User Manual for LINTEM models including: DSWW-003 Smart Up and Down Outdoor Wall Lights, DSWW-003, Smart Up and Down Outdoor Wall Lights, Up and Down Outdoor Wall Lights, Down Outdoor Wall Lights, Outdoor Wall Lights, Wall Lights, Lights, Smart Lights, Lights DSWW-003

LSWW-03 说明书(转曲)

User manual

ShenZhen HuiHaiHe Technology Co.,Ltd. DSWW Smart Wall Lamp 2BDDD-DSWW 2BDDDDSWW dsww

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 9 Pages, 1.94MB

Document Document

LiNTEM


I Safety Instructions

I

WARNING: TO AVOID ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING THIS FIXTURE.

Read and follow all the safety instructions:

· If you are not familiar with the local electrical codes, it is recommended that you consult with a qualified electrician.

· Before installation, shut off power at the main fuse or circuit breaker box. Be aware that turning off the wall switch is not sufficient to prevent electrical shock.

· To avoid sensor damage by lightning or electrical surge, make sure the grounding wire is securely connected.

· Do not attempt to take the fixture apart.

Note: The fixture only associates with the on/off switch. The brightness-control switch might not be feasible.

I Introduction

I

Thank you for choosing Lintem smart wall light. The product is suitable for wet locations, ideal for your entrance, patio, garden, garage, porch, backyard etc. On the Lintem app, you can switch the light on and off, adjust the brightness, customize the lighting effects, and set the music mode that syncs lighting to the music.

I Specifications

I

Product Name

Model Number

Voltage

Working Tempeature

Smart Wall Lamp

DSWW-003

100-240V AC 50/60Hz

-4° F~140°F

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.