Bradford White Upright Electric Residential Water Heater
Features
- Bradford White is an ISO 9001-2015 registered manufacturing facility.
- Certified to IEC 60335-2-21.
- Snap-Lock Lid and Base Pan: Eliminates the need for screws, resulting in a clean appearance and smooth handling surface.
- Glass Lined Steel Tank.
- 30 mm (1.2") Non-CFC Foam Insulation: Covers the sides and top of the tank, reducing heat loss, energy consumption, and improving operation efficiencies and jacket rigidity.
- Incoloy Elements: Screw-in style, transfers heat directly and efficiently to the water.
- Fully Automatic Thermostat Controls: Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety.
- Pilot Light: Indicates that the elements are actively heating the water.
- Water Connections: Color-coded for ease of installation. 3/4" NPT for BW200 & BW300. 1" NPT for BW450.
- Protective Anode Rod: G1 thread, provides added protection against corrosion for long-term service.
- Powder Coated External Jacket: Combines attractive appearance with maximum protection.
- Electrical Configurations Available:
- 208V - 240V, Single Phase, Non-Simultaneous Element Operation.
- 380V - 415V, Three Phase, Simultaneous Element Operation.
- Ingress Protection ratings: Water Heater: IP44. Junction Box: IP68.
- T&P Relief Valve: Included.
- Drain Valve: Included (G1/2 thread).
- Pressure Ratings: 10 bar working pressure and 20 bar test pressure.
Specifications
The following table details the specifications for the Upright Residential Electric Water Heater models.
| Model Number | Nominal Capacity (Liters) | Dimension A (in./mm.) | Dimension B (in./mm.) | Dimension C (in./mm.) | Dimension D (in./mm.) | Dimension E (in./mm.) | Dimension F (in./mm.) | Dimension G (in./mm.) | Approx. Shipping Weight (lbs./kg.) |
|---|---|---|---|---|---|---|---|---|---|
| BW200-R | 190 | 47.3 / 1202 | 8 / 203 | 45.9 / 1165 | 21 / 533 | 37.6 / 954 | 8.3 / 211 | 21.9 / 555 | 132 / 60 |
| BW300-R | 300 | 64.3 / 1633 | 8 / 203 | 62.8 / 1596 | 22 / 560 | 53.9 / 1369 | 8.9 / 227 | 22.9 / 582 | 187 / 85 |
| BW450-R | 450 | 68.5 / 1739 | 8 / 203 | 67.4 / 1713 | 26.4 / 670 | 56.8 / 1443 | 10.6 / 270 | 27.3 / 694 | 236 / 107 |
Diagram shows front, side, and top views of the water heater with dimensions labeled A through G.
Electrical Specifications (240V, 1 Phase)
| Total kW Input | 3.0 | 4.5 | 6.0 |
|---|---|---|---|
| Amperage | 12.5 | 18.8 | 25.0 |
| Recovery at 50°C (90°F) Rise (Gal./Hr.) | 14 | 21 | 28 |
Operating at 208V reduces total kW input by approximately 25%. The 3 kW option is not available in 208V.
Electrical Specifications (415V, 3 Phase, Unbalanced)
| Total kW Input | 6.0 | 9.0 | 12.0 |
|---|---|---|---|
| Amperage | 15 | 22.5 | 30 |
| Recovery at 50°C (90°F) Rise (Gal./Hr.) | 28 | 41 | 55 |
Operating at 380V reduces total kW input by approximately 25%.
General Information
- Models are built in accordance with IEC EN standards.
- All models are certified at 20 bar (290 PSI) test pressure and 10 bar (145 PSI) working pressure.
- Temperature range is approximately 32°C - 66°C (90°F - 150°F).
- SASO 2884 certification on select models/configurations. Contact your local authorized representative for available models.
- G Mark certification applies specifically to household electric storage water heaters with capacities up to 200 liters.
Dimensions and specifications are subject to change without notice in accordance with Bradford White's policy of continuous product improvement.
For more information on warranty, please visit www.bradfordwhite.com.
Contact Information:
- Telephone: 800-523-2931
- Email: international@bradfordwhite.com
- Technical Support: 800-334-3393
- Email: export.techsupport@bradfordwhite.com
© 2025, Bradford White Corporation, USA. All rights reserved.
