UltraLux LED Floodlight LSFM Series Installation Manual

Energy Efficiency

This product contains a light source of energy efficiency class D.

Mounting Instructions

Note: The installation base must be able to support 10 times the weight of the product!

Follow these steps for installation:

1. Step 1: Turn off the electrical power supply before starting any work.
2. Step 2: Connect the wires to the terminal block.
3. Step 3: Mount the luminaire onto the bracket.
4. Step 4: Secure the wires.
5. Step 5: Connect the wires to the power supply, observing polarity: Live (L) - Brown; Ground - Yellow/Green; Neutral (N) - Blue.
6. Step 6: Attach the luminaire to the mounting surface.
7. Step 7: The luminaire is now ready for operation (ON).

Dimensions:

• Overall Width: 430 mm
• Overall Height: 220 mm
• Depth: 55 mm
• Mounting Bracket Height: 160 mm
• Mounting Bracket Width: 160 mm
• Base Dimensions: 140 mm x 220 mm

Important Safety and Installation Notes

1. Performing any work with live electrical voltage carries a potential risk of electric shock. The power supply must be switched off before starting work.
2. Mount the luminaire only on a base that has an ignition temperature greater than 200°C and does not deform (e.g., metal, plaster, concrete).
3. The luminaire should be connected to the power supply of a properly functioning electrical installation, meeting current requirements, by a qualified specialist.
4. The installation of the luminaire must be carried out according to these instructions by a qualified specialist.
5. When connecting to the power supply of a properly functioning electrical installation, follow the polarity: Live (L) - Brown; Ground - Yellow/Green; Neutral (N) - Blue.
6. All cables and auxiliary elements must be placed at an appropriate distance from the heated parts of the luminaire. When mounting, pay attention to the requirements for minimum distance from illuminated objects.
7. The unit may heat up during operation, so wait for it to cool down before replacement.
8. Before replacement, disconnect the unit from the electrical network.
9. Clean with a dry cloth.
10. Do not cover the luminaire. To avoid the risk of fire, ensure free air circulation to the heating elements.
11. If the power cable of the luminaire is damaged, it must be replaced by the manufacturer, its authorized representative, or a technically qualified specialist to prevent accidents and damage.
12. Not suitable for accent lighting.
13. Before switching on the unit, ensure that its installation has been carried out correctly and eliminates the risk of operational defects, risks to the external environment, and users.
14. The importer (supplier) is not responsible for damages resulting from non-compliance with the above mounting recommendations.

Environmental Protection

The product and its components are not hazardous to the environment.

Please dispose of packaging elements separately in the designated containers for the respective material.

The WEEE symbol [WEEE symbol] indicates that this product is not household waste, and the user is obliged to dispose of it only in separate collection containers for waste electrical and electronic equipment (EEE) to protect the environment and human health. For recycling this product, please contact the point of purchase or follow the instructions of waste management organizations in your region.