User Manual for ECOFLOW models including: DELTA Pro, Portable Home Battery, DELTA Pro Portable Home Battery
EcoFlow DELTA Pro Remote Control
2XEcoFlow DELTA PRO Remote Control Double Voltage Hub 400W Solar Panel
Ecoflow MC4 naar XT60 Solar verlengkabel (5m) - Dutchtravelshop.com
EcoFlow DELTA Pro (Remote Control) Product illustration Frequency pairing button Power button Display Remote control icon USB-C power port Standby indicator AC output power button AC ON/OFF DC ON/OFF Main power button Product information Network port 12 V DC output power button Model number: EFD500-RC Battery supply voltage: 3.04.5 VDC Product battery type: AAA (No. 7) Wired connection USB-C power voltage: 5.0 VDC Network port power voltage: 12 VDC (DELTA Pro only) Operating temperature: 0°C45°C Special tip: After connecting successfully, the remote control screen will display the same content as the DELTA Pro screen. Wireless connection Connection steps 1. Press the power button to turn on the machine; 2. Press and hold the remote control's frequency pairing button until the remote control icon flashes; 3. Press and hold the DELTA Pro frequency pairing button until the remote control icon flashes. 4. The remote control icon will stay illuminated when the connection is successful. Frequency pairing button Power button Display Remote control icon Standby indicator AC ON/OFF DC ON/OFF Main power button Power on: Press the power button Power off: Press and hold the power button Illuminate LCD screen: Press the main power button Tip: The Bluetooth standby feature requires a dial test with the DELTA Pro The three statuses of the remote control are shown in the following figure 1. The remote control is not connected; 2. The remote control has connected to the machine successfully; 3. The remote control has connected to the machine successfully and the machine is turned off; 1 2 3 How to install Holder front Screw holes x4 Method 1: Screw the holder to the wall, then simply attach the remote control to the holder. Tips: 1. If the wall is made of wood, you can screw it in directly. 2. If the wall is made of concrete, a wall plug is required. Holder back Affix 3M adhesive here Method 2: Use 3M adhesive to affix the holder to the wall, then simply attach the remote control to the holder. Special tips: The remote control enables the DELTA Pro to be powered on remotely; The DELTA Pro's Standby Switch needs to be switched to the ON position and the machine must be paired with the remote control before shutting down; FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.Adobe Illustrator 24.0 (Windows) 3-Heights™ PDF Optimization API 6.9.0.3 (http://www -tools.com)