User Manual for SONIFEX models including: CM-LUR1 Balanced to Unbalanced Audio Converters, CM-LUR1, Balanced to Unbalanced Audio Converters, Unbalanced Audio Converters, Audio Converters, Converters
Sonifex Product User Handbooks
Sonifex CM-LUR1 - Balanced naar Unbalanced Audio Converter RJ45 naar Phono | Triple Audio B.V. | Engineering & Broadcast
File Info : application/pdf, 2 Pages, 3.46MB
DocumentDocumentHANDBOOK Passive Packs CM-LUR1 CM-LUX1 Balanced to Unbalanced Audio Converters Balanced to Unbalanced Audio Converters Manufacturers of Audio Products for AV, Installed Sound, Broadcast Radio & Broadcast TV For the latest Sonifex handbook information please visit the Sonifex website at www.sonifex.co.uk This handbook is for use with the following product: CM-LUR1 Bal to Unbal Audio Converter CM-LUX1 Bal to Unbal Audio Converter Stock Code: 30-376 Artwork: AW10920 ©Sonifex Ltd, 2020 All Rights Reserved Revision 1.03, February 2020 Sonifex Ltd, 61, Station Road, Irthlingborough, Northants, NN9 5QE, England. Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Website: https://www.sonifex.co.uk Informaon in this document is subject to change without noce and does not represent a commitment on the part of the vendor. Sonifex Ltd shall not be liable for any loss or damage whatsoever arising from the use of informaon or any error contained in this manual. No part of this manual may be reproduced or transmied in any form or by any means, electronic or mechanical, including photocopying, recording, informaon storage and retrieval systems, for any purpose other than the purchaser's personal use, without the express wrien permission of Sonifex Ltd. Unless otherwise noted, all names of companies, products and persons contained herein are part of a completely ficous adaptaon and are designed solely to document the use of Sonifex product. Made in the UK by Register Online for an Extended 2 Year Warranty Product: Serial No: www.sonifex.co.uk/register Product Warranty - 2 Year Extended As standard, Sonifex products are supplied with a 1 year back to base warranty. In order to register the date of purchase and so that we can keep you informed of any product design improvements or modificaons, it is important to complete the warranty registraon online. Addionally, if you register the product on the Sonifex website, you can increase your product warranty to 2 years. Go to the Sonifex website at: www.sonifex.co.uk/register to apply for your 2 year warranty. Sonifex Warranty & Liability Terms & Conditions 1. Definitions `the Company' means Sonifex Ltd and where relevant includes companies within the same group of companies as Sonifex Limited. `the Goods' means the goods or any part thereof supplied by the Company and where relevant includes: work carried out by the Company on items supplied by the Purchaser; services supplied by the Company; and soware supplied by the Company. `the Purchaser' means the person or organisaon who buys or has agreed to buy the Goods. `the Price' means the Price of the Goods and any other charges incurred by the Company in the supply of the Goods. `the Warranty Term' is the length of the product warranty which is usually 12 months from the date of despatch; except when the product has been registered at the Sonifex website when the Warranty Term is 24 months from the date of despatch. `the Contract' means the quotaon, these Condions of Sale and any other document incorporated in a contract between the Company and the Purchaser. This is the enre Contract between the pares relang to the subject maer hereof and may not be changed or terminated except in wring in accordance with the provisions of this Contract. A reference to the consent, acknowledgement, authority or agreement of the Company means in wring and only by a director of the Company. 2. Warranty a. The Company agrees to repair or (at its discreon) replace Goods which are found to be defecve (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are sasfied: i. noficaon of any defect is given to the Company immediately upon its becoming apparent to the Purchaser; ii. the Goods have only been operated under normal operang condions and have only been subject to normal use (and in parcular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiaon and must not have been used contrary to the Company's technical recommendaons); iii. the Goods are returned to the Company's premises at the Purchaser's expense; iv. any Goods or parts of Goods replaced shall become the property of the Company; v. no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior wrien consent; vi. the defect has not arisen from a design made, furnished or specified by the Purchaser; vii. the Goods have been assembled or incorporated into other goods only in accordance with any instrucons issued by the Company; viii. the defect has not arisen from a design modified by the Purchaser; ix. the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entled to the benefit of any warranty or guarantee provided by such manufacturer to the Company. b. In respect of computer soware supplied by the Company the Company does not warrant that the use of the soware will be uninterrupted or error free. c. The Company accepts liability: i. for death or personal injury to the extent that it results from the negligence of the Company, its employees (whilst in the course of their employment) or its agents (in the course of the agency); ii. for any breach by the Company of any statutory undertaking as to tle, quiet possession and freedom from encumbrance. d. Subject to condions (a) and (c) from the me of despatch of the Goods from the Company's premises the Purchaser shall be responsible for any defect in the Goods or loss, damage, nuisance or interference whatsoever consequenal economic or otherwise or wastage of material resulng from or caused by or to the Goods. In parcular the Company shall not be liable for any loss of profits or other economic losses. The Company accordingly excludes all liability for the same. e. At the request and expense of the Purchaser the Company will test the Goods to ascertain performance levels and provide a report of the results of that test. The report will be accurate at the me of the test, to the best of the belief and knowledge of the Company, and the Company accepts no liability in respect of its accuracy beyond that set out in Condion (a). f. Subject to Condion (e) no representaon, condion, warranty or other term, express or implied (by statute or otherwise) is given by the Company that the Goods are of any parcular quality or standard or will enable the Purchaser to aain any parcular performance or result, or will be suitable for any parcular purpose or use under specific condions or will provide any parcular capacity, notwithstanding that the requirement for such performance, result or capacity or that such parcular purpose or condions may have been known (or ought to have been known) to the Company, its employees or agents. g. i. To the extent that the Company is held legally liable to the Purchaser for any single breach of contract, tort, representaon or other act or default, the Company's liability for the same shall not exceed the price of the Goods. ii. The restricon of liability in Condion (g)(i) shall not apply to any liability accepted by the Seller in Condion (c). h. Where the Goods are sold under a consumer transacon (as defined by the Consumer Transacons (Restricons on Statements) Order 1976) the statutory rights of the Purchaser are not affected by these Condions of Sale. Unpacking Your Product Each product is shipped in protecve packaging and should be inspected for damage before use. If there is any transit damage take pictures of the product packaging and nofy the carrier immediately with all the relevant details of the shipment. Packing materials should be kept for inspecon and also for if the product needs to be returned. The product is shipped with the following equipment so please check to ensure that you have all of the items below. If anything is missing, please contact the supplier of your equipment immediately. Item Product Unit A3 Folded Handbook Quanty 1 1 Repairs & Returns Please contact Sonifex or your supplier if you have any problems with your Sonifex product. Email technical.support@sonifex.co.uk for the repair/upgrade/ returns procedure, or for support & quesons regarding the product operaon. Conformity The products in this manual comply with the essenal requirements of the relevant European health, safety and environmental protecon legislaon. The technical jusficaon file for this product is available at Sonifex Ltd. The declaraon of conformity can be found at: hp://www.sonifex.co.uk/ declaraons WEEE Directive The Waste Electrical and Electronic Equipment (WEEE) Direcve was agreed on 13 February 2003, along with the related Direcve 2002/95/EC on Restricons of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS). The Waste Electrical and Electronic Equipment Direcve (WEEE) aims to minimise the impacts of electrical and electronic equipment on the environment during their life mes and when they become waste. All products manufactured by Sonifex Ltd have the WEEE direcve label placed on the case. Sonifex Ltd will be happy to give you informaon about local organisaons that can reprocess the product when it reaches its "end of use", or alternavely all products that have reached "end of use" can be returned to Sonifex and will be reprocessed correctly free of charge. Atmosphere/Environment This apparatus should be installed in an area that is not subject to excessive temperature variaon (<0°C, >50°C), moisture, dust or vibraon. This apparatus shall not be exposed to dripping or splashing, and no objects filled with water, such as vases shall be placed on the apparatus. 1 2 3 4 Passive Packs The passive packs are a range of small ulity products which use transformers to change audio input & output impedances and levels and to distribute audio signals. There are a range of different products to suit different needs: CM-HPR1 Headphone Volume Control CM-HPX1 Headphone Volume Control CM-ULR1 Unbal to Bal Audio Converter CM-ULX1 Unbal to Bal Audio Converter CM-LUR1 Bal to Unbal Audio Converter CM-LUX1 Bal to Unbal Audio Converter CM-AESX3 3 Way Dig AES3 Splier, XLR CM-AESB3 3 Way Dig AES3ID Splier, BNC CM-MS3 3 Way Microphone Splier CM-MNT1 Desk Mount Panel All of the products, along with the CM-TBU and CM-TLL, can be mounted to the underside of a desk using the CM-MNT1 desk mount plate. This fixes to the top side of the product and screws to the underside of a surface. Fig A: CM-MNT1 Desk-Mount Plate Fied on CM-AESX3 CM-LUR1 & CM-LUX1 Balanced to Unbalanced Audio Converters Fig 1-1: CM-LUR1 Front & Rear View These two products allow the connecon of a stereo balanced line input (RJ45 on the CM-LUR1 with StudioHub+TM pinout, 2 x female XLRs on the CM-LUX1) to a stereo unbalanced output on stereo phono connectors. They are transformer balanced, with a 2:1 rao, so 6dB of aenuaon is added to the input to help interface with the lower signal levels associated with consumer outputs. These units are passive versions of the RB-LU4 (though only 1 x stereo channel), and provide you with an alternave to having to interface a balanced output to an unbalanced input via specialist cables (either by shorng the non-phase to ground or disconnecng it). They are parcularly useful where a shared balanced audio feed needs interfacing to an unbalanced input on one or more pieces of equipment. Using a CM-LUR1 or CM-LUX1 galvanically isolates the audio, allowing you to connect via phono cables to an unbalanced input without compromising the distributed feed. RCA Phono Analogue Outputs (CM-LUR1 & CM-LUX1) Both units use a stereo unbalanced line output on a RCA phono connector with the following connecons: Pin Type White Tip: White Screen: Red Tip: Red Screen: Connecon Le Ground Right Ground Block Diagrams Fig 1-3: CM-LUR1 Block Diagram Technical Spec CM-LUR1/CM-LUX1 Audio Specificaon Input/Output Level Rao: Input/Output Impedance Rao: Max Input Level: Max Output Level: Frequency Response: Noise: Distoron Ref +8dBu (Output): Common Mode Rejecon: 2:1 4:1 +28dBu +22dBu 20Hz to 20kHz, +0/-0.5dB <-115dBu A-wgtd <0.01% >80dB Connecons Balanced Line Input CM-LUR1): Balanced Line Input (CM-LUX1): Unbalanced Line Output (CM-LUR1 & CM-LUX1): Equipment Type CM-LUR1: CM-LUX1: Physical Specificaon Dimensions (Raw): Weight: 1 x RJ45 female StudioHub+TM pinout 2 x female XLRs 2 x RCA phono connectors Balanced to unbalanced audio converter, RJ45 input Balanced to unbalanced audio converter, XLR input 7.7cm (W) x 8.3cm (D) x 4.2cm (H) 3.0" (W) x 3.3" (D) x 1.7" (H) Ne: 0.22kg Gross: 0.33kg Ne: 0.49lbs Gross: 0.73lbs Fig B: CM-MNT1 Desk-Mount Plate With Screws 5 Fig 1-2: CM-LUX1 Front & Rear View StudioHub+TM is a registered trademark of Radio Systems Inc Connectors & Controls Analogue Inputs CM-LUR1 The stereo analogue input is on a female RJ45 connector with the following standard StudioHub+TM pin assignments: Pin No. 1 2 3 4 5 6 7 8 Connecon Le Phase Le Non-Phase Right Phase Ground N/C Right Non-Phase N/C N/C Analogue Inputs CM-LUX1 The stereo analogue input is on two female 3 pin XLR connectors with the following pin assignments: Pin 1: 0V Common Pin 2: Phase Pin 3: Non Phase Fig 1-4: CM-LUX1 Block Diagram Fig 1-5: CM-LUX1 Applicaon Diagram 6 7 www.sonifex.co.uk t:+44 (0)1933 650 700 f:+44 (0)1933 650 726 sales@sonifex.co.uk 8
Welcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV StudiosWelcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV Studiossonifex.co.uk/registerWelcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV Studios