Product Overview
This document provides visual documentation and dimensional references for the HTC NE20 wireless earphones, as submitted for FCC certification. The product consists of a charging case and two individual earbuds.
FCC Identification
The device is identified by the FCC ID: 2BHJR-NE20.
Visual Documentation and Dimensions
The following descriptions detail the physical appearance and measured dimensions of the HTC NE20 wireless earphones and their charging case, as depicted in the provided images with accompanying rulers.
Charging Case
Image 1: Charging Case (Top View)A black wireless earphone charging case is shown from a top-down perspective. A wooden ruler is placed alongside it, indicating measurements from approximately 28 to 36 on one scale and 1cm to 5cm on another. The case has a square-like shape with rounded corners and a dark, possibly glossy, finish.
Image 2: Charging Case (Open)The same black wireless earphone charging case is shown open. Inside, two orange earbud holders are visible, with the black earbuds presumably seated within them. A wooden ruler is placed alongside, showing measurements from approximately 28 to 42 on one scale and 1cm to 12cm on another.
Individual Earbuds
Image 3: Earbud (Side Angle)A single black wireless earbud is displayed from a side angle. A wooden ruler is positioned next to it, with measurements from approximately 32 to 39 on one scale and 1cm to 5cm on another. The earbud has an ergonomic shape designed to fit in the ear.
Image 4: Earbud (Logo Visible)A single black wireless earbud is shown, featuring the "HTC" logo printed on its outer surface. A wooden ruler is placed alongside, indicating measurements from approximately 31 to 40 on one scale and 1cm to 6cm on another. The earbud's shape is visible, including the part that would enter the ear canal.
Image 5: Earbud (Different Angle)Another view of a single black wireless earbud, similar to Image 3, showing its form factor. A wooden ruler is present, with measurements from approximately 31 to 40 on one scale and 1cm to 6cm on another.
Image 6: Earbud (Logo Visible, Different Angle)A single black wireless earbud is presented, again displaying the "HTC" logo. A wooden ruler is positioned next to it, with measurements from approximately 27 to 35 on one scale and 1cm to 7cm on another.
Image 7: Earbud (Another Angle)A single black wireless earbud is shown from a slightly different angle than previous individual earbud images. A wooden ruler is placed alongside, with measurements from approximately 31 to 39 on one scale and 1cm to 6cm on another. The "HTC" logo is visible.
Image 8: Earbud (Logo Visible, Final Angle)The final image shows a single black wireless earbud, similar to Image 6, with the "HTC" logo visible. A wooden ruler is present, with measurements from approximately 27 to 34 on one scale and 1cm to 7cm on another.
