC connection, 470-790 MHz. Order # 711.004
- WA-ATO: Wideband omnidirectional antenna for wireless systems with BNC connection, 470-790 MHz. Order # 711.586
Cables
- WA-AC25: BNC antenna cable, length 25 metres, low-attenuation Aircell 7 cable. Order # 711.578
- WA-AC10: BNC antenna cable, length 10 metres, low-attenuation Aircell 7 cable. Order # 711.551
- WA-AC5: BNC antenna cable, length 5 metres, low-attenuation Aircell 7 cable. Order # 711.543
- WA-CGI: Connecting cable to connect instruments with a mono 1/4" jack plug. Order # 711.608
Amplifier
- WA-AMP2: Wideband antenna amplifier for wireless systems with BNC connection, switchable amplification of 5 dB / 10 dB / 15 dB, 470-1,000 MHz. Order # 712.035
Technical Specifications
| Operating principle | Digital UHF true diversity receiver |
| Frequency range |
|
| Frequency response | 20 - 20,000 Hertz |
| Dynamic range | 116 dB (128 dB with -12 dB level decrease in the beltpack transmitter) |
| Output level | max. +18 dBu balanced (XLR and jack output) |
| Output impedance | 0 to 42 dB gain |
| Jack output | 120 Ω |
| Antenna input | 8 Volt DC, 150 mA |
| Headphone output | switchable with volume control |
| Latency | 2.1 ms (overall latency from transmitter to receiver) |
| Encryption & Audio CODED | Switchable, proprietary encryption scheme based upon a 16 bit pattern; "Triple-Play" CODEC with low latency and high error resilience |
| Display | OLED |
| Mains connection | 100 Volt - 240 Volt AC |
| Power consumption | 13.8 W (typ.) |
| Weight | 3200 g |
| Dimensions | 420x242x44 mm |
| Antenna connection | 2 x BNC input / 2 x BNC output |
| Network connection | Ethernet / Dante, RJ45: 48 kHz, 96 kHz, 24 bit |
Dimensions
The TG 1000 Dual Receiver has a standard 19-inch rack-mountable form factor.
Overall width: 482.60 mm (19 inches).
Chassis width: 420 mm (16.53 inches).
Height: 43.6 mm (1.72 inches).
Depth: 214.2 mm (8.43 inches) for the main body, with an additional 242.3 mm (9.54 inches) including rack ears/handles. The rear panel depth is approximately 15 mm (0.59 inches).
