JVC KD-X200 Digital Media Receiver

Compatibility

Made for iPod

Made for iPhone

Works with Pandora

Important Information

Please read all instructions carefully before operation to obtain the best possible performance from the unit.

Por favor lea detenidamente este manual para comprender a fondo todas las instrucciones y obtener un máximo disfrute de esta unidad.

Veuillez lire les instructions attentivement avant d'utiliser l'appareil afin d'obtenir les meilleures performances possibles de l'appareil.

For Customer Use

Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference.

Model No.:

Serial No.:

Safety Warnings and Precautions

⚠️ Warning

Do not operate any function that takes your attention away from safe driving.

⚠️ Caution

Volume Setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accident.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the USB device or iPod/iPhone if it might hinder driving safety.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

Maintenance

How to attach/detach the faceplate

Diagram: Shows a sequence of two steps. Step 1: Detach the faceplate by pulling it out from the left side (indicated by arrow 1). Step 2: Insert the faceplate into the unit from the right side and push it until it clicks (indicated by arrow 2).

How to reset your unit

Diagram: Shows the faceplate detached from the main unit. A reset button is indicated with a small circle and an arrow pointing to it. Pressing this button will reset the unit.

Your preset adjustments will also be erased.

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicon or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector with a cotton swab gently, taking care not to damage the connector.

How to read this manual

• This manual mainly explains operations using the buttons on the faceplate.
• < > indicates the displays on the faceplate.
• [XX] indicates the initial setting of a menu item.

Contents

• Preparation
• Basic operations
• Remote control
• Radio
• USB
• iPod/iPhone
• External components
• Bluetooth®
• Sound adjustments
• Menu operations
• Additional information
• Troubleshooting
• Specifications
• Installation/Connection

Preparation

Canceling the display demonstration

The display demonstration is always turned on unless you cancel it.

Diagram: Shows a sequence of 4 steps. Step 1: Press and hold MENU button. Step 2: Select CLOCK. Step 3: Select DEMO OFF. Step 4: Press MENU to exit.

Setting the clock

Diagram: Shows a sequence of 7 steps. Step 1: Press and hold MENU. Step 2: Select CLOCK. Step 3: Select CLOCK SET. Step 4: Select the day of week (e.g., MON). Step 5: Adjust the hour. Step 6: Adjust the minute. Step 7: Press MENU to exit.

Basic operations

Faceplate and Remote Control

Diagram: An illustration of the JVC KD-X200 faceplate showing buttons like DISP, MENU, SOURCE, EQ, volume knob, display window, iPod MODE, AUX input jack, USB input terminal. An illustration of the remote control (RM-RK52) is also shown with buttons like SOURCE, VOL-/+, SOUND, navigation arrows, and number buttons.

Remote Sensor: Aim the remote control directly at the sensor. Do not expose to bright sunlight.

When you press or hold the following button(s)...

Display information

DISP button:

• Changes the display information. (Press)
• Scrolls the current display information. (Hold)

*1 For FM Radio Broadcast Data System stations only.

Remote control

Preparing

When you use the remote control for the first time, pull out the insulation sheet.

Diagram: Shows the remote control with an insulation sheet being pulled out from the battery compartment.

For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

Replacing the lithium coin battery

If the effectiveness of the remote control decreases, replace the battery.

Diagram: Shows the back of the remote control, indicating how to open the battery compartment (using a coin or similar object to turn the cover), remove the old CR2025 battery, and insert the new one.

⚠️ Caution

• Do not leave the remote control in hot places such as on the dashboard.
• The lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Radio

Searching for a station

Diagram: Shows the faceplate with the FM/AM band selection and tuning buttons highlighted. An indicator 'ST' is shown on the display.

1. Select <FM> or <AM>.
2. Auto search. (Press) Manual search. (Hold)

"M" flashes, then press the button repeatedly.

"ST" lights up when receiving an FM stereo broadcast with sufficient signal strength.

Storing stations in memory

Manual presetting

You can preset up to 18 stations for FM and 6 stations for AM.

While listening to a station...

Diagram: Shows a sequence of steps. Step 1: Press and hold the number button (1-6). The preset number flashes and "MEMORY" appears.

The current station is stored to the selected number button (1-6).

Auto presetting (FM only)

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

Diagram: Shows a sequence of steps. Step 1: Press and hold MENU. Step 2: Select TUNER, then SSM. The unit searches for strong stations and stores them sequentially (e.g., <SSM 01-06>).

"SSM" flashes. When all the stations are stored, "SSM" stops flashing.

To preset <SSM 07 – 12>/<SSM 13 – 18>, repeat steps 1 and 2.

Selecting a preset station

Diagram: Shows a sequence of steps. Step 1: Press and hold MENU to enter preset mode. "PRESET MODE" flashes. Step 2: Select the preset number using the navigation buttons or remote control.

The preset number flashes and "MEMORY" appears.

Setting the Radio Timer

You can tune in to a preset station at a specific time regardless of the current source.

Diagram: Shows a sequence of steps. Step 1: Press and hold MENU. Step 2: Select TUNER, then RADIO TIMER. Step 3: Select OFF, ONCE, DAILY, or WEEKLY. Step 4: Select the preset station (e.g., <FM> or <AM> and station number). Step 5: Set the activation day and time. Step 6: Press MENU to exit.

[OFF] Cancels Radio Timer.

ONCE Activates once.

DAILY Activates daily.

WEEKLY Activates weekly.

• A light up after the Radio Timer has been set.

• Only one timer can be set. Setting a new timer will override the previous setting.

• The Radio Timer will not activate if the unit is turned off or if <AM> is set to <OFF> in <SRC SELECT> after selecting an AM station for the timer.

Searching for your favorite Programs - Program Type (PTY) Search

This feature is only available for FM Radio Broadcast Data System stations.

Diagram: Shows a sequence of steps. Step 1: Press and hold TUNER. Step 2: Select PTY code.

PTY codes:

• NEWS
• INFORM (information)
• SPORTS
• TALK
• ROCK
• CLS ROCK (classic rock)
• ADLT HIT (adult hits)
• SOFT RCK (soft rock)
• TOP 40
• COUNTRY
• OLDIES
• SOFT
• NOSTALGA (nostalgia)
• JAZZ
• CLASSICL (classical)
• R & B (rhythm and blues)
• SOFT R & B (soft rhythm and blues)
• LANGUAGE
• REL MUSC (religious music)
• REL TALK (religious talk)
• PERSNLTY (personality)
• PUBLIC
• COLLEGE
• HABL ESP (spanish talk)
• MUSC ESP (spanish music)
• HIP HOP
• WEATHER

USB

Playing a USB device

Diagram: Shows a USB device connected to the USB input terminal on the faceplate using a USB 2.0 cable (not supplied).

The source changes to "USB" and playback starts.

* Do not leave the cable in the car when not in use.

• This unit can play MP3/WMA/WAV files stored in USB mass storage device (such as a USB memory and Digital Audio Player).

Selecting a folder/track

Diagram: Shows the volume knob. A press action selects track/chapter. A hold action fast-forwards or reverses the track.

• Selects folder.
• Selects track. (Press)
• Fast-forwards or reverses the track. (Hold)

Selecting a track/folder from the list

Diagram: Shows a sequence of steps. Step 1: Press MENU. Step 2: Select a folder (for MP3/WMA/WAV) or select the desired list (PLAYLISTS, ARTISTS, ALBUMS, SONGS, GENRES) for JVC Playlist Creator (JPC) and JVC Music Control (JMC) files (see page 16).

Selecting the playback modes

You can select one of the following playback modes at a time.

Diagram: Shows buttons labeled '5' and '6'. Press 6 for REPEAT. Press 5 for RANDOM.

If the USB device contains many folders or tracks, you can fast search for the desired folder or track by turning the volume knob quickly.

iPod/iPhone

Playing an iPod/iPhone

Diagram: Shows an iPod/iPhone connected to the USB input terminal on the faceplate using a USB 2.0 cable (accessory of the iPod/iPhone).

The source changes to "USB" → "USB-IPOD" and playback starts (depending on the status of the connected device).

* Do not leave the cable in the car when not in use.

Selecting the control mode

• You can also change the setting using <IPOD SWITCH> in the menu. (see page 14)

Selecting a track

Applicable under <HEAD MODE>/<IPOD MODE> only.

Diagram: Shows the volume knob. A press action selects track/chapter. A hold action fast-forwards or reverses the track.

• Selects track/chapter. (Press)
• Fast-forwards or reverses the track. (Hold)

Selecting a track from the list

Applicable under <HEAD MODE> only.

Diagram: Shows a sequence of steps. Step 1: Press MENU. Step 2: Select the desired list (PLAYLISTS, ARTISTS, ALBUMS, SONGS, PODCASTS, GENRES, COMPOSERS, AUDIOBOOKS). Step 3: Select the desired track.

Repeat this step until the desired track is selected.

• If the selected menu contains many tracks, you can fast search for the desired track by turning the volume knob quickly.

Selecting the playback modes

Applicable under <HEAD MODE> only.

You can select one of the following playback modes at a time.

Diagram: Shows buttons labeled '5' and '6'. Press 6 for REPEAT. Press 5 for RANDOM.

• "ALBUM RND" is not applicable for some iPod/iPhone.

Pandora®

Preparation

1. Search for "Pandora" in the Apple iTunes App Store to find and install the most current version of the Pandora application onto your device.
2. In the application on your device, log in and create an account with Pandora. If you are not a registered user, an account can also be created at www.pandora.com.

• Pandora is only available in the US.
• Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.
• Some functions of Pandora cannot be operated from this unit.
• For issues using the application, please contact Pandora at pandora-support@pandora.com.

Listening to Pandora

1. Open the Pandora application on your device.
2. Connect the device to USB terminal on the faceplate. (see page 9)

The source switches to "PANDORA" and broadcast starts automatically from your current station.

Basic Operations

Diagram: Shows playback controls. A play/pause icon starts/pauses playback. Thumbs up/down icons select thumbs up/thumbs down. If thumbs down is selected, the current track is skipped. An arrow icon skips track.

Creating a new station

You can create a new station based on the currently playing song or artist.

Diagram: Shows a sequence of steps. Step 1: Press and hold MENU. Step 2: Select <NEW STATION>, then <FROM ARTIST> or <FROM TRACK>.

A new station is created based on the current song or artist.

Searching the registered station from the list

Diagram: Shows a sequence of steps. Step 1: Press and hold MENU. Step 2: Select the station list display mode (BY DATE or A-Z). Step 3: Select the desired station.

To bookmark song/artist information

While receiving a song...

Diagram: Shows a sequence of steps. Step 1: Press and hold the button. Step 2: The display shows <THIS ARTIST> → <THIS TRACK>.

"BOOKMARKED" appears and the song/artist information is stored to the iPod/iPhone.

• This unit allows you to bookmark songs and/or artists in your personalized Pandora account. The bookmarks will not be available for review on the unit but will be available in your Pandora account.

External components

Playing an external component from AUX

You can connect an external component to the AUX (auxiliary) input jack on the faceplate. For details, refer also to the instructions supplied with the external components.

Diagram: Shows a 3.5 mm (1/8") stereo mini plug with an "L" shaped connector (not supplied) connecting to the AUX terminal on the faceplate. A portable audio player is shown as an example device. Another diagram shows a 3-terminal plug head stereo mini plug for optimum audio output.

1. Connect to AUX terminal on the faceplate.
2. Select <AUX>.
3. Turn on the connected component and start playing the source.

Bluetooth®

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the auxiliary input jack (AUX) on the faceplate of the unit.

• KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this unit.
• Operations may be different depending on the connected Bluetooth device. For details, refer also to the instructions supplied with the device.

Diagram: Shows the KS-BTA100 adapter connected to the unit's AUX jack. Wiring harness colors (Blue/white, Black, Brown) are shown with corresponding functions (Remote, Ground, Tel muting).

Preparation

For details on registering and using the Bluetooth device, refer to the instructions manual supplied with KS-BTA100.

1. Register (pair) a Bluetooth device with KS-BTA100.
2. Change the <SRC SELECT> settings of this unit.

Diagram: Shows the MENU button being held, then selecting <SRC SELECT>, <AUX>, and <BT ADAPTER>.

3. Press MENU to exit.

Sound adjustments

This unit memorizes sound settings adjusted for each individual source.

Selecting the preset sound

You can select a preset sound mode, for each individual source, suitable for the music genre.

Diagram: Shows a sequence of steps. Step 1: Press and hold MENU. Step 2: Select PRO EQ. Step 3: Select BASS, MIDDLE, or TREBLE. The available preset modes are FLAT, NATURAL, DYNAMIC, VOCAL BOOST, BASS BOOST, USER.

Storing your own adjustments

While listening, you can adjust and store the tone level for each individual source.

Easy Equalizer

Diagram: Shows a sequence of steps. Step 1: Press and hold EQ. Step 2: Adjust the level using the volume knob.

Diagram: Shows the Bass, Middle, and Treble adjustment screens with Frequency, Level, and Q settings.

(Initial: [XX])

Diagram: Shows the SUB.W, BASS LVL, MID LVL, TRE LVL settings.

The adjustments are stored and <USER> is activated.

* Available only when <L/O MODE> is set to <SUB.W> and <SUB.W> is set to <ON>. (see page 13)

Repeat steps 2 and 3 to adjust other tones. The adjustments are stored and <USER> is activated.

Press MENU to exit.

Menu operations

Diagram: Shows the MENU button being held for 2 seconds.

If no operation is done for about 60 seconds, the operation will be canceled.

• To return to the previous menu, press ⇦.
• To exit from the menu, press DISP or MENU.

Menu Item List

*6 The illumination control wire connection is required. (see page 21)

*7 Some characters or symbols will not be shown correctly (or will be blanked) on the display.

*8 Displayed only when the source is "USB".

*9 Displayed only when the unit is in any source other than the corresponding source "AM/ PANDORA/AUX".

AUDIO Section Menu Items

*1 If you are using a two-speaker system, set the fader level to "00".

*2 This adjustment will not affect the subwoofer output.

*3 Displayed only when <L/O MODE> is set to <SUB.W>.

*4 Displayed only when <SUB.W> is set to <ON>.

*5 This setting does not work if <BT ADAPTER> is selected for <AUX> of <SRC SELECT>.

Additional information

About audio files

Playable files

• File extensions: MP3(.mp3), WMA(.wma), WAV(.wav)
• Bit rate:
  MP3: 8 kbps - 320 kbps
  WMA: 16 kbps - 320 kbps
• Sampling frequency:
  MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz
  WMA: 8 kHz - 48 kHz
  WAV: 48 kHz, 44.1 kHz (USB source only)
• Variable bit rate (VBR) files. (The elapsed time for VBR files will not be displayed correctly.)

Others

• This unit can show WMA Tag and ID3 Tag Version 1.0/1.1/2.3/2.4 (for MP3).
• The search function works but search speed is not constant.

About USB device

• When connecting a USB cable, use the USB 2.0 cable.
• You cannot connect a computer or portable HDD to the USB input terminal of the unit.
• Connect only one USB device to the unit at a time. Do not use a USB hub.
• USB devices equipped with special functions such as data security functions cannot be used with the unit.
• Do not use a USB device with 2 or more partitions.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
• This unit may not recognize a memory card inserted into the USB card reader.
• This unit may not play back files in a USB device properly when using a USB extension cord.
• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.
• Operation and power supply may not work as intended for some USB devices.
• The maximum number of characters for:
  Folder names: 64 characters
  File names: 64 characters
  MP3 Tag: 64 characters
  WMA Tag: 64 characters
  WAV Tag: 64 characters (USB source only)
• This unit can recognize a total of 20 480 files, 999 folders (999 files per folder including folder without unsupported files), and of 8 hierarchies.

Cautions

• Do not pull out and attach the USB device repeatedly while "READING" is shown on the display.
• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature. Failure to do so may result in deformation or cause damages to the device.

About iPod/iPhone

• iPod/iPhone that can be connected to this unit:
  iPod touch (4th generation)
  - iPod touch (3rd generation)
  - iPod touch (2nd generation)
  - iPod touch (1st generation)
  - iPod classic
  - iPod with video (5th generation)*
  - iPod nano (6th generation)
  - iPod nano (5th generation)
  - iPod nano (4th generation)
  - iPod nano (3rd generation)
  - iPod nano (2nd generation)
  - iPod nano (1st generation)*
  - iPhone 4S
  - iPhone 4
  - iPhone 3GS
  - iPhone 3G
  - iPhone
  *<IPOD MODE>/<EXT MODE> are not applicable.
• It is not possible to browse video files on the "Videos" menu in <HEAD MODE>.
• The song order displayed on the selection menu of this unit may differ from that of the iPod.
• When operating an iPod/iPhone, some operations may not be performed correctly or as intended. In this case, visit the following JVC website: http://www3.jvckenwood.com/english/car/index.html (English website only).

About JVC Playlist Creator and JVC Music Control

• This unit supports the PC application JVC Playlist Creator and Android™ application JVC Music Control.
• When you play audio file with song data added using the JVC Playlist Creator or JVC Music Control, you can search for audio file by Genres, Artists, Albums, Playlists, and Songs.
• JVC Playlist Creator and JVC Music Control are available from the following website: http://www3.jvckenwood.com/english/car/index.html (English website only).

Troubleshooting

General

FM/AM

USB/iPod/iPhone

Pandora

Specifications

AUDIO AMPLIFIER SECTION

TUNER SECTION

USB SECTION

GENERAL

Subject to changes without notice.

Installation/Connection

Part list for installation

Diagram: Lists installation parts: Ⓐ Faceplate (x1), Ⓑ Mounting sleeve (x1), Ⓒ Trim plate (x1), Ⓓ Wiring harness (x1), Ⓔ Extraction keys (x2).

Basic procedure

1. Remove the key from the ignition switch, then disconnect the Ⓑ terminal of the car battery.
2. Connect the wires properly. (see page 21)
3. Install the unit to your car. (see page 20)
4. Reconnect the Ⓑ terminal of the car battery.
5. Reset the unit. (see page 2)

⚠️ Warning

• The unit can only be used with a 12 V DC power supply, negative ground.
• Disconnect the battery's negative terminal before wiring and mounting.
• Do not connect the Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent short circuit.
• Insulate unconnected wires with vinyl tape to prevent short circuit.
• Be sure to ground this unit to the car's chassis again after installation.

⚠️ Caution

• For safety's sake, leave wiring and mounting to professionals. Consult the car audio dealer.
• Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after the use of the unit. Metal parts such as the heat sink and enclosure become hot.
• Do not connect the wires of speaker to the car chassis, Ground wire (black), or in parallel.
• Connect speakers with a maximum power of more than 50 W. If the maximum power of the speakers is lower than 50 W, change the <AMP GAIN> setting to avoid damaging the speakers. (see page 13)
• Mount the unit at an angle of 30° or less.
• If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle's fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.
• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. of the car are working properly.
• If the fuse blows, first make sure the wires are not touching car's chassis, then replace the old fuse with one that has the same rating.

Installing the unit

In-dash mounting

Diagram: Shows a 4-step process for in-dash mounting using the faceplate (A), mounting sleeve (B), trim plate (C), wiring harness (D), and extraction keys (E). Includes bending tabs to hold the sleeve and ensuring trim plate direction.

When installing without the mounting sleeve

Diagram: Shows how to mount the unit using flat or round head screws (M5 x 8 mm) and a bracket (not supplied).

How to remove the unit

Diagram: Shows a 3-step process for removing the unit using extraction keys (E).

Wiring connection

Diagram: A detailed wiring diagram showing connections between the JVC Amplifier, ignition switch, fuse block, vehicle wiring harness, and external components like antenna and speakers. Color-coded wires are shown with their functions.

Recommended connection:

• Blue: To power antenna
• Blue/white: To amplifier

Join the same color wires together:

• Blue/white: Remote (200 mA max.)
• Orange/white: Illumination
• Brown: Tel muting
• Yellow: 12 V Battery
• Red: 12 V Ignition switch
• Black: Ground
• White: Front speaker (left)
• White/black
• Gray: Front speaker (right)
• Gray/black
• Green: Rear speaker (left)
• Green/black
• Purple: Rear speaker (right)
• Purple/black

Vehicle-specific Wiring Harness (separately purchased)

*1 Not supplied for this unit.

For more information:

• Metra Electronics: www.metraonline.com
• Scosche Industries: www.scosche.com

If you have any troubles, try the following:

1. Check "Troubleshooting" (see page 17).
2. Reset the unit. (see page 2)
3. Contact (USA only)
   Call: 1-800-252-5722 (or) visit: http://www.jvc.com

FCC Warning and Information

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Information about disposal of electrical and electronic equipment at the end of its useful life (applicable to countries that have adopted independent waste collection systems)

Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con su administración local para obtener información sobre el punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

Trademarks and Software Information

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.
• Android is trademark of Google Inc.

© 2012 JVC KENWOOD Corporation

Additional Installation Notes

Diagram: Shows a screw being used to attach the control panel to the main unit when it is not required to detach it.

WHEN IT IS NOT REQUIRED TO DETACH THE FRONT CONTROL PANEL FROM THE MAIN UNIT, USE THE PROVIDED SCREW TO ATTACH THE CONTROL PANEL TO THE MAIN UNIT.

Wiring Caution Label

Diagram: A label with four steps for wiring. Step 1: Connect Ground First (GND). Step 2: Connect Other Wires. Step 3: Connect Antenna Terminal. Step 4: Connect Power Cord to the Unit. A large CAUTION text warns about connecting the black wire (GND) first, otherwise, damage to the unit may occur. Incorrect connection causes serious damage.

Warranty Information

Canada Warranty

OWNER'S COPY OF WARRANTY CARD

Save sales docket together with this warranty card, as a proof of date of purchase.

Fields for: MODEL, SERIAL NO., Purchase from, Dealer's Address, City or Town, Owner's Name, Owner's Address, Date purchased.

JVC CANADA INC.

6070 Kestrel Road, Mississauga, Ontario, L5T 1S8 Canada

TEL: (905) 670-3381 FAX: (905) 670-7244

Website: http://www.jvc.ca

JVC CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer. JVC warrants that this JVC product is free, under normal use and maintenance, from any defects in material and workmanship subject to the following terms and conditions:

1. To Obtain Warranty Service:

• JVC Product requiring service must be Presented together with Proof of purchase.
• The JVC product must be brought in for service to an authorized JVC Service Centre.

2. Limitation:

This Warranty shall not apply to:

• Repair or replacement of any cabinets, batteries, plates, connection cords, antennas, dust covers, knobs, speaker grills, speaker cones, projection screens, projection screen savers, and all accessories.
• Any defects caused or repairs required as a result of misuse, abusive operation, negligence, improper use and/or insufficient care.
• Any defect caused or repairs required as a result of not following the instructions in the operation manual.
• Any JVC product tampered with, adjusted or repaired by any party other than JVC or authorized JVC Service Centre personnel.
• Any JVC products on which the serial number has been defaced, modified or removed.
• Maintenance, cleaning or periodic check-up
• Conversion to foreign or domestic voltage or frequency.
• Any JVC product without the Canadian Electrical Safety Regulations ID.
• Any JVC products used for commercial or institutional, rental, or display purposes.

Parts...... 1 year (except video head - 90 days)

Labour... 90 days

• Any JVC product which has been resold and no longer owned by the original purchaser.
• Product purchased from "outside Canada", "bankruptcy" or "liquidator".

WARRANTY TERM (VALID FROM THE DATE OF PURCHASE)

* In-home service to be provided where available. Where it is not available, the Purchaser must assume the responsibility and expense for the proper packing, shipment and all costs associated with the delivery of the equipment to and from the closest JVC Authorized Service Centre.

* Service à domicile fourni par un détaillant disponible. S'il n'y a pas de service JVC disponible à proximité, l'acheteur doit assumer la responsabilité et les coûts pour un emballage adéquat, l'expédition, ainsi que tous les coûts associés à la livraison de l'équipement chez et depuis le détaillant JVC autorisé le plus près pour un service d'entretien.

Other Warranty Terms (Canada):

• (I) Any defects caused by fire, flood, lightning, power surge, or other events beyond the control of JVC.
• (m) FOR AUTO PRODUCTS: Warranty does not cover elimination of car static or electrical interferences, cleaning of head, adjustments, or labour cost for the removal or reinstallation of the unit for repair.

3. Standards:

If any defects should be found in a JVC product within the applicable terms, necessary repairs shall be made at no cost to the purchaser for parts or labour when JVC acknowledges that such defects are due to faulty material or workmanship.

4. Exclusion of All Other Express Warranties:

This warranty constitutes the entire express warranty given by JVC for JVC products and no dealer or service centre personnel or his, its or their agent or employee is, or are authorized to extend or enlarge this warranty on behalf of JVC.

5. Disclaimer of Consequential Damage:

To the extent the law permits JVC disclaims any responsibility for loss of time or use of its product, transportation costs, or any other indirect, incidental or consequential damage or inconvenience.

JVC CANADA INC.

Service toll free #: 1-800-964-2650

E-mail: service@jvc.ca

United States Limited Warranty

LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A.

JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below. ("The Warranty Period")

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN THE COMMONWEALTH OF PUERTO RICO.

WHAT WE WILL DO:

If this product is found to be defective within the warranty period, JVC will repair or replace defective parts with new or rebuilt equivalents at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products may be brought to a JVC authorized service center on a carry-in basis. Color televisions with a screen size of 37"class or greater qualify for in-home service. In such cases, a technician will come to your home and either repair the TV there or remove and return it if it cannot be repaired in your home.

WHAT YOU MUST DO FOR WARRANTY SERVICE:

Please do not return your product to the retailer. Instead, return your product to the JVC authorized service center nearest you. If shipping the product to the service center, please be sure to package it carefully, preferably in the original packaging, and include a brief description of the problem(s). Please call 1-800-252-5722 to locate the nearest JVC authorized service center. Service locations can also be obtained from our website http://www.jvc.com. If your product qualifies for in-home service, the service representative will require clear access to the product.

If you have any questions concerning your JVC Product, please contact our Customer Care Center at 800-252-5722.

WHAT IS NOT COVERED:

1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial number has been altered, tampered with, defaced or removed;
2. Initial installation, installation and removal from cabinets or mounting systems.
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. User Removal Memory Devices/Video Pick-up Tubes/CCD Image Sensors are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
9. Products used for commercial purposes, including, but not limited to rental.
10. Loss of data resultant from malfunction of hard drive or other data storage device;

There are no express warranties except as listed above.

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.

JVC SHALL NOT BE LIABLE FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE, OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

JVC AMERICAS CORP.

1700 Valley Road, Wayne, New Jersey 07470

Website: http://www.jvc.com

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAIL OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.

Customer Support

TO OUR VALUED CUSTOMER

THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE.

NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHASE ACCESSORIES?

JVC IS HERE TO HELP!

TOLL FREE: 1(800)252-5722

Website: http://www.jvc.com

Remember to retain your Bill of Sale for Warranty Service.

Do not attempt to service the product yourself

Caution

To prevent electrical shock, do not open the cabinet. There are no user serviceable parts inside. Please refer to qualified service personnel for repairs.

PRODUCT REGISTRATION

We suggest that you register your product since it will enable us to contact you directly if it is ever necessary to correct a safety related condition in your product.

You can register at www.register.jvc.com

Please note that failure to register does not diminish any of your rights during the warranty period.