USB 3.0 HDMI Video Acquisition Card
Instruction Manual
Product Overview
This document serves as the instruction manual for the USB 3.0 HDMI Video Acquisition Card. This device allows for the capture of HDMI video signals and their transmission via USB 3.0 to a computer for recording, streaming, or broadcasting.
The device features a compact, black aluminum casing with "USB3.0 ULTRAHD HDMI Video Capture" printed on it. It also indicates HDCP 2.2 and EDID compliance.
Getting Started
To begin using the USB 3.0 HDMI Video Acquisition Card, connect your HDMI source (e.g., camera, game console) to the HDMI input port on the capture card. Then, connect the capture card to your computer using a USB 3.0 cable. Ensure your computer recognizes the device.
Software Setup
This capture card is compatible with various video capture and streaming software. The following steps outline a general process for setting up the device with capture software:
- Launch your preferred video capture software (e.g., OBS Studio, XSplit).
- Add a new video capture device source.
- Select the "USB 3.0 HDMI Video Capture" device from the list of available sources.
- Configure the video and audio settings as needed for your stream or recording. This may include resolution, frame rate, and audio input selection.
The software interface typically displays input signals, audio levels, and recording/streaming controls.
Specifications
While specific technical specifications are not detailed in this manual, the product is identified as a USB 3.0 device capable of handling 4K Ultra HD signals and supporting HDCP 2.2.
Troubleshooting
If you encounter issues, ensure all connections are secure and that you are using a USB 3.0 port on your computer. Check that your capture software is up-to-date and correctly configured.
